Setting Guide (Video Edition)
Table Of Contents
2
Camera FirmwareCamera Firmware
This guide is for camera “C” rmware version 2.xx.
Viewing the Firmware Version and Updating FirmwareViewing the Firmware Version and Updating Firmware
You can view the rmware version and update the camera rmware via [Firmware version] in the
setup menu. The rmware can be updated using either a computer or a smart device (smartphone
or tablet).
Using a computer: To check for updates, visit the Nikon Download Center at the URL below. Information
on performing updates is available on the rmware download page.
https://downloadcenter.nikonimglib.com
Using a smart device: Once you have paired the camera and smart device using the SnapBridge app,
the app will notify you when a new rmware update is available, allowing you to download it to
the camera memory card. Information on performing updates is available via the online help for
the SnapBridge app. Note that you may not be notied of updates as soon as they are available.
Changes to Video-Related Features in “C” Firmware Version 2.Changes to Video-Related Features in “C” Firmware Version 2.xxxx
Camera “C” rmware version 2.xx includes the following changes to the video-related features
available in rmware version 1.xx (changes to other features are not listed):
■ Video Recording
The borders of the shooting display now turn red during video recording (06, 65).
■ Video File Types
RAW options are now available for [Video le type] in the video recording menu (020).
■ Video Quality
[Video quality (N‑RAW)] has been added to the video recording menu (024).
[Extended oversampling] has been added to the video recording menu (026).
■ Exposure
[Extended shutter speeds (mode M)] has been added to the Custom Settings menu in position
g9 (041).
■ Focus
[Wide‑area AF (C1)] and [Wide‑area AF (C2)] have been added to the options available for AF-area
mode (043).
[Focus point selection speed] has been added to the Custom Settings menu in position a14
(047).
■ Controls and Displays
[View video info] has been added to the options available for Custom Setting g1 [Customize i
menu] (057).
Custom Setting g2 [Custom controls] now supports additional controls and roles (058).
[Fine ISO control (mode M)] has been added to the Custom Settings menu in position g8 (061).
[Brightness information display] has been added to the Custom Settings menu in position g14
(063).
The [Histogram] options for Custom Setting g15 [Custom monitor shooting display] and g16
[Custom viewnder shooting display] have been replaced by [Brightness information] (064).
[Red REC frame indicator] has been added to the Custom Settings menu in position g17 (065).
[Auto temperature cutout] has been added to the setup menu (066).