Setting Guide (Video Edition)
Table Of Contents
26
Settings
26
Picture Quality, Continued
W W Extended OversamplingExtended Oversampling
Selecting [ON] optimizes image readout for improved image quality
when [3840×2160; 60p] or [3840×2160; 50p] is chosen for [Frame size/
frame rate] in the video recording menu.
Settings can be adjusted using [Extended oversampling] in the video
recording menu.
Note that the drain on the battery increases when [ON] is selected.
Extended oversampling does not apply to RAW footage lmed with
[ON] selected.
ISO SensitivityISO Sensitivity
Videos recorded in modes P, S, and A are shot using auto ISO sensitiv-
ity (ISO AUTO). You can, however, select an upper limit to prevent the
camera choosing too high a value. In mode M, you also have the option of adjusting ISO sensitivity
manually.
■ Modes P, S, and A.
The camera adjusts ISO sensitivity automatically in response to shoot-
ing conditions, choosing from values of from ISO64 to Hi2.0; the cho-
sen value is shown in the shooting display and control panel.
ISO sensitivities of Hi 0.3–Hi 2.0 are not available during RAW video
recording.
■ Mode M
Auto ISO sensitivity control can be enabled or disabled by holding the
S button and rotating the sub-command dial; the display shows
ISO AUTO when auto ISO sensitivity control is enabled and ISO when
it is disabled. If desired, auto ISO sensitivity control can also be en-
abled or disabled using [ISO sensitivity settings]> [Auto ISO control
(mode M)] in the video recording menu.
When auto ISO sensitivity control is disabled (i.e., when ISO appears in
the shooting display and control panel), ISO sensitivity can be manu-
ally set to values between ISO 64 and Hi 2.0 by holding the S button
and rotating the main command dial. If desired, ISO sensitivity can also
be adjusted using [ISO sensitivity settings]> [ISO sensitivity (mode
M)] in the video recording menu. ISO sensitivities of Hi0.3 – Hi2.0 are
not available during RAW video recording.
If [On (1/6 EV)] is selected for Custom Setting g8 [Fine ISO control
(mode M)], ISO sensitivity in the range ISO 64 to 25600 can be adjusted
in increments of
1
⁄
6
EV (
0
61).
Your selection will be shown in the shooting display and control panel.
S button
ii-button menu-button menu
—
Camera controlsCamera controls —
Other menusOther menus
4
ii-button menu-button menu
4
Camera controlsCamera controls
4
Other menusOther menus
4