Setting Guide (Video Edition)
Table Of Contents
34
Settings
34
Picture Quality, Continued
HLG QualityHLG Quality
Adjust HLG video image processing options for use when [HLG] is cho-
sen for tone mode.
HLG quality can be adjusted using [HLG quality] in the video recording
menu.
■ HLG Quality Settings
[Quick sharp]
Use [Quick sharp] to quickly adjust levels for balanced [Sharpening], [Mid‑range sharpening], and
[Clarity]. These parameters can also be adjusted individually.
Manual
adjustments
[Sharpening] Control the sharpness of details and outlines.
[Mid‑range
sharpening]
Adjust the sharpness of patterns and lines in the range between [Sharpening] and [Clarity].
[Clarity] Adjust overall sharpness and the sharpness of thicker outlines without affecting brightness or dynamic range.
[Contrast] Adjust contrast.
[Saturation] Control the vividness of colors.
[Hue] Adjust hue.
High ISO NRHigh ISO NR
Reduce “noise” (randomly-spaced bright pixels) in videos recorded at
high ISO sensitivities.
Choose a setting using the [High ISO NR] item in the video recording menu.
To enable noise reduction at all ISO sensitivities, select [High], [Nor‑
mal], or [Low]. The higher the sensitivity, the greater the eect.
The amount of noise reduction performed can be selected from (in
order from high to low) [High], [Normal], and [Low].
Note that edges may soften and the picture may lose denition at
higher settings.
If [O] is selected, noise reduction will be performed only as required.
The amount of noise reduction performed is always lower than when
[Low] is selected.
High ISO noise reduction is not available during RAW recording.
ii-button menu-button menu
4
Camera controlsCamera controls —
Other menusOther menus
4
ii-button menu-button menu
—
Camera controlsCamera controls —
Other menusOther menus
4