Setting Guide (Video Edition)
Table Of Contents
37
Settings
Picture Quality, Continued
37
Electronic VRElectronic VR
Choose whether to enable electronic vibration reduction in video mode.
1
With the camera in video mode, press the i button and then high-
light [Electronic VR] and press J.
Options will be displayed.
You can also select an option using the command dials before
pressing the J button.
2
Press 4 or 2 to highlight the desired option and press J to select.
To exit to the shooting display, press the i button again.
Electronic Vibration Reduction
• Electronic vibration reduction is xed at [OFF] at a frame size of 7680× 4320 and at frame rates of
120p or 100p.
• Selecting [ON] reduces the size of the crop, slightly increasing the apparent zoom ratio.
• Selecting [ON] may result in a slight delay before the image in the display follows the movement of
the camera when the camera is panned horizontally or vertically.
• Electronic vibration reduction is not available during RAW recording.
ii-button menu-button menu
4
Camera controlsCamera controls —
Other menusOther menus
4