Setting Guide (Video Edition)

47
Settings
Focus, Continued
47
Focus PeakingFocus Peaking
When focus peaking is enabled in manual focus mode, objects that are
in focus are indicated by colored outlines in the display.
Settings can be adjusted using Custom Setting a13 [Focus peaking]>
[Focus peaking display].
■ Focus Peaking Display
Select [ON] to enable focus peaking. This helps when it comes to deter-
mining what portions of the frame are currently in focus.
Area in focus
Focus Peaking Display
Using Custom Setting g2 [Custom controls], you can assign [Focus peaking] to a control and then
use it to turn focus peaking on or o (058).
■ Focus Peaking Sensitivity
Choose the depth that will be shown as being in focus.
 Choose [3 (high sensitivity)] for greater depth and [1 (low sensitivity)] for reduced depth.
■ Focus Peaking Highlight Color
Choose the highlight color.
W W Focus Point Selection SpeedFocus Point Selection Speed
Choose the speed at which the camera cycles through focus points
while the multi selector or sub-selector is pressed.
Use Custom Setting a14 [Focus point selection speed] to choose from
settings of [Low], [Normal], and [High].
ii-button menu-button menu
4
Camera controlsCamera controls
4
Other menusOther menus
4
ii-button menu-button menu
—
Camera controlsCamera controls —
Other menusOther menus
4