Setting Guide (Video Edition)

Table Of Contents

Settings

Controls and Displays, Continued

Zebra PatternZebra Pattern

Choose whether a zebra pattern is used to indicate selected tone rang-

es.

Settings can be adjusted using Custom Setting g11 [Zebra pattern].

[Pattern tone range]

Choose the tone range shown by the zebra pattern.

• [Highlights]: Highlights (the brightest portions of the image) are shown by a zebra pattern. High-

lights can be deﬁned using [Highlight threshold].

• [Mid‑tones]: Mid-tones (areas of middling brightness) are shown by a zebra pattern. Mid-tones can

be deﬁned using [Mid‑tone range].

• [Zebra pattern o]: Turn oﬀ the zebra pattern display.

[Pattern]

Choose a zebra stripe pattern ([Pattern 1] or [Pattern 2]).

Pattern 2Pattern 1

[Highlight threshold]

Choose the brightness needed to trigger the zebra display when [Highlights] is selected for [Pattern

tone range].

• Choose from values of from 120 to 255. The lower the value, the greater the range of brightnesses that

will be shown as highlights.

• If 255 is selected, the display will show only areas that are potentially overexposed.

[Mid‑tone range]

Choose the brightness needed to trigger the zebra display when [Mid‑tones] is selected for [Pattern

tone range].

• The [Value] around which the mid-tone range is deﬁned can be anywhere from 0 to 255. [Range] is

the range of brightnesses around this value.

• Press 4 or 2 to highlight items and press 1 or 3 to change.

Caution: Zebra Pattern

If both the zebra display and focus peaking are enabled in manual focus mode, only focus peaking will

take eect. To view the zebra display in manual focus mode, select [OFF] for Custom Setting a13 [Focus

peaking]> [Focus peaking display].

Turning the Zebra Display On and O Using Camera Controls

• Zebra pattern can be assigned to a control using Custom Setting g2 [Custom controls]. Pressing the

control to which [Pattern tone range] is assigned cycles the zebra pattern display in the order [High‑

lights], [Mid‑tones], and [Zebra pattern o].

• The tone ranges displayed can be restricted using Custom Setting g12 [Limit zebra pattern tone

range]. If [Highlights] or [Mid‑tones] is selected, pressing the control to which [Pattern tone range]

is assigned will display a zebra pattern only over areas in the selected tone range; pressing the control

a second time hides the zebra pattern.

ii-button menu-button menu

Camera controlsCamera controls

Other menusOther menus