Reference Guide (PDF Edition)

Table Of Contents
Alerts and Error Messages
This section lists the alerts and error messages that appear in the camera display.
Alerts
The following alerts appear in the camera display:
Alert Problem/solution
H
Low b
attery.
Ready a spare b
attery.
l
Lens is not correctly attached.
Ensure that lens is correctly attached.
Ensure that retractable lenses are extended.
This indicator is also displayed when a non-CPU lens is attached via a
mount adapter, but in this case no action need be taken.
Bulb (flashes)
“Bulb” selected in mode S.
Change shutter speed.
Select mode M.
Time (flashes)
Time” selected in mode S.
Change shutter speed.
Select mode M.
(Exposure
indicators and
shutter speed or
aperture display
flash)
Subject too bright; limits of camera exposure metering system exceeded.
Lower ISO sensitivity.
Mode P: Use third-party ND (neutral density) filter (filter can also be used if
alert is still displayed after following settings are adjusted in mode S or A).
Mode S: Choose faster shutter speed.
Mode A: Choose smaller aperture (higher f‑number).
Subject too dark; limits of camera exposure metering system exceeded.
Increase ISO sensitivity.
Mode P: Use optional flash unit (flash can also be used if alert is still
displayed after following settings are adjusted in mode S or A).
Mode S: Choose slower shutter speed.
Mode A: Choose wider aperture (lower f‑number).
772
Alerts and Error Messages