Reference Guide (PDF Edition)

Table Of Contents
Troubleshooting Wireless LAN
Connections
R
efer to this section for infor
mation on errors involving wireless LAN connections.
For information on the Wireless Transmitter Utility, see the utility’s online help.
Problems and Solutions
Solutions to some common issues are list
ed below.
Problem Solution
The camera displays a wireless error.
The camera displays a TCP/IP error
.
The camera displays an FTP error.
Connection settings require adjustment. Check
settings for the wireless router, FTP server, or host
computer and adjust camera settings appropriately
(
0 302, 0 316).
Check the error code, if any. For more information, see
“Error Codes” (0 340).
“Connecting to computer” does not clear
from the camera display.
Check fir
ewall settings (
0 307, 0 320).
The camera displays a “no memory card”
error.
The memor
y card is inserted incorrectly or not at all.
Check that card is inserted correctly (
0 82).
Upload is interrupted and fails to resume.
Upload will resume if the camera is turned off and
then on again (0 336).
The connection is unreliable.
If the camera is connected in infrastructure mode,
check that the router is set t
o a channel between 1
and 8 (
0 731, 0 736).
339
Troubleshooting Wireless LAN Connections