Reference Guide (PDF Edition)

The roles that can be assigned are listed below. The roles available vary with the control.
Role Description
K
[Select center
focus point]
Pressing the contr
ol selects the center focus point.
F
[Save focus
position]
Holding the control saves the current focus position.
The saved position can be restored using a control to which
[Recall focus position] has been assigned (“memory recall”).
When saving the focus position, you can choose whether it
can be recalled using any of the controls to which [Recall
focus position] is assigned ([Save to all]) or using only a
specific control ([Save individually]).
For more information, see “Saving and Recalling Focus
Positions” (
0 601).
H
[Recall focus
position]
Pressing the contr
ol recalls a focus position saved using a control
to which [Save focus position] has been assigned.
For more information, see “Saving and Recalling Focus
Positions” (
0 601).
z
[Switch eyes]
Press the contr
ol to choose the eye used for focus when the
camera detects the eyes of a human or animal portrait subject.
d
[AF-ar
ea mode]
Holding the control selects a pr
eset AF-area mode. The AF-area
mode previously in effect is rest
ored when the control is released.
To choose the AF-area mode, press 2 when [AF-area mode]
is highlighted.
5
[AF-area mode+
AF-ON]
Holding the control selects a pr
eset AF-area mode and initiates
autofocus. The AF-ar
ea mode previously in effect is restored
when the control is released.
To choose the AF-area mode, press 2 when [AF-area mode+
AF-ON] is highlighted.
A
[AF-ON] Press the control to focus using autofocus.
F
[AF lock only] Focus locks while the control is pressed.
592
f2: Custom Controls (Shooting)