Reference Guide (PDF Edition)

Role Description
E
[Exposure
compensation]
When the exposure compensation dial is r
otated to C, exposure
compensation can be adjusted either by holding the control and
rotating a command dial or by rotating the lens control ring.
9
[ISO sensitivity]
When the ISO sensitivity dial is rotated to C, ISO sensitivity can
be adjusted either by holding the control and rotating the main
command dial or by rotating the lens control ring.
Hold the control and rotate the sub-command dial to select
from ISO AUTO (auto ISO sensitivity control enabled) and ISO
(auto ISO sensitivity control disabled).
m
[White balance]
To choose a white balance option, hold the control and rotate the
main command dial. Some options offer sub-options that can be
selected by rotating the sub-command dial.
h
[Set Picture
Control]
Press the control and rotate a command dial to choose a Picture
Control.
g
[Set Picture
Control (HLG)]
Press the control and rotate a command dial to choose an HLG
Picture Control.
y
[Active D-Lighting]
Press the control and rotate a command dial to adjust Active
D-Lighting.
h
[Skin softening]
Press the control and rotate a command dial to adjust skin
softening.
i
[Portrait
impression
balance]
Press the control and rotate a command dial to choose a portrait
impression balance mode.
w
[Metering]
Press the control and rotate a command dial to choose a
metering option.
I
[Flash mode/
compensation]
Press the control and rotate the main command dial to choose a
flash mode and the sub-command dial to adjust flash output.
v
[Release mode]
Hold the control and rotate the main command dial to choose
a release mode. Options for the selected mode, if any, can be
chosen by holding the control and rotating the sub-command
dial.
597
f2: Custom Controls (Shooting)