Reference Guide (PDF Edition)

Role Description
z
[Focus mode/AF-
area mode]
Hold the control and r
otate the main command dial to choose
the focus mode, the sub-command dial to choose the AF-area
mode.
t
[Auto bracketing]
Press the control and rotate the main command dial to choose
the number of shots and the sub-command dial to select the
bracketing increment or Active D-Lighting amount.
$
[Multiple
exposure]
Press the control and rotate the main command dial to choose
the mode and the sub-command dial to choose the number of
shots.
2
[HDR overlay]
Press the control and rotate the main command dial to choose
the mode and the sub-command dial to adjust HDR strength.
5
[Pixel shift
shooting]
Press the control and rotate the main command dial to choose
the pixel shift shooting mode and the sub-command dial to
choose the number of shots.
9
[Focus-point lock]
To lock focus-point selection, hold the control while using the
multi selector to choose the focus point.
v
[1 step spd/
aperture]
Make adjustments to shutter speed and aperture in increments
of 1EV.
In modes S and M, shutter speed can be adjusted in
increments of 1EV by holding the control and rotating the
main command dial.
In modes A and M, aperture can be adjusted in increments of
1EV by holding the control and rotating the sub-command
dial.
w
[Choose non-CPU
lens number]
Press the control and rotate a command dial to choose a lens
number saved using the [Non-CPU lens data] item in the setup
menu.
X
[Focus (M/A)]
Autofocus can be over-ridden by rotating the lens control ring
(autofocus with manual override). The control ring can be used
for manual focus while the shutter-release button is pressed
halfway. To refocus using autofocus, lift your finger from the
shutter-release button and then press it halfway again.
598
f2: Custom Controls (Shooting)