Reference Guide (PDF Edition)

Assign Touch Fn
The roles that can be assigned to t
ouch Fn are listed below.
Role Description
[Move focus point]
The focus point can be positioned by sliding a finger over the t
ouch Fn area.
You can also position the focus point by double-tapping the desired location
in the monitor.
[Switch eyes]
When the camera detects the eyes of a human or animal portrait subject,
you can choose the eye used for focus by tapping the touch Fn area in the
monitor.
[Framing grid]
Tapping the touch Fn area in the monitor displays a framing grid in the
viewfinder. Tap again to hide the grid. The grid type can be selected using
Custom Setting d15 or g13 [Grid type].
[Zoom on/off]
Tap the touch Fn area in the monitor to zoom the display in the viewfinder in
on the area around the current focus point. Tap again to cancel zoom.
[Virtual horizon]
Tap the touch Fn area in the monitor to enable the virtual horizon display
in the viewfinder. Tap again to hide the display. The display type can be
selected using Custom Setting d17 [Virtual horizon type].
Touch Fn Area
Choose the area of the monit
or used for touch Fn. The areas for use when the camera is rotated to
take pictures in “tall” and “wide” orientations can be selected separately.
611
f4: Touch Fn