Reference Guide (PDF Edition)

Tip: The Remote Control Status Lamp (Z f)
Color Behavior Status
Green Flashes approximately once a second Searching for paired camera.
Green Flashes quickly (approximately twice a second) Pairing.
Green Flashes approximately once every three seconds Connected to camera.
Orange Flashes once Photography started.
Orange Flashes twice “Bulb” or “Time” photography ended.
Red Flashes once Video recording started.
Red Flashes twice Video recording ended.
Tip: Adjusting Focus from the Camera
The shutter-r
elease button on the remote control cannot be pressed halfway; to focus before shooting,
press the camera shutter-release button halfway, lock focus, and only then press the shutter-release
button on the remote control. To allow focus to be locked by pressing the camera shutter-release
button halfway, you will need to adjust camera settings as described below.
To enable focus lock when AF‑S is selected for focus mode, choose [Focus] for Custom Setting a2
[AF‑S priority selection].
To enable focus lock when AF‑C is selected for focus mode, choose [Focus] or [Focus+ release] for
Custom Setting a1 [AF‑C priority selection].
Tip: The Standby Timer
To reactivate the camera after the standby timer has expired and the monitor and viewfinder have
turned off, turn the remote control on and press and hold its shutter-release or video-record button.
821
Other Compatible Accessories