DIGITAL CAMERA Reference Guide • Read this document thoroughly before using the camera. • To ensure proper use of the camera, be sure to read “For Your Safety” (page 26). • After reading this document, keep it readily accessible for future reference.
Table of Contents When Your First Photo Can’t Wait. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Getting Ready. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Taking and Viewing Pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Before You Begin. . . . . . . . . . . .
Navigating the Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 The Fn Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Using the Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 The MENU Button. . . . . . . . . . . . . . . .
Focus Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 AF-Area Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Subject Detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Focus-Point Selection. . . . . . . . . . .
Bit Rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Video Recording: Shooting Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 Video Image Area Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 Points to Note When Filming Videos. . . . . . . .
Deleting Pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Using the Delete Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Deleting Multiple Pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 Retouching Photographs. . . . . . . . . . . . . . .
Recorders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282 Adjusting Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 YCbCr and Bit Depth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 HDMI Output and Tone Mode. . . . . .
Connecting to Other Cameras. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 What Inter-camera Connections Can Do for You. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 Camera-Based Remote Photography (Synchronized Release). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 Clock Synchronization (Synchronize Date and Time). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Image Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383 Tone Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384 Image Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Image Size Settings. .
AF-Area Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418 AF/MF Subject Detection Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419 MF Subject Detection Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420 Vibration Reduction. . . . . . . . . . . . . . . . .
Set Picture Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495 Manage Picture Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496 HLG Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497 Active D‑Lighting. . . . . . . .
a2: AF-S Priority Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 a3: Focus Tracking with Lock-On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532 Blocked Shot AF Response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532 a4: Focus Points Used. . . . . . . . . . . . . . . . . . . .
d4: Sync. Release Mode Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 558 d5: Shutter Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 559 d6: Extended Shutter Speeds (M). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 560 d7: Limit Selectable Image Area. . . . . . . . . . . .
Command Dials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 608 f4: Touch Fn. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 610 Enable/Disable Touch Fn. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 610 Assign Touch Fn. . . . . . . . . . . . . .
Pattern Tone Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 640 Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 640 Highlight Threshold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 640 Mid-tone Range. . . . . . . . . . . . .
Monitor Brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 674 Monitor Color Balance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 675 Viewfinder Brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 676 Viewfinder Color Balance. . . . . . . . .
Audio Output (Playback). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 702 Camera Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 703 Beep On/Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 703 Volume. . . . . . . . . . . . . . . . . . . .
Wireless Remote (ML-L7) Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 729 Wireless Remote Connection (ML‑L7). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 729 Save Wireless Remote Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 729 Delete Wireless Remote Controller. . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758 Before Contacting Customer Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758 Problems and Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 Battery/Display. . . . . . . . . . . . . . . . . . . . . . . . . .
Nikon Z f Digital Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 838 Approved Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 852 Portable Chargers (Power Banks). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 853 Memory Card Capacity. . . . . . . . . . . . . . . . . . . . . .
W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 877 Z. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When Your First Photo Can’t Wait Getting Ready 1 Insert the battery and a memory card into the camera ( 0 82). For information on charging the battery, see “Charging the Battery” ( 0 86). 2 Attach a lens ( 0 90). Align the mounting mark on the lens with the matching mark on the camera body (q) and rotate the lens in the direction shown (w). A strap can be attached to the camera. For more information, see “Attaching the Strap” ( 0 81).
Taking and Viewing Pictures 1 Rotate the mode selector to AUTO (b). 2 To focus, press the shutter-release button halfway (i.e., lightly press the shutter-release button, stopping when it is pressed halfway; 0 95). 3 Without lifting your finger from the shutter-release button, press the button the rest of the way down to take the picture. 4 View the picture ( 0 104).
Before You Begin Package Contents Be sure all items listed here were included with your camera. Camera body EN‑EL15c rechargeable Li-ion battery with terminal cover AN‑DC27 strap ( 0 81) UC‑E25 USB cable ( 0 86) User’s Manual Warranty BS‑1 accessory shoe cover (comes attached to camera; 0 817) DK‑33 rubber eyecup (comes attached to camera; 0 814) BF‑N1 body cap Memory cards are sold separately.
About This Document Symbols This document employs the following symbols. Use them to help locate the information you need. D This icon marks notes, information that should be read before using this product. Tip This icon marks tips, additional information you may find helpful when using this product. 0 This icon marks references to other sections in this document. Conventions This camera uses SD, SDHC, SDXC, microSD, microSDHC, and microSDXC memory cards.
For Your Safety To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product. After reading these safety instructions, keep them readily accessible for future reference. DANGER: Failure to observe the precautions marked with this icon carries a high risk of death or severe injury. WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
WARNING Do not use this product in the presence of flammable dust or gas such as propane, gasoline or aerosols. Failure to observe this precaution could result in explosion or fire. Do not directly view the sun or other bright light source through the lens. Failure to observe this precaution could result in visual impairment. Do not aim the flash or AF‑assist illuminator at the operator of a motor vehicle. Failure to observe this precaution could result in accidents.
CAUTION Do not leave the lens pointed at the sun or other strong light sources. Light focused by the lens could cause fire or damage to product’s internal parts. When shooting backlit subjects, keep the sun well out of the frame. Sunlight focused into the camera when the sun is close to the frame could cause fire. Turn this product off when its use is prohibited. Disable wireless features when the use of wireless equipment is prohibited.
DANGER (Batteries) Do not mishandle batteries. Failure to observe the following precautions could result in the batteries leaking, overheating, rupturing, or catching fire: Use only rechargeable batteries approved for use in this product. Do not expose batteries to flame or excessive heat. Do not disassemble. Do not short‑circuit the terminals by touching them to necklaces, hairpins, or other metal objects. Do not expose batteries or the products in which they are inserted to powerful physical shocks.
WARNING (Batteries) Discontinue use immediately should you notice any changes in the batteries, such as discoloration or deformation. Cease charging EN‑EL15c rechargeable batteries if they do not charge in the specified period of time. Failure to observe these precautions could result in the batteries leaking, overheating, rupturing, or catching fire. When batteries are no longer needed, insulate the terminals with tape.
Notices No part of the documentation included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. Nikon reserves the right to change the appearance and specifications of the hardware and software described in this documentation at any time and without prior notice. Nikon will not be held liable for any damages resulting from the use of this product.
● Use Only Nikon Brand Electronic Accessories Nikon cameras include complex electronic circuitry. Only Nikon brand electronic accessories (including lenses, chargers, batteries, AC adapters, and flash accessories) certified by Nikon specifically for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry. The use of non‑Nikon electronic accessories could damage the camera and may void your Nikon warranty.
D Before Taking Important Pictures Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
Parts of the Camera Camera Body 1 2 3 4 5 6 7 8 9 9 10 15 1 2 3 4 5 6 7 8 14 12 11 13 9 10 11 12 ISO sensitivity dial ( 0 152) ISO sensitivity dial lock release ( 0 152) Stereo microphone ( 0 100) Shutter-speed dial lock release ( 0 132, 0 135) Shutter-speed dial ( 0 132, 0 135) Power switch ( 0 93) Shutter-release button ( 0 95) Video-record button ( 0 100) 13 14 15 34 Eyelet for camera strap ( 0 81) Exposure compensation dial ( 0 143) Control panel ( 0 41) Photo/video selector ( 0 40, 0 95, 0
1 2 6 11 1 2 3 4 3 7 4 8 9 10 5 5 6 7 8 9 10 AF-assist illuminator ( 0 98, 0 542) Red-eye reduction lamp ( 0 359) Self-timer lamp ( 0 151) Monitor mode button (M; 0 56, 0 679) USB connector cover Cover for microphone, headphone, and HDMI connectors 11 35 Lens mounting mark ( 0 90) Charge lamp ( 0 86) USB connector ( 0 298, 0 711) Headphone connector ( 0 518) HDMI connector ( 0 280) Connector for external microphone ( 0 815) Body cap ( 0 90) Camera Body
7 6 5 4 3 2 1 1 2 3 4 5 6 7 Monitor ( 0 60, 0 124) Eyepiece release ( 0 814) Delete button (O; 0 107, 0 233) 0 104, 0 199) Playback button (K; 36 Rubber eyecup ( 0 814) Viewfinder ( 0 51) Eye sensor ( 0 56) Camera Body
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 Diopter adjustment control ( 0 59) AE/AF lock (A) button ( 0 126, 0 141) Protect button (g; 9 10 11 0 223) Speaker “i” button (i; 0 75, 0 215) Main command dial Multi selector ( 0 69) OK button (J; 12 0 69) 37 Playback zoom in button (X; 0 128, 0 200, 0 221) DISP button (d; 0 44) 0 68) MENU button (G; Playback zoom out/thumbnails button (W; 0 200, 0 221) Help button (Q; 0 73) Memory card access lamp ( 0 98, 0 102) Camera Body
1 2 9 3 8 4 5 6 7 1 2 3 4 5 6 7 Lens release button ( 0 91) Lens mount ( 0 90, 0 130) CPU contacts Image sensor ( 0 827) Tripod socket Battery chamber/memory card slot cover 8 9 Battery chamber/memory card slot cover latch Fn button ( 0 67) Sub-command dial D Do Not Touch the Image Sensor Under no circumstances should you exert pressure on the image sensor, poke it with cleaning tools, or subject it to powerful air currents from a blower.
Tip: Product Serial Number The serial number for this product can be found by opening the monitor.
The Photo/Video Selector Choose between photo and video modes. 1 2 3 Black-and-white photo mode Photo mode Video mode 1 2 3 Black-and-White Photo Mode Rotate the photo/video selector to B&W (black-and-white photo mode) to take photos in black and white. The choice of Picture Controls available for [Set Picture Control] in the photo shooting menu ( 0 176) is limited to [Monochrome], [Flat Monochrome], [Deep Tone Monochrome], and custom Picture Controls for which these serve as a base.
The Control Panel The control panel lights when the camera is on. It functions as an aperture display ( 0 134, 0 135). An aperture value of f/0.95 appears in the control panel as [.95]. When [ON] is selected for Custom Setting d6 [Extended shutter speeds (M)], the aperture value is replaced by an exposure progress display at shutter speeds of 60 s or slower. A [--] warning may be displayed if the lens is not correctly attached.
The Monitor At default settings, the following indicators appear in the monitor. For a full list of the indicators that may be displayed, see “The Monitor” in the section on “Camera Displays” ( 0 777) in the “Technical Notes” chapter.
14 13 12 11 10 1 2 3 9 1 2 3 4 5 6 8 7 6 7 8 9 10 11 12 13 14 Exposure indicator Exposure ( 0 136) Exposure compensation ( 0 143) i icon ( 0 75, 0 215) Battery indicator ( 0 84) Number of exposures remaining ( 0 85, 0 854) ISO sensitivity ( 0 152) ISO sensitivity indicator ( 0 152) Auto ISO sensitivity indicator ( 0 155) 43 5 4 Aperture ( 0 134, 0 135) Shutter speed ( 0 132, 0 135) Metering ( 0 411) Touch shooting ( 0 124) Vibration reduction indicator ( 0 421) Shutter type ( 0 559) Focus point (
Tip: Using the Monitor with the Camera in “Tall” Orientation In photo mode, the playback, i menu, and shooting displays rotate to match camera orientation. Tip: Choosing a Display Press the DISP button to cycle the shooting display. Choose from up to five displays, each with a customizable selection of icons and indicators. The items displayed can be selected using Custom Setting d17 [Custom monitor shooting display] ( 0 575).
Video Mode 1 2 3 4 5 6 7 8 10 9 1 2 3 4 5 Recording indicator “No video” indicator ( 0 102) Recording indicator (red border; Length of footage recorded 6 7 8 9 10 0 648) Frame size and rate ( 0 189) Destination ( 0 489) 45 Available recording time Image area ( 0 192) Video file type ( 0 187) Sound level ( 0 513) Microphone sensitivity ( 0 513) The Monitor
Tip: Using the Monitor with the Camera in “Tall” Orientation In video mode, the playback and playback i menu displays rotate to match camera orientation.
Angling the Monitor The monitor can be angled and rotated. 180° 90° 180° Normal use: The monitor is normally used in storage position with the screen facing outward. Low-angle shots: Tilt the monitor up to take shots with the camera held low.
High-angle shots: Tilt the monitor down to take shots with the camera held high. Self-portraits: Rotating the monitor to face the same direction as the lens enables self-portrait mode (0 49). D Cautions: Using the Monitor Rotate the monitor gently within the limits of its hinges. Using excessive force could damage the camera or monitor. We recommend returning the monitor to the storage position with the screen facing inward to keep it free of dust and scratches when not in use.
Self-Portrait Mode Rotating the monitor to the self-portrait position triggers self-portrait mode. The monitor shows a mirror image of the view through the lens, but pictures recorded by the camera are not mirrored. If desired, you can tap the self-timer icon (q) in the monitor to set the self-timer and choose the number of shots taken when the timer expires. When the exposure compensation dial is rotated to C, you can also adjust exposure compensation by tapping the exposure compensation icon (w).
D Notes on Self-Portrait Mode Note the following points when using the camera in self-portrait mode: Selecting self-portrait mode disables all controls other than the power switch, the shutter-release and video-record buttons, the mode and photo/video selectors, and the shutter speed, ISO sensitivity, and exposure compensation dials.
The Viewfinder At default settings, the following indicators appear in the viewfinder. For a full list of the indicators that may be displayed, see “The Viewfinder” in the section on “Camera Displays” ( 0 785) in the “Technical Notes” chapter.
12 11 10 9 8 7 1 2 3 4 5 6 5 4 6 7 8 9 10 11 12 Battery indicator ( 0 84) Number of exposures remaining ( 0 85, 0 854) ISO sensitivity ( 0 152) ISO sensitivity indicator ( 0 152) Auto ISO sensitivity indicator ( 0 155) Exposure indicator Exposure ( 0 136) Exposure compensation ( 0 143) 52 3 2 1 Aperture ( 0 134, 0 135) Shutter speed ( 0 132, 0 135) Shooting mode ( 0 131) Vibration reduction indicator ( 0 421) Metering ( 0 411) Shutter type ( 0 559) Focus point ( 0 123) The Viewfinder
Tip: Using the Viewfinder with the Camera in “Tall” Orientation In photo mode, the playback, i menu, and shooting displays rotate to match camera orientation. Tip: Choosing a Display Press the DISP button to cycle the shooting display. Choose from up to four displays, each with a customizable selection of icons and indicators. The items displayed can be selected using Custom Setting d18 [Custom viewfinder shooting display] ( 0 577).
Video Mode 1 2 3 4 56 7 8 10 9 1 2 3 4 5 6 7 8 9 10 Recording indicator “No video” indicator ( 0 102) Length of footage recorded Destination ( 0 489) Available recording time Frame size and rate ( 0 189) 54 Image area ( 0 192) Video file type ( 0 187) Recording indicator (red border; Sound level ( 0 513) Microphone sensitivity ( 0 513) 0 648) The Viewfinder
Tip: Using the Viewfinder with the Camera in “Tall” Orientation In video mode, the playback and playback i menu displays rotate to match camera orientation.
The Monitor Mode Button and the Eye Sensor Placing your eye to the viewfinder activates the eye sensor, switching the display from the monitor to the viewfinder. Note that the eye sensor will also respond to other objects, such as your fingers. The viewfinder can be used for menus and playback if desired. Press the M (monitor mode) button to cycle between viewfinder and monitor displays.
Press the M button to cycle through the displays as follows. [Automatic display switch]: The camera automatically switches between the viewfinder and monitor displays based on information from the eye sensor. [Viewfinder only]: The monitor remains blank. The viewfinder is used for shooting, menus, and playback. In photo mode, the viewfinder display also lights for a few seconds after the camera is turned on and after the standby timer is activated by pressing the shutter-release button halfway.
[Prioritize viewfinder (1)]: In photo mode, the camera functions in a manner similar to existing digital SLR cameras. Placing your eye to the viewfinder turns the viewfinder on; the monitor remains off after you take your eye away. In video mode, the displays function as per [Automatic display switch]. [Prioritize viewfinder (2)]: In photo mode, the viewfinder turns on both when you look through it and also for a few seconds after the camera is turned on or the shutter-release button is pressed halfway.
D The Diopter Adjustment Control The viewfinder can be focused by rotating the diopter adjustment control. Be careful not to put your fingers or fingernails in your eye. Tip: Extended Use When using the viewfinder for extended periods, you can select [Adjust for ease of viewing] for Custom Setting d9 [View mode (photo Lv)] to ensure that viewfinder brightness and hue are adjusted for ease of viewing.
Touch Controls The touch-sensitive monitor offers a variety of controls that can be operated by touching the display with your fingers. Focusing and Releasing the Shutter Touch the monitor to focus on the selected point (touch AF). In photo mode, the shutter will be released when you lift your finger from the display (touch shutter). Touch shutter/AF settings can be adjusted by tapping the W icon ( 0 124).
Adjusting Settings Tap highlighted settings in the display. You can then choose the desired option by tapping icons or sliders. Tap Z or press J to select the chosen option and return to the previous display. Tip: Touch Fn When [ON] is selected for Custom Setting f4 [Touch Fn] > [Enable/disable touch Fn], you can use monitor touch controls to adjust settings while framing pictures in the viewfinder. Touch Fn is available only when the monitor is in storage position with the screen facing outward.
Playback Flick left or right to view other pictures during full-frame playback. In full-frame playback, touching the bottom of the display brings up a frame-advance bar. Slide your finger left or right over the bar to scroll rapidly to other pictures. To zoom in on a picture displayed during full-frame playback, use a stretch gesture or give the display two quick taps. You can adjust the zoom ratio using stretch gestures to zoom in and pinch gestures to zoom out.
Viewing Videos Videos are indicated by a 1 icon; to start playback, tap the a icon. Tap Z to exit to full-frame playback. The i Menu Tap the i icon to display the i menu during shooting ( 0 75). Tap items to view and change options. You can choose the items displayed in the i menu ( 0 80).
Text Entry When a keyboard is displayed, you can enter text by tapping the keys. 1 2 3 1 Text display area Keyboard area Keyboard selection 2 3 To position the cursor, tap e or f or tap directly in the text display area. To cycle through the upper- and lower-case and symbol keyboards, tap the keyboard selection button.
Navigating the Menus Slide up or down to scroll. Tap a menu icon to choose a menu. Tap menu items to display options. You can then choose the desired option by tapping icons or sliders. To exit without changing settings, tap Z.
D Cautions: The Touch Screen The touch screen responds to static electricity. It may not respond when touched with fingernails or gloved hands. For improved response when using the touch screen with gloves, select [ON] for [Touch controls] > [Glove mode] in the setup menu. Do not touch the screen with sharp objects. Do not use excessive force. The screen may not respond when covered with third-party protective films. The screen may not respond when touched simultaneously in multiple locations.
The Fn Button Use the Fn button for quick access to frequently-used settings. The role the Fn button plays can be chosen via Custom Settings. Different roles can be assigned for photography ( 0 591), video recording ( 0 626), and playback ( 0 605). At default settings, the Fn button is used for white balance ( 0 157). The assigned setting can be adjusted by holding the Fn button and rotating a command dial. In some cases, adjustments can be made using both the main and sub-command dials.
Using the Menus The MENU Button Press the G button to view the menus. 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 D PLAYBACK MENU ( 0 649) 8 9 d (help) icon ( 0 73) Current settings C PHOTO SHOOTING MENU ( 0 369) 1 VIDEO RECORDING MENU ( 0 484) A CUSTOM SETTINGS MENU ( 0 522) B SETUP MENU ( 0 668) F NETWORK MENU ( 0 722) O MY MENU/m RECENT SETTINGS * ( 0 751) * You can choose the menu displayed. The default is [MY MENU].
Using the Menus You can navigate the menus using the multi selector and J button. 1 2 3 4 5 1 Move cursor up Select the highlighted item Display sub-menu, select highlighted item, or move cursor right Move cursor down Cancel and return to previous menu, or move cursor left Highlight the icon for the current menu. Press 4 to place the cursor in the menu-selection area. 2 Select a menu. Press 1 or 3 to select the desired menu.
3 Position the cursor in the selected menu. Press 2 to position the cursor in the selected menu. 4 Highlight a menu item. Press 1 or 3 to highlight a menu item. 5 Display options. Press 2 to display options for the selected menu item.
6 Highlight an option. Press 1 or 3 to highlight an option. 7 Select the highlighted option. Press J to save changes and exit. To exit without making a selection, press the G button. To exit the menus and return to shooting mode, press the shutterrelease button halfway.
D Grayed-Out Items Some items and menu options may be unavailable depending on camera status. Unavailable items are displayed in gray. In some cases, pressing J when a grayed-out item is highlighted will display a message explaining why the item is unavailable.
Tip: ON/OFF Only Items If the only options available for the current item are [ON] and [OFF], you can switch from [ON] to [OFF] or vice versa simply by pressing J, pressing the multi selector right (2), or tapping the item in the display. Tip: The d (Help) Icon Where available, a description of the currently-selected item can be viewed by pressing the W (Q) button. Press 1 or 3 to scroll. Press W (Q) again to return to the menus.
Tip: Text Entry A keyboard is displayed when text entry is required, for example if you are called on to enter a file name or the like. Enter text as described below. 1 2 3 1 Text display area Keyboard area Keyboard selection 2 3 Enter characters at the current cursor position by highlighting them with the multi selector arrow keys and then pressing J. The cursor can be moved left or right in the text display area by rotating either of the command dials.
The i Button (i Menu) For quick access to frequently-used settings, press the i button or tap the i icon to view the i menu. Different menus are displayed in photo, video, and playback modes. Options can be viewed by tapping items in the display or by highlighting items and pressing J; selections can then be made using the multi selector. Items for which the camera displays a command dial guide can be adjusted by highlighting them in the i menu and rotating a command dial.
D Grayed-Out Items Some items and menu options may be unavailable depending on camera status. Unavailable items are displayed in gray. Tip: Using the i Menu with the Camera in “Tall” Orientation When the camera is rotated to take or view pictures in “tall” (portrait) orientation, the i menu displays rotate to match. In video mode, only the playback i menu rotates to match camera orientation.
The Still Photography i Menu Pressing the i button in photo mode displays the items listed below. Highlight the desired item using the multi selector and press J to view options.
The Video i Menu Pressing the i button in video mode displays the items listed below. Highlight the desired item using the multi selector and press J to view options.
The Playback i Menu Pressing the i button during playback displays a context-sensitive i menu of playback options.
Customizing the i Menu The items displayed in the i menu during shooting can be chosen using Custom Setting f1 or g1 [Customize i menu]. 1 Highlight Custom Setting f1 or g1 [Customize i menu] and press J. See “The G Button” ( 0 68) for information on using the menus. 2 Highlight the position you want to change and press J. A list of the items available for the selected position will be displayed. 3 Highlight the desired item and press J.
First Steps Attaching the Strap To attach a strap, follow the steps below.
Inserting the Battery and Memory Cards The camera is equipped with two memory card slots: a slot that takes one SD memory card (q) and another that takes one microSD memory card (w), for a total of two cards, one of each type. Turn the camera off before inserting or removing the battery or memory cards. Holding the memory card in the orientation shown, slide it straight into the slot until it clicks into place.
D Removing the Battery To remove the battery, turn the camera off and open the battery chamber/memory card slot cover. Press the battery latch in the direction shown by the arrow to release the battery and then remove the battery by hand. D Removing Memory Cards Before removing the memory cards, confirm that the memory card access lamp is off and then turn the camera off and open the battery chamber/memory card slot cover. Press the card in to eject it (q) and then slide it from the camera (w).
Battery Level The battery level is shown in the shooting display while the camera is on. The battery level display changes as the battery level diminishes, from L through K to H. When the battery level falls to H, suspend shooting and charge the battery or ready a spare battery. If the message [Shutter release disabled. Recharge battery.] is displayed, charge or exchange the battery. D The Standby Timer The camera uses a standby timer to help reduce the drain on the battery.
Number of Exposures Remaining When you turn the camera on, the shooting display will show the number of photographs that can be taken at current settings. Values over 1000 are rounded down to the nearest hundred. For example, values between 1500 and 1599 are shown as 1.5 k. Tip: The Write Protect Switch SD memory cards are equipped with a write-protect switch. Sliding the switch to the “lock” position write-protects the card, protecting the data it contains.
Charging the Battery Charge the supplied EN‑EL15c battery before use. The battery can be charged while inserted in the camera by connecting the camera to an optional EH-8P AC adapter using the supplied USB cable. D Cautions: Using Batteries Read and follow the warnings and cautions in “For Your Safety” ( 0 26) and “Caring for the Camera and Battery: Cautions” ( 0 831). 1 Insert the battery ( 0 82).
2 After confirming that the camera is off, connect it to an optional EH-8P AC adapter using the supplied USB cable (q). Plug the AC adapter into a household power outlet. The battery will charge while the camera is off. Keep the plug straight during insertion and removal. The camera charge lamp (w) lights amber while charging is in progress. The lamp turns off when charging is complete. Assuming a 5 V/500 mA input, an exhausted battery will fully charge in about 2 hours and 40 minutes.
D Cautions: Charging Only EN‑EL15c and EN‑EL15b batteries can be charged while inserted in the camera. EN‑EL15a batteries can be charged using an optional MH‑25a battery charger. Charging errors caused by, for example, elevated camera temperatures or attempts to charge an EN‑EL15a are indicated by the charge lamp flashing rapidly for about 30 seconds before turning off.
Tip: Optional EH‑7P Charging AC Adapters: Charging The battery can also be charged using an optional EH‑7P charging AC adapter. After confirming that the camera is off, connect the adapter to the camera via USB and plug it in. The battery will charge while the camera is off. Keep the plug straight during insertion and removal.
Attaching a Lens The camera can be used with Z mount lenses. For more information on lenses, see the lens documentation available from the Nikon Download Center. The lens generally used in this document for illustrative purposes is a NIKKOR Z 40mm f/2 (SE). Be careful to prevent dust entering the camera. Confirm that the camera is off before attaching the lens. - Remove the camera body cap (q, w) and rear lens cap (e, r). - Align the mounting marks on the camera (t) and lens (y).
- Rotate the lens as shown until it clicks into place (u). Remove the front lens cap before taking pictures. D F Mount Lenses Be sure to attach an FTZ II or FTZ mount adapter (available separately) to the camera before using F mount lenses ( 0 815). Attempting to attach F mount lenses directly to the camera could damage the lens or image sensor. Detaching Lenses After turning the camera off, press and hold the lens release button (q) while turning the lens in the direction shown (w).
Opening the Monitor Rotate the monitor gently; do not use force.
Camera Setup Turn the camera on, choose a language, and set the clock. Before using the camera for the first time, follow the steps below to choose a language and time zone and set the clock so that the correct time and date will be recorded with any pictures you take. 1 Press G, and in the setup menu highlight [Language] and press 2. For information on using the menus, see “Using the Menus” ( 0 69). 2 Select a language.
5 Turn daylight saving time on or off. Select [Daylight saving time] in the [Time zone and date] display. Select [ON] (daylight saving time on) or [OFF] (daylight saving time off). Selecting [ON] advances the clock one hour; to undo the effect, select [OFF]. 6 Set the clock. Select [Date and time] in the [Time zone and date] display.
Basic Photography and Playback Taking Photographs (b Mode) Select b (auto) mode for simple, “point-and-shoot” photography. D Lenses with Retractable Barrels Lenses with retractable barrels must be extended before use. Rotate the zoom ring as shown until the lens clicks into place in the extended position. 1 Select photo mode by rotating the photo/video selector to C. 2 Rotate the mode selector to AUTO (b).
3 Rotate the ISO sensitivity dial to C. At the default settings for AUTO (b) mode, the camera will adjust ISO sensitivity automatically to assist exposure control while the ISO sensitivity dial is rotated to C. 4 Ready the camera. Holding the handgrip in your right hand and cradling the camera body or lens with your left, bring your elbows in against the sides of your chest. Landscape (wide) orientation 5 Portrait (tall) orientation Frame the photograph. Frame your subject in the shooting display.
6 To focus, press the shutter-release button halfway (i.e., lightly press the shutter-release button, stopping when it is pressed halfway). The focus point will be displayed in green when the subject is in focus. The AF-assist illuminator may light to assist the focus operation if the subject is poorly lit. If the camera is unable to focus, the out-of-focus indicator will flash red.
D The AF-Assist Illuminator Do not obstruct the AF-assist illuminator while it is lit. D Cautions: Taking Photographs You may notice the following in the shooting display.
Tip: The Touch Shutter You can also take a photograph by touching the monitor. Touch your subject to focus and lift your finger to release the shutter ( 0 124). Tip: The Exposure Compensation Dial Exposure can be adjusted by rotating the exposure compensation dial ( 0 143). Tip: Using Display Zoom in Photo Mode To zoom in on the display in photo mode (to a maximum of approximately 12×), press the X button. Use the X and W (Q) buttons to zoom in and out.
Recording Videos (b Mode) b (auto) mode can be used for simple, “point-and-shoot” video recording. 1 Select video mode by rotating the photo/video selector to 1. Note that optional flash units cannot be used when the camera is in video mode. 2 Rotate the mode selector to AUTO (b).
3 Press the video-record button to start recording. A recording indicator will be displayed and the borders of the shooting display will turn red. The display also shows the time remaining, or in other words the approximate amount of new footage that can be recorded to the memory card. 1 2 1 2 3 3 4 Recording indicator Video recording time (length of footage recorded) Available recording time Recording indicator (red border) 4 Sound is recorded via the built-in microphone.
D The Memory Card Access Lamp The memory card access lamp will light while the video is being recorded. Do not open the battery chamber/memory card slot cover or remove the memory card or battery. D The 0 Icon A 0 icon indicates that videos cannot be recorded.
D Cautions: Video Recording You may notice the following in the shooting display.
Playback Press the K button to view photos and videos in the monitor or viewfinder after shooting. Press 4 or 2 or flick left or right to view additional pictures. Videos are indicated by a 1 icon at the top left corner of the display. Tap the a icon in the display or press the J button to start playback. To end playback and return to shooting mode, press the shutter-release button halfway.
Viewing Videos The video playback display and controls are described below. The Video Playback Display During video playback, the display shows the length of the video, the current playback position, and the other indicators listed below. Your approximate position in the video can also be ascertained from the video progress bar.
Operation Start slow-motion playback Jog rewind/ advance Description Press 3 while the video is paused to start slow-motion playback. Press 4 or 2 while the video is paused to rewind or advance one frame at a time. Keep 4 or 2 pressed for continuous rewind or advance. Skip 10 s Rotate the sub-command dial one stop to skip ahead or back 10 s. Skip 10 frames Rotate the main command dial one stop to skip ahead or back 10 frames.
Deleting Unwanted Pictures Press the O button to delete the current picture. Note that pictures cannot be recovered once deleted. Display a picture you want to delete and press the O button to display a confirmation dialog. Press the O button again to delete the picture and return to playback. To exit without deleting the picture, press K.
Shooting Settings Image Recording Options (Image Area, Quality, and Size) Adjusting Image Area Settings Image area settings can be displayed by selecting [Image area] in the photo shooting menu.
Choose Image Area Choose the image area. The following options are available: Option Description c [FX (36×24)] Record pictures in FX format with an angle of view equivalent to a 35 mm format camera. a [DX (24×16)] Pictures are recorded in DX format. To calculate the approximate focal length of the lens in 35 mm format, multiply by 1.5. Image-area selection is fixed at [DX (24×16)] when a DX lens is attached. m [1:1 (24×24)] Pictures are recorded with an aspect ratio of 1 : 1.
Adjusting Image Quality Use the [Image quality] item in the photo shooting menu to choose the image quality option employed when photographs are recorded. Option [RAW + JPEG/HEIF finem] [RAW + JPEG/HEIF fine] [RAW + JPEG/HEIF normalm] [RAW + JPEG/HEIF normal] [RAW + JPEG/HEIF basicm] [RAW + JPEG/HEIF basic] [RAW] Description Record two copies of each photo: an NEF (RAW) picture and either a JPEG or HEIF copy.
Tip: NEF (RAW) NEF (RAW) files have the extension “*.nef”. The process of converting NEF (RAW) pictures to other highly-portable formats such as JPEG is referred to as “NEF (RAW) processing”. During this process, Picture Controls and settings such as exposure compensation and white balance can be freely adjusted. The RAW data themselves are unaffected by NEF (RAW) processing and their quality will remain intact even if the pictures are processed multiple times at different settings.
Choosing an Image Size Use [Image size settings] in the photo shooting menu to choose a size for new photographs. Image Size Choose a size for new JPEG and HEIF pictures. The size for photographs recorded in formats other than NEF (RAW) can be chosen from [Large], [Medium], and [Small]. NEF (RAW) pictures are recorded at a size of [Large]. The number of pixels in the picture varies with the option selected for image area ( 0 108).
Image area [16:9 (36×20)] Image size Size when printed at 300 dpi Large (6048 × 3400 pixels) Approx. 51.2 × 28.8 cm/20.2 × 11.3 in. Medium (4528 × 2544 pixels) Approx. 38.3 × 21.5 cm/15.1 × 8.5 in. Small (3024 × 1696 pixels) Approx. 25.6 × 14.4 cm/10.1 × 5.7 in. Tip: Print Size Print size in inches equals image size in pixels divided by printer resolution in dots per inch (dpi; 1 inch = 2.54 cm).
Focus Focus Mode Control how the camera focuses. Choosing a Focus Mode The focus mode can be selected using the [Focus mode] item in the i menu, photo shooting menu, or video recording menu ( 0 75, 0 417, 0 507). Option AF‑S [Single AF] Description Use with stationary subjects. When you press the shutter-release button halfway to focus, the focus point will turn from red to green and focus will lock. If the camera fails to focus, the focus point will flash red and the shutter release will be disabled.
D Cautions: Autofocus The camera may be unable to focus if: - the subject contains lines parallel to the long edge of the frame, - the subject lacks contrast, - the subject in the focus point contains areas of sharply contrasting brightness, - the focus point includes night-time spot lighting or a neon sign or other light source that changes in brightness, - flicker or banding appears under fluorescent, mercury-vapor, sodium-vapor, or similar lighting, - a cross (star) filter or other special filter is used
AF-Area Mode Choose how the camera selects the focus point for autofocus. In modes other than [Auto-area AF], the focus point can be positioned using the multi selector. Choosing an AF-Area Mode The AF-area mode can be selected using the [AF-area mode/subj. detection] item in the i menu ( 0 75) or the [AF-area mode] items in the photo shooting and video recording menus ( 0 418, 0 508).
Option d [Dynamic-area AF (S)] e [Dynamic-area AF (M)] f [Dynamic-area AF (L)] f [Wide-area AF (S)] g [Wide-area AF (L)] Description The camera focuses on a point selected by the user. If the subject briefly leaves the selected point, the camera will focus based on information from surrounding focus points. This option is only available when photo mode is selected and [Continuous AF] is chosen for focus mode.
Option 8 [Wide-area AF (C1)] 9 [Wide-area AF (C2)] Description Choose the dimensions (measured in focus points) of the focus areas used for the selected AF-area. This can be used, for example, if the size and shape of the area employed for focus can be determined in advance with a fair degree of accuracy. On selecting [Wide-area AF (C1)] or [Wide-area AF (C2)], you will be prompted to choose the AF-area size. Use 1 and 3 to choose the height and 4 and 2 to choose the width.
D Caution: 3D-Tracking and Subject Tracking The camera may be unable to track subjects that: are similar in color, brightness, or pattern to the background, change visibly in size, color, or brightness, are too large or too small, too bright or too dark, move quickly, or are obscured by other objects or leave the frame. Tip: s: The Center Focus Point In all AF-area modes except [Auto-area AF], [3D-tracking], and [Subject-tracking AF], a dot appears in the focus point when it is in the center of the frame.
Subject Detection The class of subjects given priority during autofocus and electronic rangefinding can be chosen using the [AF/MF subject detection options] items in the photo shooting and video recording menus, which offer a choice of [Auto], [People], [Animal], [Vehicle], [Airplanes], and [Subject detection off]. The subject detected by the camera is indicated by a focus point.
If [Auto] is selected, the camera will detect humans, animals, and vehicles and choose a subject for focus automatically. To disable subject detection altogether, choose [Subject detection off]. Using Subject Detection During Autofocus Subject detection is available during autofocus when [Wide-area AF (S)], [Wide-area AF (L)], [Wide-area AF (C1)], [Wide-area AF (C2)], [3D-tracking], [Subject-tracking AF], or [Auto-area AF] is selected for [AF-area mode].
D Caution: Subject Detection Using “People” Subject detection may not perform as expected if: the subject’s face is too large or small relative to the frame, the subject’s face is too brightly or dimly lit, the subject is wearing glasses or sunglasses, the subject’s face or eyes are obscured by hair or other objects, or the subject moves excessively during shooting.
Focus-Point Selection Except when [Auto-area AF] is selected for AF-area mode, the focus point can be selected manually, allowing photographs to be composed with the subject positioned almost anywhere in the frame. Use the multi selector to select the focus point while the standby timer is on. Pressing J selects the center focus point.
The Touch Shutter Touch the display to focus on the selected point. The shutter will be released when you lift your finger from the display. Tap the icon shown in the illustration to choose the operation performed by tapping the display. Option Description Touch the display to focus on the selected point and lift your finger to release the shutter. W [Touch shutter/touch AF] When choosing an eye using touch controls, note that the camera may not focus on the eye on the side you intend.
Option Description Touch the display to focus on the selected point. Lifting your finger from the display does not release the shutter. V [Touch AF] If [Subject-tracking AF] or [Auto-area AF] is selected for AF-area mode, the camera will focus on and track the subject at the chosen point. Press J to end subject tracking. D Cautions: Taking Pictures Using Touch Shooting Options Touch controls cannot be used for manual focus.
Focus Lock Use focus lock in cases in which the camera has trouble focusing with autofocus. Use focus lock to lock focus on the current subject when AF‑C is selected for focus mode. When using focus lock, choose an AF-area mode other than [Auto-area AF]. 1 2 Position the subject in the selected focus point and press the shutter-release button halfway. Press the A (g) button. Keeping the shutter-release button pressed halfway (q), press the A (g) button (w) to lock focus.
D Locking Focus When AF-S Is Selected for Focus Mode Focus locks while the shutter-release button is pressed halfway. You can also lock focus by pressing the A (g) button. D Taking Multiple Shots at the Same Focus Distance If you locked focus by pressing the A (g) button, focus will remain locked between shots if you keep the A (g) button pressed. If you locked focus by pressing the shutter-release button halfway, focus will remain locked if you keep the button pressed halfway between shots.
Manual Focus Manual focus is available in manual focus mode. Use manual focus when, for example, autofocus does not produce the desired results. Position the focus point over your subject and rotate the focus or control ring until the subject is in focus. For greater precision, press the X button to zoom in on the view through the lens.
The focus indicator (I) in the shooting display can be used to confirm whether the subject in the selected focus point is in focus (electronic rangefinding). The focus point will also light green when the subject is in focus. 1 2 Focus distance indicator Focus indicator 1 2 Focus indicator (steady) (steady) (steady) (flashes) Description The subject is in focus. Focus is in front of the subject. Focus is behind the subject. The camera is unable to focus.
D Lenses with Focus-Mode Selection Manual focus mode can be chosen using focus-mode selection controls on the lens (where available). D The Focal Plane Mark and Flange-Back Distance Focus distance is measured from the focal plane mark (E) on the camera body, which shows the position of the focal plane inside the camera (q). Use this mark when measuring the distance to your subject for manual focus or macro photography.
Exposure Choosing a Shooting Mode Use the mode selector to choose the shooting mode. Mode AUTO Description Auto ( 0 95, 0 100) A simple “point-and-shoot” mode that leaves the camera in charge of settings. P Programmed auto ( 0 132) Use for snapshots and in other situations in which there is little time to adjust camera settings. The camera chooses both shutter speed and aperture automatically. S Shutter-priority auto ( 0 132) Use to freeze or blur motion.
P (Programmed Auto) In this mode, the camera automatically adjusts shutter speed and aperture according to a built-in program to ensure optimal exposure in most situations. Different combinations of shutter speed and aperture that produce the same exposure can be selected by rotating the main command dial (“flexible program”). - While flexible program is in effect, a flexible program indicator (U) is displayed.
To select X or T, or to choose another setting after selecting 1/3 STEP, X, T, or B, hold the shutter speed dial lock release while rotating the dial. 4 1 2 3 4 3 2 1 ¹⁄₈₀₀₀ – ¹⁄₂ s 1 – 4 s (red) X (flash sync; 0 578) 1/3 STEP (¹⁄₃ EV steps) When [Electronic front-curtain shutter] is selected for Custom Setting d5 [Shutter type], rotating the shutter speed dial to ¹⁄₈₀₀₀ or ¹⁄₄₀₀₀ sets shutter speed to ¹⁄₂₀₀₀ s.
A (Aperture-Priority Auto) In aperture-priority auto, you choose the aperture while the camera automatically adjusts shutter speed for optimal exposure. Aperture can be adjusted by rotating the sub-command dial. The minimum and maximum values for aperture vary with the lens.
M (Manual) You control both shutter speed and aperture. Choose this mode for long time-exposures of such subjects as fireworks or the night sky (“Bulb” or “Time” photography, 0 138). Shutter speed and aperture can be adjusted with reference to the exposure indicators. Rotate the shutter speed dial to choose a shutter speed. To select X or T, or to choose another setting after selecting 1/3 STEP, X, T, or B, hold the shutter speed dial lock release while rotating the dial.
Aperture can be adjusted by rotating the sub-command dial. The minimum and maximum values for aperture vary with the lens. D Exposure Indicators The exposure indicators in the monitor and viewfinder show whether the photograph would be underor over-exposed at current settings.
Tip: Extended Shutter Speeds For shutter speeds as slow as 900 s (15 minutes), select [ON] for Custom Setting d6 [Extended shutter speeds (M)] and choose the desired shutter speed after rotating the shutter speed dial to 1/3 STEP. Tip: Long Exposures At speeds slower than 1 s, the shutter speed displayed by the camera may differ from the actual exposure time. The actual exposure times at shutter speeds of 15 and 30 seconds, for example, are respectively 16 and 32 seconds.
Long Time-Exposures (Mode M Only) The camera offers two options for long time-exposures: “Bulb” and “Time”. Long time-exposures can be used for pictures of fireworks, night scenery, the stars, or moving lights. A 35-second exposure shot at a shutter speed of “Bulb” and an aperture of f/25 Shutter speed Description Bulb The shutter remains open while the shutter-release button is held down.
3 Rotate the shutter speed dial to choose a shutter speed of B (“Bulb”) or T (“Time”). Bulb Time If the shutter speed dial is currently set to 1/3 STEP, you can instead select a shutter speed of Bulb or Time using the main command dial. Note that the exposure indicators are not displayed. 4 Focus and start the exposure. “Bulb”: Press the shutter-release button all the way down to start the exposure. Keep the shutter-release button pressed during the exposure.
D Long Time-Exposures Note that “noise” (bright spots, randomly-spaced bright pixels or fog) may be present in long exposures. Bright spots and fog can be reduced by choosing [ON] for [Long exposure NR] in the photo shooting menu.
Autoexposure (AE) Lock Use autoexposure lock to lock exposure, preventing the camera adjusting exposure automatically. Exposure is locked by pressing the A (g) button. Keeping the A (g) button pressed locks exposure, preventing it changing in response to changes in composition or subject brightness. An AE-L icon will appear in the shooting display. If autofocus is enabled, press the shutter-release button halfway to focus before pressing the A (g) button. This locks both focus and exposure.
Tip: Locking Exposure with the Shutter-Release Button If [On (half press)] is selected for Custom Setting c1 [Shutter-release button AE-L], exposure will lock while the shutter-release button is pressed halfway. Tip: Metered Area With [Spot metering], exposure will be locked at the value metered in a circle centered on the current focus point. With [Center-weighted metering], exposure will be locked at a value weighted toward a 12-mm circle in the center of the display.
Exposure Compensation Exposure compensation is used to alter exposure from the value suggested by the camera. It can be used to make pictures brighter or darker. −1 EV No exposure compensation +1 EV Choosing a Value Using the Exposure Compensation Dial Rotate the exposure compensation dial to the desired setting. Exposure can be adjusted in the range +3 to –3 EV in steps of ¹⁄₃ EV. Higher values make the subject brighter, lower values darker.
Other Methods When the exposure compensation dial is rotated to C, exposure compensation can be adjusted in the range +5 to –5 EV (or in video mode, +3 to –3 EV) using: the command dials (enabled via Custom Setting b2 [Easy exposure compensation]), the i menu, touch controls (self-portrait mode only; 0 49), or custom controls ( 0 591, 0 626） Tip: Mode M In mode M, exposure compensation affects only the exposure indicator; shutter speed, aperture, and ISO sensitivity do not change.
Release Mode Choosing a Release Mode Use the [Release mode] item in the photo shooting menu to choose the operation performed when the shutter-release button is pressed all the way down. Mode U [Single frame] Description The camera takes one photograph each time the shutter-release button is pressed. The camera takes photographs at a selected rate while the shutterrelease button is pressed.
D The Burst Photography Shooting Display The shooting display shows the view through the lens in real time during burst photography in continuous low- and high-speed modes. D Frame Advance Rate The maximum frame advance rates for [Continuous H] and [Continuous H (extended)] vary with camera settings. Shutter type Release mode [Continuous H] [Continuous H (extended)] Image quality Mechanical shutter Electronic front- [Silent mode]: [ON] curtain shutter NEF (RAW)/NEF (RAW) + Approx. 7.0 fps Approx.
D Cautions: Burst Photography Depending on shooting conditions and memory card performance, the memory card access lamp may light for anywhere from a few tens of seconds to around a minute. Do not remove the memory card while the memory card access lamp is lit. Not only could any unrecorded pictures be lost, but the camera or memory card could be damaged. If the camera is switched off while the memory card access lamp is lit, it will not power off until all pictures in the buffer have been recorded.
Tip: The Memory Buffer While the shutter-release button is pressed halfway, the framecount display will show the number of pictures that can be stored in the memory buffer. When the buffer is full, the display will show r000 and the frame rate will drop. The number shown is approximate. The actual number of photos that can be stored in the memory buffer varies with camera settings and shooting conditions.
High-Speed Frame Capture (C30) For high-speed burst photography at a rate of 30 fps, select [C30] for [Release mode] in the photo shooting menu. The maximum length for bursts taken using high-speed frame capture is approximately four seconds. The photos recorded may also include the final pictures from frames buffered while the shutterrelease button is pressed halfway (“Pre-Release Capture”); to choose how much of the buffer is saved, use Custom Setting d3 [Pre-Release Capture options].
D High-Speed Frame Capture: Restrictions The choice of image areas is restricted to [FX (36×24)] and [DX (24×16)]. Image quality is fixed at [JPEG/HEIF normal] and pictures are recorded in JPEG format. Image size is fixed at [Large]. Shutter speed is limited to values of from ¹⁄₈₀₀₀ to ¹⁄₆₀ s. Exposure compensation is restricted to values between −3 and +3 EV, even when lower or higher values (−5 to +5 EV) are selected with the exposure compensation dial set to C.
Using the Self-Timer (E) In self-timer mode, pressing the shutter-release button all the way down starts a timer, and a photo is taken when the timer expires. 1 Select [Self-timer] for [Release mode] in the photo shooting menu. 2 Adjust self-timer settings using Custom Setting c2 [Self-timer]. [Self-timer delay]: Choose the length of the self-timer shutter-release delay. [Number of shots]: Choose the number of shots taken when the timer expires.
ISO Sensitivity The camera’s sensitivity to light (ISO sensitivity) can be adjusted according to the amount of light available. In general, choosing higher values allows faster shutter speeds at the same aperture. Adjusting ISO Sensitivity The ISO Sensitivity Dial ISO sensitivity can be adjusted by rotating the ISO sensitivity dial. Your selection is shown in the shooting display. Choose from settings of from ISO 100 to 64000.
Other Methods When the ISO sensitivity dial is rotated to C, ISO sensitivity can be adjusted using: - [ISO sensitivity settings] > [ISO sensitivity] in the photo shooting menu, - [ISO sensitivity settings] > [ISO sensitivity (mode M)] in the video recording menu, - touch controls, - the i menu, and - custom controls ( 0 591, 0 626） The values that can be selected using these methods are listed below. - Still photography: ISO 100 to 64000; the camera also supports settings below ISO 100 by about 0.3, 0.
D High ISO Sensitivities The higher the ISO sensitivity, the less light needed to make an exposure, allowing pictures to be taken when lighting is poor and helping prevent blur when the subject is in motion. Note, however, that the higher the sensitivity, the more likely the picture is to be affected by “noise” in the form of randomly-spaced bright pixels, fog, or lines. “Noise” can be reduced by enabling high ISO noise reduction.
Auto ISO Sensitivity Control Auto ISO sensitivity control automatically adjusts ISO sensitivity if optimal exposure cannot be achieved at the value selected by the user. You can select an upper limit for auto ISO sensitivity control (200–Hi 1.7) to prevent ISO sensitivity being raised too high. Enabling Auto ISO Sensitivity Control Auto ISO sensitivity control can be enabled in modes P, S, A, and M by selecting [ON] for [ISO sensitivity settings] > [Auto ISO sensitivity control] in the photo shooting menu.
D Cautions: Auto ISO Sensitivity Control If the value currently selected using the ISO sensitivity dial or [ISO sensitivity] is higher than that chosen for [Maximum sensitivity], the highest value will serve as the upper limit for auto ISO sensitivity control. During flash photography, shutter speed is limited to the range defined by the values selected for Custom Settings e1 [Flash sync speed] and e2 [Flash shutter speed].
White Balance About White Balance White balance ensures that colors appear natural regardless of the color of the light source. The default setting (4) is suitable for use with most light sources, but if it fails to produce the desired results, other settings can be selected according to the weather or light source. Adjusting White Balance White balance can be adjusted using the [White balance] item in the i menu, photo shooting menu, or video recording menu ( 0 75, 0 391, 0 494).
Options for the selected setting, if any, can be chosen by holding the Fn button and rotating the sub-command dial. Option Color temperature * Description The camera adjusts white balance for optimal results with most light sources. If an optional flash unit is used, white balance will be adjusted in accord with the conditions in effect when the flash fires. 4 [Auto] i [Keep white (reduce warm colors)] Approx. 3500– 8000 K Eliminate the warm color cast produced by incandescent lighting.
Option Color temperature * Description I [Fluorescent] m [Cool-white fluorescent] Approx. 4200 K n [Day white fluorescent] Approx. 5000 K o [Daylight fluorescent] Approx. 6500 K 5 [Flash] Approx. 5400 K K [Choose color temperature] Approx. 2500– 10000 K Use under fluorescent lighting; choose a bulb type according to the light source. Use for flash photography. Direct color-temperature selection. - To choose a color temperature, hold the Fn button and rotate the sub-command dial.
D D “Natural Light Auto” D [Natural light auto] may not produce the desired results under artificial light. Choose 4 [Auto] or an option that matches the light source. D Studio Flash Lighting 4 [Auto] may not produce the desired results with large studio flash units. Use preset manual white balance or set white balance to 5 [Flash] and use fine-tuning to adjust white balance.
Tip: Color Temperature The perceived color of a light source varies with the viewer; some may have a red cast while others appear blue. Color temperature is an objective measure of the color of a light source, expressed in Kelvins (K). The lower the color temperature, the redder the cast (q); the higher the temperature, the bluer the cast (w).
Fine-Tuning White Balance Each white balance option can be fine-tuned by up to six steps in either direction from the center along both the A (amber)–B (blue) and G (green)–M (magenta) axes. Using Buttons 1 Choose a white balance option by holding the Fn button and rotating a command dial. 2 Keeping the Fn button pressed, fine-tune white balance using the multi selector. Use the multi selector to position the cursor on the grid. The selected value is displayed to the right of the grid.
Using the Menus 1 Select [White balance] in the photo shooting or video recording menu, highlight the desired option, and press 2 as often as necessary to display fine-tuning options. For information on fine-tuning [Preset manual] white balance, see “Fine-Tuning Preset Manual White Balance” ( 0 175). 2 Fine-tune white balance. Use the multi selector to position the cursor on the grid. The selected value is displayed to the right of the grid.
Tip: The i Menu Pressing J when [White balance] is highlighted in the i menu displays a list of white balance options. If an option other than K [Choose color temperature] is highlighted, fine-tuning options can be displayed by pressing 3. Any changes to fine-tuning options can be previewed in the display. G: Increase green B: Increase blue A: Increase amber M: Increase magenta Tap the arrows in the display or use the multi selector to fine-tune white balance.
Tip: The Information Display To choose a white balance setting using the command dials, press the Fn button while shooting information is displayed. The selected setting can be fine-tuned using the multi selector while the Fn button is pressed. Tip: White Balance Fine-Tuning The colors on the fine-tuning axes are relative, not absolute. Selecting more of a color on a given axis does not necessarily result in that color appearing in pictures.
Choosing a Color Temperature Choose a color temperature by entering values for the A (amber)–B (blue) and G (green)–M (magenta) axes. Using Buttons 1 Hold the Fn button and rotate the main command dial to select K [Choose color temperature]. 2 Keeping the Fn button pressed, rotate the sub-command dial to choose a color temperature. Color temperature will change in increments of 1 mired.
3 Keeping the Fn button pressed, fine-tune white balance using the multi selector. Use the multi selector to position the cursor on the grid. The selected value is displayed to the right of the grid. The A (amber)–B (blue) axis corresponds to color temperature and is ruled in increments of 0.5. A change of 1 is equivalent to approximately 5 mired. The G (green)–M (magenta) axis has effects similar to color compensation filters and is ruled in increments of 0.25.
3 Fine-tune white balance. After choosing a color temperature, press the W (Q) button to display fine-tuning options. Use the multi selector to position the cursor on the grid. The cursor can be moved up to six steps from the center along either axis. The selected value is displayed to the right of the grid. The A (amber)–B (blue) axis corresponds to color temperature and is ruled in increments of 0.5. A change of 1 is equivalent to approximately 5 mired.
D Cautions: Color-Temperature Selection Do not use color-temperature selection with fluorescent light sources; instead, use the I [Fluorescent] option. When using color-temperature selection with other light sources, take a test shot to determine if the selected value is appropriate. Tip: The i Menu Pressing J when [White balance] is highlighted in the i menu displays a list of white balance options. When K [Choose color temperature] is highlighted, color temperature options can be viewed by pressing 3.
Preset Manual White balance settings such as 4 [Auto], J [Incandescent], and K [Choose color temperature] may fail to produce the desired results under mixed lighting or lighting with a strong color cast. Should this occur, white balance can be set to a value measured under the light source used in the final photograph. Two methods are available for setting preset white balance: Method Description Direct measurement Measure white balance in a selected area of the frame ( 0 170).
2 Select a preset. Hold the Fn button and rotate the sub-command dial until the desired white balance preset (d-1 to d-6) is displayed. 3 Select direct measurement mode. Release the Fn button briefly and then press it again to enter direct measurement mode. L will flash in the shooting display. A white balance target (r) will appear in the center of the frame.
4 Position the white balance target (r) over a white or gray object and measure a value for preset manual white balance. Position the target (r) using the multi selector. To measure white balance, press the shutter-release button all the way down or press J. White balance can be measured multiple times while direct measurement mode is in effect. You can also position the target (r) and measure white balance by tapping the display.
D The Preset Manual White Balance Menu The preset manual white balance menu can be accessed by selecting [White balance] > L [Preset manual] in the photo shooting menu. The preset manual white balance menu offers options for copying values for preset manual white balance from an existing photograph or adding comments to or protecting white balance presets. D Protected Presets White balance presets indicated by g icons are protected and cannot be changed.
Copying White Balance from a Photograph Follow the steps below to copy a value for white balance from an existing photograph to a selected preset. 1 Select [White balance] in the photo shooting or video recording menu, then highlight [Preset manual] and press 2. 2 Select a destination. Using the multi selector, highlight the destination preset (d-1 to d-6). Press X to view the preset manual white balance menu. 3 Choose [Select picture].
5 Copy white balance. Press J to copy the white balance value for the highlighted photograph to the selected preset. If the highlighted photograph has a comment, the comment will be copied to the comment for the selected preset. Tip: Fine-Tuning Preset Manual White Balance The selected preset can be fine-tuned by selecting [Fine-tune] in the preset manual white balance menu.
Picture Controls About Picture Controls Choose image processing (“Picture Control”) options for new photos according to the scene or your creative intent. Choosing a Picture Control Picture Controls can be selected using the [Set Picture Control] items in the i menu, photo shooting menu, and video recording menu. The selected option is shown by an icon in the shooting display.
Option Description Features gentle gradations from highlights to shadows, 2 [Flat Monochrome] 3 [Deep Tone Monochrome] Choose for slightly darker tones in the range from shadows to mid-tones, with brightness rapidly increasing as tones progress from mid-tones to highlights. o [Portrait] Smooth complexions for natural-looking portraits. 4 [Rich Tone Portrait] Produces more vivid results than [Portrait] while capturing details of the subject’s complexion and avoiding loss of detail in highlights.
Modifying Picture Controls Picture Controls can be adapted to suit the scene or the photographer’s creative intent. 1 Select a Picture Control. Select [Set Picture Control] in the photo shooting or video recording menu and then highlight the desired Picture Control and press 2. 2 Adjust settings. Press 1 or 3 to highlight settings and 4 or 2 to choose a value. Each press increments the highlighted value by 1. The options available vary with the Picture Control selected.
Picture Control Settings Option [Effect level] [Quick sharp] Description Displayed only when a Creative Picture Control is selected. Mute or heighten the effect of the selected Picture Control. Apply sharpening to areas of contrast within the picture. Adjusting [Quick sharp] simultaneously adjusts [Sharpening], [Midrange sharpening], and [Clarity] for well-balanced results. Choose higher values for heightened sharpness. Choose lower values for greater softness.
Option Description Displayed only with [Monochrome], [Flat Monochrome], [Deep Tone [Toning] Monochrome], and certain Creative Picture Controls. Choose a tint for monochrome pictures. Choose from 9 different tints, including cyanotype and old-fashioned sepia. Pressing 3 when an option other than [B&W] (black-and-white) is selected displays saturation options. [Toning] (Creative Picture Controls) Displayed only with certain Creative Picture Controls. Choose the shade of color used.
D The j Indicator The j indicator under the value display in the Picture Control setting menu indicates the previous value for the setting. D “A” (Auto) Selecting the [A] (auto) option available for some settings lets the camera adjust the setting automatically. Results vary with exposure and the position of the subject in the frame.
Tip: The i Menu Highlighting [Set Picture Control] in the i menu and pressing J displays a Picture Control list. Highlight a Picture Control, press 3 to display options, and then edit settings while previewing the effect in the display. Press 1 or 3 to highlight settings. Press 4 or 2 to choose a value in increments of 1, or rotate the sub-command dial to choose a value in increments of 0.25. The options available vary with the Picture Control selected.
Custom Picture Controls Save modified Picture Controls as custom Picture Controls. Option Description [Save/edit] Create a new custom Picture Control based on an existing preset or custom Picture Control, or edit existing custom Picture Controls. [Rename] Rename custom Picture Controls. [Delete] Delete custom Picture Controls. [Load/save] Copy custom Picture Controls to and from a memory card.
3 Select a Picture Control. Highlight an existing Picture Control and press 2 to display edit options. Note that the only Picture Controls available in black-andwhite photo mode are [Monochrome], [Flat Monochrome], and [Deep Tone Monochrome]. To save a copy of the highlighted Picture Control without further modification, press J. [Save as] options will be displayed; proceed to Step 5. 4 Adjust settings. The options and procedure are the same as for [Set Picture Control].
7 Press the X button. Text entry will end. The new Picture Control will be added to the Picture Control list.
D The Original Picture Control Icon The original preset Picture Control on which the custom Picture Control is based is indicated by an icon in the edit display. D Custom Picture Control Options The options available with custom Picture Controls are the same as those on which the custom Picture Control was based. D Sharing Custom Picture Controls The [Load/save] item in the [Manage Picture Control] menu can be used to copy custom Picture Controls from the camera to a memory card.
Video Recording Video File Types Use [Video file type] in the video recording menu to choose the video file type. You have a choice of MOV and MP4 formats. Option Description YCbCr This option assumes the footage will later undergo editing using a professional high-performance computer system of the type [H.265 10-bit (MOV)] typically employed for editing video. You have a choice of three tone modes: [SDR], [HLG], and [N-Log]. Footage is recorded using long GOP inter-frame compression.
Tone Mode To choose the tone mode, highlight [H.265 10-bit (MOV)] and press 2. Videos shot using [H.265 8-bit (MOV)] and [H.264 8-bit (MP4)] use [SDR]; tone-mode selection is not available. Option [SDR] [HLG] [N-Log] Description This mode supports a normal range of brightnesses (dynamic range). This mode supports HDR (high dynamic range; 0 195). It has a wider dynamic range than SDR. This mode uses Nikon’s unique log curve. Choose for pictures with a wide dynamic range.
Video Frame Size and Rate Options Video frame size (in pixels) and frame rate can be selected using [Frame size/frame rate] in the video recording menu. The options available for frame size vary with the settings chosen for [Video file type] in the video recording menu. Video file type Option 1 H.265 10-bit/8-bit H.
Bit Rate The bit rate varies with the video file type. Video file type Option H.265 10-bit H.265 8-bit Approx. 340 Mbps Approx. 300 Mbps [3840×2160; 60p] H.264 8-bit — [3840×2160; 50p] — [3840×2160; 30p] — [3840×2160; 25p] — [3840×2160; 24p] Approx. 190 Mbps Approx. 150 Mbps — [1920×1080; 120p] — [1920×1080; 100p] — [1920×1080; 60p] Approx. 100 Mbps Approx. 80 Mbps Approx. 50 Mbps Approx. 50 Mbps Approx. 40 Mbps Approx.
Video Recording: Shooting Mode The exposure settings that can be adjusted during filming vary with the shooting mode: Aperture Shutter speed ISO sensitivity 1 AUTO (b) — — — P (programmed auto) — — —2 S (shutter-priority auto) — 43 —2 A (aperture-priority auto) 4 — —2 M (manual) 4 43 44 Mode 1 The maximum ISO sensitivity for videos recorded with [ON] selected for [Electronic VR] in the video recording menu is ISO 51200.
Video Image Area Options The image area for videos can be selected using [Image area] > [Choose image area] in the video recording menu. The crop used for filming video varies with the option selected. Regardless of the option selected, the aspect ratio is 16 : 9. Select [FX] to shoot videos in what is referred to as “FX-based video format”, [DX] to shoot in “DX-based video format”. When [1920 × 1080; 120p] or [1920 × 1080; 100p] is selected for [Frame size/frame rate], image area is fixed at [FX].
The sizes of the different crops are shown below. Format Size FX-based video format Approx. 35.9 × 20.2 mm DX-based video format Approx. 23.7 × 13.3 mm DX-based video format is selected automatically when a DX lens is attached. Selecting [ON] for [Electronic VR] in the video recording menu reduces the size of the crop.
Points to Note When Filming Videos Note the following points when recording videos: Each video can be up to 125 minutes in length. Each video recorded to a card with a capacity of 32 GB or less may be saved across a maximum of 8 files. Each of these files will be a maximum of 4 GB in size. The number of files and the length of each file vary with the options selected for [Frame size/frame rate]. Depending on memory card write speed, shooting may end before the maximum length is reached.
Recording HLG Video Video recorded in Hybrid Log Gamma (HLG) format can be used for HDR broadcasting and the like. To record HLG video, select [H.265 10-bit (MOV)] for [Video file type] in the video recording menu and choose the [HLG] tone mode. o will appear in the shooting display. For optimal color reproduction when viewing HLG footage, use monitors, computers, operating systems, applications, and other equipment compatible with HLG.
D Camera Shooting and Playback Displays When [HLG] is selected for tone mode, the shooting and playback displays in the camera monitor and viewfinder may include “noise” in the form of randomly-spaced bright pixels, fog, or lines or may fail to accurately reproduce highlights and highly-saturated colors. For accurate tone reproduction, use monitors, computers, operating systems, applications, and other equipment compatible with HLG.
Recording N-Log Video Log recording uses light levels digitized via a log function. To enable log recording using Nikon’s unique “N-Log” log function, select [H.265 10-bit (MOV)] for [Video file type] in the video recording menu and choose [N-Log] as the tone mode. Choose N‑Log to preserve details in highlights and shadows and avoid over-saturated colors when recording videos. n will appear in the shooting display.
View Assist You may find that the preview in the shooting display during N-Log recording lacks contrast. Selecting [ON] for Custom Setting g10 [View assist] simplifies colors for enhanced contrast. p will appear in the shooting display. Colors in the actual recorded footage are unaffected. Contrast is also enhanced when N‑Log footage is viewed on the camera.
Viewing Pictures Viewing Pictures Full-Frame Playback Press the K button to view the most recent picture full frame in the display. Press 4 to return to the previous frame, 2 to skip to the next frame. Press 1, 3, or the DISP button to view more information on the current picture ( 0 202).
Thumbnail Playback To view multiple pictures, press the W (Q) button when a picture is displayed full frame. The number of pictures displayed increases from 4 to 9 to 72 each time the W (Q) button is pressed, and decreases with each press of the X button. Highlight pictures using 1, 3, 4, or 2.
D Touch Controls Touch controls can be used when pictures are displayed in the monitor ( 0 62).
Photo Information Photo information is superimposed on pictures displayed in full-frame playback. Press 1, 3, or the DISP button to cycle through photo information as shown below. 1 2 3 4 5 6 7 8 Basic information Exposure data * Highlight display * RGB histogram * Shooting data * Overview data * None (picture only) * File info * * Displayed only if the corresponding option is selected for [Playback display options] in the playback menu.
Basic Information 12 34 5 6 7 8 18 17 16 15 9 14 13 12 11 10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Voice memo indicator ( 0 278) Protect status ( 0 223) Retouch indicator ( 0 238) Upload marking ( 0 227) IPTC preset indicator ( 0 696) Focus point ( 0 123) 1 First picture in burst/total number of pictures in burst ( 0 658) 2 Frame number/total number of frames Image quality ( 0 110) Image size ( 0 112) Image area ( 0 108) HLG icon ( 0 386) Time of recording ( 0 673) Date of recording ( 0 673) C
Exposure Data 1 2 3 4 1 2 3 4 5 6 7 5 6 7 Current card slot Folder number–frame number ( 0 373) Shooting mode ( 0 131) Shutter speed ( 0 132, 0 135) Aperture ( 0 134, 0 135) Exposure compensation value ( 0 143) ISO sensitivity ( 0 152) * * Displayed in red if the picture was taken with auto ISO sensitivity control enabled. Highlight Display 1 1 Highlights (areas that may be overexposed) flash in the display.
RGB Histogram 2 3 4 5 1 1 2 3 4 5 White balance ( 0 157) Color temperature ( 0 166) Preset manual ( 0 170) White balance fine-tuning ( 0 162) 205 Histogram (RGB channel) Histogram (red channel) Histogram (green channel) Histogram (blue channel) Photo Information
D Playback Zoom To zoom in on the picture in the histogram display, press X. The histogram will be updated to show only the data for the portion of the picture visible in the display. Use the multi selector to scroll to areas of the frame not visible in the monitor. Press W (Q) to zoom out. D Histograms Histograms show tone distribution. Pixel brightness (tone) is plotted on the horizontal axis and the number of pixels on the vertical axis.
Shooting Data View the settings in effect at the time the picture was taken. The shooting data list has multiple pages, which can be viewed by pressing 1 or 3. The information displayed can be selected using [Playback display options] > [Detailed shooting data] in the playback menu.
Flash Data Displayed only if photo was taken with optional flash unit ( 0 354, 0 364). 1 2 3 4 1 2 3 Flash type Remote flash control Flash mode ( 0 359) 4 Flash control mode ( 0 358) Flash compensation ( 0 361) 2 3 Skin softening ( 0 406) Portrait impression balance ( 0 407) 2 Picture Control/HLG Data 1 2 3 1 Picture Control ( 0 176) 1 HLG Picture Control ( 0 394) 1 HLG quality ( 0 497) 1 The items displayed vary with the Picture Control in effect when the picture was taken.
Other Shooting Data 1 2 3 4 5 6 1 2 3 High ISO NR ( 0 402) Long-exposure noise reduction ( 0 401) Active D-Lighting ( 0 399) HDR strength ( 0 444) 4 5 6 Vignette control ( 0 403) History of retouches made using [Retouch] option in playback i menu ( 0 238). Changes are listed in the order applied. Image comment ( 0 693) Copyright Information Copyright information is only displayed if recorded using the [Copyright information] item in the setup menu at the time the picture was taken.
Location Data Location data must be downloaded from a smart device and are displayed only if embedded in the picture at the time it was taken. The items listed vary with the smart device from which the data were acquired. The location data recorded with videos are those reported at the start of recording. Note that the camera may be unable to download or display location data from smart devices depending on the version of the device operating system and/or SnapBridge app used.
IPTC Data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Caption Event ID Headline Object name City State Country 211 Category Supp. Cat.
Overview 1 2 3 13 12 11 10 4 9 1 2 3 4 5 6 7 8 7 8 9 10 11 12 13 Frame number/total number of frames Camera name Histogram ( 0 206) Image quality ( 0 110) Image size ( 0 112) Image area ( 0 108) HLG icon ( 0 386) 212 6 5 Time of recording ( 0 673) Date of recording ( 0 673) Current card slot Folder name ( 0 373) File name ( 0 377) Rating ( 0 225) Photo Information
1 2 3 4 5 6 7 8 9 10 11 12 13 20 19 14 18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Voice memo indicator ( 0 278) Protect status ( 0 223) Retouch indicator ( 0 238) Upload marking ( 0 227) IPTC preset indicator ( 0 696) Location data indicator Image comment indicator ( 0 693) Metering ( 0 411) Shooting mode ( 0 131) Shutter speed ( 0 132, 0 135) 19 20 17 16 15 Aperture ( 0 134, 0 135) ISO sensitivity ( 0 152) 1 Focal length Active D-Lighting ( 0 399) Picture Control ( 0 176) Color space ( 0 39
File Info 12 34 5 6 7 9 1 2 3 4 8 5 6 7 8 Voice memo indicator ( 0 278) Protect status ( 0 223) Retouch indicator ( 0 238) Upload marking ( 0 227) 9 IPTC preset indicator ( 0 696) Focus point ( 0 123) 1 Frame number/total number of frames First picture in burst/total number of pictures in burst ( 0 658) 2 Rating ( 0 225) 1 Displayed only if [Focus point] is selected for [Playback display options] in the playback menu.
The i Button (Playback Mode) Pressing the i button during playback zoom or full-frame or thumbnail playback displays the i menu for playback mode. Highlight items and press J or 2 to select. Press the i button again to return to playback. Photos Option Description [Quick crop] 1 Save a copy of the current picture cropped to the area visible in the display. This option is not available when RGB histograms are displayed ( 0 205).
Option [Select all for computer upload] [Select all for upload (FTP)] Description Mark for upload all pictures meeting the current filter criteria ( 0 229). These options are displayed only if the camera is connected to a computer or FTP server. Videos over 4 GB in size cannot be selected for upload. [Filtered playback] View only pictures that match selected criteria ( 0 229). [Filtered playback criteria] Choose filter criteria. [Record voice memo] Add a voice memo to the current picture ( 0 276).
2 Not available during playback zoom. 3 Available only when a retouched copy (indicated by a p icon) or the source picture for a retouched copy is selected.
Tip: “Side-by-Side Comparison” Choose [Side-by-side comparison] to compare retouched copies with the unretouched originals. 1 2 3 1 2 Options used to create copy 3 Retouched copy Source picture The source picture is displayed on the left, the retouched copy on the right. The options used to create the copy listed at the top of the display. Press 4 or 2 to switch between the source picture and the retouched copy.
Videos Option [Rating] [Select for upload to computer] [Select for upload (FTP)] [Select all for computer upload] [Select all for upload (FTP)] Description Rate the current picture ( 0 225). Select the current picture for upload ( 0 227). These options are displayed only if the camera is connected to a computer or FTP server. Mark for upload all pictures meeting the current filter criteria ( 0 229). These options are displayed only if the camera is connected to a computer or FTP server.
Videos (Playback Paused) Option Description 9 [Trim video] Trim unwanted footage ( 0 270). 4 [Save current frame] Save a selected frame as a JPEG still ( 0 273). 1 [Save consecutive frames] Save the frames in a selected length of footage as a series of individual JPEG images ( 0 274). [Volume control] Adjust playback volume.
Playback Zoom To zoom in on a photo displayed in full-frame playback, press X or J or give the display two quick taps. Large, medium, and small [FX (36×24)]-format photos can respectively be zoomed in to maximums of approximately 24×, 18×, and 12×. Faces detected during zoom are indicated by white borders; rotate the sub-command dial to view other faces. Using Playback Zoom Operation Description Press the X button or use stretch gestures to zoom in. To zoom out, press W (Q) or use pinch gestures.
Operation Description Faces detected during zoom are indicated by white borders in the Select faces View other pictures Protect pictures Exit to shooting mode View menus navigation window. Rotate the sub-command dial or tap the onscreen guide to view other faces. Rotate the main command dial to view the same location in other photos without changing the zoom ratio (selecting a video cancels zoom). You can also view other photos by tapping the e or f icon at the bottom of the display.
Protecting Pictures from Deletion Pictures can be protected to prevent their being deleted accidentally. Protected pictures will however be deleted when the memory card is formatted ( 0 671). 1 Select a picture. Display the picture in full-frame playback or playback zoom. Alternatively, you can highlight the picture in the thumbnail list using the multi selector. 2 Press the A (g) button. Protected pictures are marked with a P icon.
D Voice Memos Protecting photos also protects any voice memos recorded with the pictures. Voice memos cannot be protected separately. D Caution: Uploading Protected Pictures via FTP The copies on the FTP server will not be protected even if the originals are. Markings can be added using ratings.
Rating Pictures Rate pictures. 1 Select the desired picture with the multi selector and press 2 Highlight [Rating] and press 2. 3 Choose a rating. the i button. Rotate the main command dial to highlight the desired rating and press J to select. Choose from ratings of from zero to five stars, or select d to mark the picture as a candidate for later deletion.
Tip: Ratings Ratings can also be viewed in NX Studio. Tip: Rating Pictures Using Camera Controls If [Rating] has been assigned to a control using Custom Setting f3 [Custom controls (playback)], pictures can be rated by holding the control and rotating the main command dial.
Selecting Pictures for Upload Follow the steps below to select the current picture for upload to a smart device, computer, or FTP server. The i menu items used to select pictures for upload vary with the type of device connected: - [Select for upload to smart device]: Displayed when the camera is connected to a smart device using [Connect to smart device] in the network menu ( 0 725).
D Removing Upload Marking Repeat Steps 1–2 to remove upload marking from selected pictures.
Filtered Playback Select [Filtered playback] in the i menu to view only pictures that meet the criteria chosen for [Filtered playback criteria] in the playback menu or playback i menu. “Filtered Playback Criteria” Highlight options and press J to select (M) or deselect (U). During filtered playback, only pictures that meet all criteria marked with a check ( M) will be displayed. Option Description [Protect] M: Include protected pictures. [Picture type] M: Include pictures of the selected types.
During filtered playback, a white border appears around the display. To end filtered playback, select [Filtered playback] again.
Viewing Slide Shows To view a slide show in which pictures are played back one at a time in the order recorded, select [Slide show] in the i menu. You can also choose how long any photos in the show are displayed. 1 Select the starting picture using the multi selector and press the i button. The slide show starts with the selected picture and continues through all the pictures recorded after it. 2 Highlight [Slide show] and press 2.
During the Show The following operations can be performed while the show is in progress: Operation Skip back/skip ahead View additional photo info Description Press 4 to return to the previous frame, 2 to skip to the next frame. Press 1 or 3 to choose the photo info displayed. To hide photo info, select [None (picture only)]. Adjust volume Press X to increase volume, W (Q) to decrease. Exit to playback mode Press J to end the slide show and return to the playback display.
Deleting Pictures Follow the steps below to delete pictures from memory cards. Note that pictures cannot be recovered once deleted. Pictures that are protected, however, cannot be deleted. Using the Delete Button Press the O button to delete the current picture. 1 Select the desired picture with the multi selector and press the O button. A confirmation dialog will be displayed. To exit without deleting the picture, press K. 2 Press O again. The picture will be deleted.
Tip: Deleting Copies If the picture selected in the playback display when the O button is pressed was recorded with two memory cards inserted and an option other than [Overflow] selected for [Secondary slot function], you will be prompted to choose whether to delete both copies or only the copy on the card in the current slot ( 0 379).
Deleting Multiple Pictures Use [Delete] in the playback menu to delete multiple pictures at once. Note that depending on the number of pictures, some time may be required for deletion. Option Description Q [Selected pictures] Delete selected pictures. d [Candidates for deletion] Delete pictures rated d (candidate for deletion). [Pictures shot on selected dates] Delete all pictures taken on selected dates.
2 Delete the pictures. Press J; a confirmation dialog will be displayed. Highlight [Yes] and press J to delete the selected pictures. Candidates for Deletion 1 Select pictures. The camera will list all pictures rated d (candidate for deletion). Pictures you do not currently wish to delete can be deselected by highlighting them using the multi selector and pressing W (Q). To view the highlighted picture full screen, press and hold the X button. 2 Delete the pictures.
2 Delete the pictures. Press J; a confirmation dialog will be displayed. Highlight [Yes] and press J to delete all the pictures taken on the selected dates. Deleting All Pictures 1 Choose a memory card. Press 1 or 3 to highlight the slot containing the memory card from which the pictures will be deleted and press J. 2 Delete the pictures. A confirmation dialog will be displayed showing the name of the folder containing the photos to be deleted.
Retouching Photographs Retouching Photographs Retouched copies can be created from existing pictures. Retouched copies are saved to new files, separate from the original pictures. Option Description [RAW processing (current picture)] Save a copy of the current NEF (RAW) picture in another format such as JPEG ( 0 241). [RAW processing (multiple pictures)] Select multiple existing NEF (RAW) pictures for conversion to JPEG or other formats ( 0 241).
Option [Overlay (add)] Description Overlay two pictures to create a new picture in JPEG format ( 0 262). Compare the pixels at each point in multiple pictures and [Lighten] select the brightest to create a new picture in JPEG format ( 0 264). Compare the pixels at each point in multiple pictures and [Darken] [Motion blend] 1 select the darkest to create a new picture in JPEG format ( 0 264).
D Cautions: Retouch The camera may not be able to display or retouch images that were taken or retouched using other cameras or that have been retouched on a computer. If no actions are performed for a brief period, the display will turn off and any unsaved changes will be lost. To increase the time the display remains on, choose a longer menu display time using Custom Setting c3 [Power off delay] > [Menus].
RAW Processing RAW processing is used to save NEF (RAW) pictures in other formats, such as JPEG. Depending on the tone mode selected when the picture was taken, copies can be saved in either JPEG or HEIF format. D Caution: RAW Processing RAW processing is available only with NEF (RAW) images created with this camera. Pictures in other formats and NEF (RAW) photos taken with other cameras or NX Tether cannot be selected.
3 Choose a destination. Press 1 or 3 to highlight a card slot and press J. You will not be prompted to select the slot if only one memory card is inserted. 4 Choose settings for the JPEG copy in the [RAW processing] display.
Processing Multiple Pictures 1 Display an NEF (RAW) picture shot with [SDR] selected for 2 Select [Retouch] in the i menu, then highlight [RAW 3 Choose how pictures will be selected and where the copies will be saved. tone mode and then press the i button. processing (multiple pictures)] and press 2. Option Description [Select picture(s)] Create JPEG copies of selected NEF (RAW) pictures. Multiple NEF (RAW) pictures can be selected.
4 Select the source slot. Highlight the slot with the card containing the NEF (RAW) images and press 2. You will not be prompted to select the slot if only one memory card is inserted. 5 Select photographs. If you chose [Select picture(s)]: Highlight pictures using the multi selector. To view the highlighted picture full screen, press and hold the X button. To select the highlighted picture, press the W (Q) button. Selected pictures are marked with a check ( ).
6 Choose settings for the JPEG copies in the [RAW processing] display.
Processing Photos Shot Using the “HLG” Tone Mode Applying RAW processing to photos shot with [HLG] selected for tone mode creates HEIF copies. NEF (RAW) pictures taken with [HLG] selected for tone mode can also be saved in JPEG format ( 0 248). Note, however, that the JPEG copies may exhibit more “noise” in the form of randomlyspaced bright pixels, fog, or lines than do JPEG copies created from NEF (RAW) pictures taken with [SDR] selected for tone mode.
4 Choose settings for the HEIF copy in the [RAW processing (HEIF)] display. The following settings can be adjusted: - Image quality ( 0 110) - Image size ( 0 112) - Exposure compensation ( 0 143) - White balance ( 0 157) - Picture Control (HLG; 0 394) - High ISO NR ( 0 402) - Vignette control ( 0 403) - Diffraction compensation ( 0 404) - Portrait impression balance ( 0 407) - To RAW processing (JPEG) The settings in effect when the photograph was taken will in some cases appear below the preview.
Tip: Creating JPEG Copies from RAW Photos Shot Using the HLG Tone Mode Selecting [To RAW processing (JPEG)] in Step 4 displays the [RAW processing (JPEG)] dialog, where you can adjust settings for saving the copy in JPEG format. To save the JPEG copy, highlight [EXE (save in JPEG format)] and press J. Exposure for JPEG copies created by applying [RAW processing (JPEG)] to RAW photos shot in HLG will be around 2 EV lower than that of JPEG copies created from RAW photos shot with [SDR] selected for tone mode.
Processing Multiple Pictures 1 Display an NEF (RAW) picture shot with [HLG] selected for tone mode and then press the i button. Choose a picture marked with the HLG icon. 2 3 Select [Retouch] in the i menu, then highlight [RAW processing (multiple pictures)] and press 2. Choose how pictures will be selected and where the copies will be saved. Option Description [Select picture(s)] Create HEIF copies of selected NEF (RAW) pictures. Multiple NEF (RAW) pictures can be selected.
4 Select the source slot. Highlight the slot with the card containing the NEF (RAW) images and press 2. You will not be prompted to select the slot if only one memory card is inserted. 5 Select photographs. If you chose [Select picture(s)]: Highlight pictures using the multi selector. To view the highlighted picture full screen, press and hold the X button. To select the highlighted picture, press the W (Q) button. Selected pictures are marked with a check ( ).
6 Choose settings for the HEIF copies in the [RAW processing (HEIF)] display. The following settings can be adjusted: - Image quality ( 0 110) - Image size ( 0 112) - Exposure compensation ( 0 143) - White balance ( 0 157) - Picture Control (HLG; 0 394) - High ISO NR ( 0 402) - Vignette control ( 0 403) - Diffraction compensation ( 0 404) - Portrait impression balance ( 0 407) - To RAW processing (JPEG) To use the setting in effect when the photographs were taken, if applicable, select [Original].
Tip: Creating JPEG Copies from RAW Photos Shot Using the HLG Tone Mode Selecting [To RAW processing (JPEG)] in Step 6 displays the [RAW processing (JPEG)] dialog, where you can adjust settings for saving the copies in JPEG format. To save the JPEG copies, highlight [EXE (save in JPEG format)] and press J.
Trim Create a cropped copy of the current photograph. The photograph is displayed with the selected crop shown in yellow; create a cropped copy as described below. Operation Description Size the crop Press X or W (Q) to choose the crop size. Change the crop aspect ratio Rotate the main command dial to choose the crop aspect ratio. Position the crop Use the multi selector to position the crop. Save the crop Press J to save the current crop as a separate file.
Resize Create small copies of selected photographs. Use [Resize (current picture)] to resize the current picture, or [Resize (multiple pictures)] to resize multiple pictures. D Caution: Resize Depending on the copy size, playback zoom may not be available when resized copies are displayed. D Resizing Cropped Pictures Pictures cropped to aspect ratios of 4 : 3 or 3 : 4 cannot be resized. Resizing the Current Picture 1 Select [Retouch] in the i menu, then highlight [Resize (current picture)] and press 2.
Resizing Multiple Pictures 1 Select [Retouch] in the i menu, then highlight [Resize 2 Choose a size. (multiple pictures)] and press 2. Highlight [Choose size] and press 2. Highlight the desired size (length in pixels) using 1 and 3 and press J. 3 Choose how pictures are selected. Option Description [Select picture(s)] Resize selected pictures. Multiple pictures can be selected. [Select date] Resize all pictures taken on selected dates. [Select folder] Resize all pictures in a selected folder.
4 Select the source slot. Highlight the slot with the card containing the desired pictures and press 2. You will not be prompted to select the slot if only one memory card is inserted. 5 Choose pictures. If you chose [Select picture(s)]: Highlight pictures using the multi selector. To view the highlighted picture full screen, press and hold the X button. To select the highlighted picture, press the W (Q) button. Selected pictures are marked with a check ( ).
D-Lighting D-Lighting brightens shadows. It is ideal for dark or backlit photographs. Before After The effect can be previewed in the edit display. To view the unedited picture, press and hold the DISP button. Press 1 or 3 to choose the amount of correction performed. The effect can be previewed in the edit display. Press J to save the retouched copy.
Straighten Rotate pictures by up to ±5° in increments of approximately 0.25°. The effect can be previewed in the edit display. To view the unedited picture, press and hold the DISP button. The greater the rotation, the more will be trimmed from the edges. Press 1 or 3 to choose the amount of straightening performed. Press J to save the retouched copy.
Distortion Control Create copies with reduced peripheral distortion, reducing barrel distortion in pictures taken with wide-angle lenses or pincushion distortion in pictures taken with telephoto lenses. If the camera detects distortion, it will offer a choice of [Auto] and [Manual]. Select [Auto] to let the camera correct distortion automatically. If the camera is unable to detect distortion, the only option available will be [Manual]. Select [Manual] to reduce distortion manually.
Perspective Control Create copies that reduce the horizontal and vertical effects of perspective in photos taken looking up from the base of a tall object. The effect can be previewed in the edit display. To view the unedited picture, press and hold the DISP button. Note that greater amounts of perspective control result in more of the edges being cropped out. For horizontal correction, highlight J and press 2. Press 1 to stretch the left edge, 3 to stretch the right.
Monochrome Copy photographs in a selected monochrome tint. Option Description [Black-and-white] Copy photographs in black-and-white. [Sepia] Copy photographs in sepia. [Cyanotype] Copy photographs in blue-and-white monochrome. The effect can be previewed in the edit display. To view the unedited picture, press and hold the DISP button. Highlighting [Sepia] or [Cyanotype] and pressing 2 displays saturation options for the selected monochrome tint; choose from [High], [Normal], and [Low].
Overlay (Add) Combine two existing photographs to create a single picture that is saved separately from the originals. 1 Select [Retouch] in the i menu, then highlight [Overlay 2 Select photographs. (add)] and press 2. Highlight pictures using the multi selector. To view the highlighted picture full screen, press and hold the X button. To select the highlighted picture, press the W (Q) button. Selected pictures are marked with a check ( ).
4 Save the overlay. Press J to save the overlay. D Cautions: “Overlay (Add)” Colors and brightness in the preview may differ from the final picture. Only pictures created with this camera can be selected. Pictures created with other models cannot be selected. The overlay will be the same size as the smallest of the two component pictures.
“Lighten” and “Darken” The camera compares multiple selected pictures and selects only the brightest or darkest pixels at each point in the picture to create a single new JPEG copy. 1 Select [Retouch] in the i menu, then highlight [Lighten] or [Darken] and press 2. [Lighten]: The camera compares the pixels in each picture and uses only the brightest. [Darken]: The camera compares the pixels in each picture and uses only the darkest. 2 Choose how pictures are selected.
4 Select the pictures. If you chose [Select individual pictures]: Highlight pictures using the multi selector. To view the highlighted picture full screen, press and hold the X button. To select the highlighted picture, press the W (Q) button. Selected pictures are marked with a check ( ). To remove the check ( ) and deselect the current picture, press the W (Q) button again. The selected pictures will be combined using the option selected in Step 1. Press J to proceed once selection is complete.
D Cautions: “Lighten” and “Darken” Only pictures created with this camera can be selected. Pictures created with other models cannot be selected. The overlay will include only pictures created with the same options selected for [Image area] > [Choose image area] in the photo shooting menu. The image quality setting for the completed overlay is that of the highest quality picture it contains. Overlays that include NEF (RAW) pictures will be saved at an image quality of [JPEG/HEIF finem].
Motion Blend The camera examines a selected burst of pictures to detect moving subjects and overlays them to create a single JPEG image. 1 Select [Retouch] in the i menu, then highlight [Motion blend] and press 2. 2 Select the source slot. Highlight the slot with the card containing the desired pictures and press 2. You will not be prompted to select the slot if only one memory card is inserted. 3 Select the pictures. Highlight pictures using the multi selector.
5 Save the overlay. Highlight [Yes] in the confirmation dialog and press J to save the overlay. D Cautions: “Motion Blend” The final picture may differ from the preview both in how it looks (including color and brightness) and in how the pictures are combined. Only pictures created with this camera can be selected. Pictures created with other models cannot be selected. [Motion blend] is intended for bursts shot with the camera on a tripod, with a fixed background and moving subjects.
Editing Videos Editing Videos Videos can be edited using the following options: Option Description 9 [Trim video] Trim unwanted footage. 4 [Save current frame] Save a selected frame as a JPEG still. 1 [Save consecutive frames] Save the frames in a selected length of footage as a series of individual JPEG images. [Volume control] Volume can also be adjusted while playback is paused. These options are available only with videos recorded with [H.265 8-bit (MOV)] or [H.
Trimming Videos Trim unwanted footage. 1 Display a video full frame. 2 Pause the video on the new opening frame. Press J to start playback. Press 3 to pause. Your approximate position in the video can be ascertained from the video progress bar. Press 4 or 2 or rotate the command dials to locate the desired frame. 3 Press the i button, highlight [Trim video], and press 2.
4 Choose the start point. To create a copy that begins from the current frame, highlight [Start point] and press J. 5 Confirm the new start point. If the desired frame is not currently displayed, press 4 or 2 to advance or rewind a frame at a time. Rotate the main command dial one stop to skip ahead or back 10 frames. Rotate the sub-command dial one stop to skip ahead or back 10 s. 6 Choose the end point.
8 Preview the copy. To preview the copy, highlight [Preview] and press J (to interrupt the preview and return to the save options menu, press 1). To abandon the current copy and return to Step 5, highlight [Cancel] and press J. 9 Choose a save option. Choose [Save as new file] to save the edited copy as a new file. To replace the original video with the edited copy, choose [Overwrite existing file]. 10 Save the copy. Press J to save the copy.
Saving the Current Frame as a JPEG Still Stills can be created from individual frames of existing videos. You can create a single still from the current frame or a series of stills from a selected length of footage. 1 Pause the video on the desired frame. Press 3 to pause playback. Your approximate position in the video can be ascertained from the video progress bar. Press 4 or 2 or rotate the command dials to locate the desired frame. 2 Press the i button and highlight [Save current frame].
Creating Stills from a Selected Length of Footage The frames in a selected length of footage can be saved as a series of individual JPEG images. 1 Pause the video on the desired frame. Press 3 to pause playback. Your approximate position in the video can be ascertained from the video progress bar. Press 4 or 2 or rotate the command dials to locate the desired frame. 2 Press the i button, highlight [Save consecutive frames] and press 2. 3 Choose a destination. Choose the destination.
5 Press J. The selected footage will be saved as a series of JPEG stills. The number varies with the video frame rate. D “Save Consecutive Frames” Stills are saved at the dimensions selected for [Frame size/frame rate] in the video recording menu when the video was recorded. They cannot be retouched.
Voice Memos Recording Voice Memos Voice memos up to 60 seconds long can be added to photographs. 1 Select the photograph. Only one voice memo can be recorded per picture; additional voice memos cannot be recorded for pictures already marked with a h icon. The existing voice memo must be deleted before another can be recorded ( 0 279). 2 Select [Record voice memo] in the i menu. To start recording, press the i button, highlight [Record voice memo], and press J.
D Recording Not Available Voice memos cannot be added to videos or Image Dust Off reference data. D Recording Restrictions Voice memos cannot be recorded if: the photo/video selector is rotated to 1 or a multiple exposure is in progress. D Caution: Recording Voice Memos Touch controls are disabled and other pictures cannot be displayed while recording is in progress. D Interrupting Recording Pressing the shutter-release button or operating other camera controls may end recording.
Playing Voice Memos To play voice memos when viewing photographs marked with h icons, press the i button, highlight [Play voice memo], and press J. D Interrupting Playback Pressing the shutter-release button or operating other camera controls may end playback. Playback ends automatically when another picture is selected or the camera is turned off.
Deleting Voice Memos To delete the voice memo from the current photo, press the O button; a confirmation dialog will be displayed as shown. To delete both the photo and the voice memo, highlight [Picture and voice memo] and press O. To delete only the voice memo, highlight [Voice memo only] and press O. To exit without deleting either the photo or the voice memo, press D.
Connecting to HDMI TVs and Recorders Connecting to HDMI Devices The camera can be connected to TVs, recorders, and other devices featuring HDMI connectors. Use a third-party Type D HDMI cable. The cable must be purchased separately. Always turn the camera off before connecting or disconnecting a cable. 1 2 1 2 HDMI connector for connection to camera HDMI connector for connection to external device * * Choose a cable with a connector that matches the connector on the HDMI device.
TVs After tuning the TV to the HDMI input channel, turn the camera on and press the K button to view pictures on the television screen. Audio playback volume can be adjusted using the controls on the TV. Camera controls cannot be used. If the camera is paired with a smart device running the SnapBridge app, the device can be used to control playback remotely while the camera is connected to a TV. See SnapBridge online help for details.
Recorders In video mode, the camera can record directly to connected HDMI recorders. If a memory card is inserted in the camera when it is connected to a recorder, video will be recorded both to the recorder and the memory card. If no memory card is inserted, the footage will be recorded only to the external device.
Adjusting Settings Use the [HDMI] item in the setup menu to adjust settings for HDMI output. Option Description [Output resolution] The format for output to HDMI devices can be selected from [Auto], [2160p (progressive)], [1080p (progressive)], [1080i (interlaced)], * and [720p (progressive)]. [Output range] The RGB video signal input range varies with the HDMI device. [Auto], which matches the output range to the HDMI device, is recommended in most situations.
“Output Resolution” When [Auto] is selected for [HDMI] > [Output resolution] in the setup menu, the camera automatically detects whether the external recorder supports the frame size and rate selected on the camera. If it does not, the camera will search for a supported resolution and frame rate in the order listed below. If no supported resolution and frame rate is found, output will be suspended.
D Frame Rates for “Output Resolution” Options Other Than “Auto” Video recording rates of 120p, 100p, 60p, or 50p will be adjusted as follows if not compatible with the frame rate chosen for the external recorder. 120p: The frame rate will first drop to 60p. If 60p is also not supported, it will drop to 30p. 100p: The frame rate will first drop to 50p. If 50p is also not supported, it will drop to 25p. 60p: The frame rate will drop to 30p. 50p: The frame rate will drop to 25p.
YCbCr and Bit Depth The YCbCr value and bit depth for footage output to external HDMI devices varies with the options selected for [Video file type] and [Frame size/frame rate] in the video recording menu. Video file type H.265 10-bit (MOV) Frame size/frame rate 3840×2160 60p/50p/30p/ 25p/24p YCbCr and bit depth 4 : 2 : 2 10-bit 1920×1080 H.265 8-bit (MOV) 3840×2160 60p/50p/30p/ 25p/24p 4 : 2 : 2 8-bit 1920×1080 H.
HDMI Output and Tone Mode The tone mode selected via [Video file type] in the video recording menu applies to video output via HDMI. Equipment that supports HDR (HLG) is required when [HLG] is selected. External Recording Control Choosing [ON] for [External rec. cntrl (HDMI)] in the video recording menu allows camera controls to be used to start and stop recording on the external recorder. For information on whether your recorder supports external recording control, consult the manufacturer.
Connecting to Smart Devices The SnapBridge App Use the SnapBridge app for wireless connections between the camera and your smartphone or tablet (“smart device”). The SnapBridge app can be downloaded from the Apple App Store® or on Google Play™. Visit the Nikon website for the latest SnapBridge news. Carefully read any license agreements or the like displayed when SnapBridge is launched and only proceed if you are willing to accept them.
What SnapBridge Can Do for You The tasks that can be performed using the SnapBridge app are outlined below. For details, see the SnapBridge app online help: https://nikonimglib.com/snbr/onlinehelp/en/index.html Downloading Pictures from the Camera Download existing pictures to your smart device. They can also be downloaded automatically as they are taken. Remote Photography Control the camera and take pictures from the smart device.
Wireless Connections Use the SnapBridge app for wireless connections between the camera and your smart device. You can connect via either Bluetooth ( 0 290) or Wi-Fi ( 0 294). Connecting using Bluetooth allows pictures to be uploaded automatically as they are taken. Connecting via Bluetooth (Pairing) Before connecting via Bluetooth for the first time, you will need to pair the camera and smart device. D Before Pairing Enable Bluetooth on the smart device.
Pairing Pair the camera and smart device as described below. Some operations are performed using the camera, others on the smart device. Additional instructions are available via SnapBridge online help. 1 Camera: Select [Connect to smart device] > [Pairing (Bluetooth)] in the network menu, then highlight [Start pairing] and press J. The camera name will be displayed in the monitor. 2 Smart device: Launch the SnapBridge app and tap [Connect to camera] in the tab.
4 Camera/smart device: After confirming that the camera and smart device display the same authentication code, follow the on-screen instructions on both devices to complete pairing. Tap the pairing button on the smart device and press the J button on the camera. The camera and smart device will each display a message when pairing is complete. The camera will then automatically exit to the menus. The camera and smart device are now paired. For information on using the SnapBridge app, see online help.
D Pairing Error If you wait too long between pressing the button on the camera and tapping the button on the smart device in Step 4, the device will display an error message and pairing will fail. If you are using an Android device, tap [OK] and return to Step 1. If you are using an iOS device, dismiss the SnapBridge app and check that it is not running in the background, then request iOS to “forget” the camera before returning to Step 1.
Connecting via Wi-Fi (Wi-Fi Mode) In Wi-Fi mode, the camera connects directly to the smart device via Wi-Fi, no Bluetooth pairing required. D Before Connecting (Wi-Fi Mode) Enable Wi-Fi on the smart device. For details, see the documentation provided with the device. Ensure that the batteries in the camera and smart device are fully charged to prevent the devices turning off unexpectedly. Check that there is space available on the camera memory card.
3 Camera: Select [Connect to smart device] > [Wi-Fi connection] in the network menu, then highlight [Establish Wi-Fi connection] and press J. The camera SSID and password will be displayed. 4 Smart device: Follow the on-screen instructions to establish a Wi-Fi connection. On iOS devices, the “Settings” app will launch. Tap [< Settings] to open [Settings], then scroll up and tap [Wi‑Fi] (which you’ll find near the top of the settings list) to display Wi-Fi settings.
The camera and smart device are now connected via Wi-Fi. For information on using the SnapBridge app, see online help. D Terminating Wi-Fi Mode To end the Wi-Fi connection, tap and select [Exit Wi-Fi mode.]. in the SnapBridge 296 tab.
Connecting to Computers or FTP Servers Making the Connection The camera can be connected to a computer or FTP server using any of the methods below. Computers: Connecting via USB Install Nikon’s NX Studio software on your computer to download pictures from cameras connected via USB ( 0 298). Type-C You can also control the camera using NX Tether software. Computers: Connecting via Wireless LAN Connect to computers using the camera’s built-in wireless LAN ( 0 302).
Computers: Connecting via USB Connect the camera using the supplied USB cable. You can then use NX Studio software to copy pictures to the computer for viewing and editing. Installing NX Studio You will need an Internet connection when installing NX Studio. Visit the Nikon website for the latest information, including system requirements. Download the latest NX Studio installer from the website below and follow the on-screen instructions to complete installation. https://downloadcenter.nikonimglib.
Copying Pictures to a Computer Using NX Studio See online help for detailed instructions. 1 Connect the camera to the computer. After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown. Tip: Using a Card Reader Pictures can also be copied from memory cards inserted in third-party card readers connected to the computer. You should however check that the card is compatible with the card reader. 2 Turn the camera on.
3 Click [Start Transfer]. Pictures on the memory card will be copied to the computer. 4 Turn the camera off. Disconnect the USB cable when transfer is complete.
D Windows Some computers may be configured to display an AutoPlay prompt when the camera is connected. Click the dialog and then click [Nikon Transfer 2] to select Nikon Transfer 2. D macOS If Nikon Transfer 2 does not start automatically, confirm that the camera is connected and then launch Image Capture (an application that comes with macOS) and select Nikon Transfer 2 as the application that opens when the camera is detected.
Computers: Connecting via Wireless LAN The camera can connect to computers via Wi-Fi (built-in wireless LAN). D Connecting to Multiple Devices The camera can connect to only one type of device (computer, FTP server, or smart device) at a time. End the current connection before attempting to connect to a device of a different type. D Can’t Connect? If you have trouble connecting, try: turning the camera off and then on again, checking wireless settings on the computer, or restarting the computer.
Connecting to Computers via Wireless LAN The camera can connect to computers either by direct wireless link (access-point mode) or via a wireless router on an existing network, including home networks (infrastructure mode). Direct Wireless Connection (Access-Point Mode) The camera and computer connect via direct wireless link.
3 Name the new profile. To proceed to the next step without changing the default name, press X. Whatever name you choose will appear in the network menu [Connect to computer] > [Network settings] list. To rename the profile, press J. For information on text entry, see “Text Entry” ( 0 74). Press X to proceed after entering a name. 4 Highlight [Direct connection to computer] and press J. The camera SSID and encryption key will be displayed.
5 Establish a connection to the camera. Windows: Click the wireless LAN icon in the taskbar. Select the SSID displayed by the camera in Step 4. When prompted to enter the network security key, enter the encryption key displayed by the camera in Step 4. The computer will initiate a connection to the camera. macOS: Click the wireless LAN icon in the menu bar. Select the SSID displayed by the camera in Step 4.
8 In the Wireless Transmitter Utility, enter the authentication code displayed by the camera. The camera will display an authentication code. Enter the authentication code in the dialog displayed by the Wireless Transmitter Utility and click [Next]. 9 Complete the pairing process. When the camera displays a message stating that pairing is complete, press J. In the Wireless Transmitter Utility, click [Next]; you will be prompted to choose a destination folder.
10 Check the connection. When a connection is established, the profile name will be displayed in green in the camera [Connect to computer] menu. If the profile name is not displayed in green, connect to the camera via the wireless network list on your computer. A wireless connection has now been established between the camera and the computer.
Connecting in Infrastructure Mode The camera connects to a computer on an existing network (including home networks) via a wireless router. The computer can still connect to the Internet while connected to the camera. Before proceeding, check that the Wireless Transmitter Utility ( 0 302) is installed on the computer. D Infrastructure Mode Connection to computers beyond the local area network is not supported. You can connect only to computers on the same network.
4 Highlight [Search for Wi-Fi network] and press J. The camera will search for networks currently active in the vicinity and list them by name (SSID). D “Easy Connect” To connect without entering an SSID or encryption key, press X in Step 4. Next, press J and choose from the options below. After connecting, proceed to Step 7. Option [Push-button WPS] [PIN-entry WPS] Description For routers that support push-button WPS. Press the WPS button on the router and then press the camera J button to connect.
5 Choose a network. Highlight a network SSID and press J. The band on which each SSID operates is indicated by an icon. Encrypted networks are indicated by a h icon. If the selected network is encrypted (h), you will be prompted to enter the encryption key. If the network is not encrypted, proceed to Step 7. If the desired network is not displayed, press X to search again. D Hidden SSIDs Networks with hidden SSIDs are indicated by blank entries in the network list.
6 Enter the encryption key. Press J and enter the encryption key for the wireless router. For more information, see the documentation for the wireless router. Press X when entry is complete. Press X again to initiate the connection. A message will be displayed for a few seconds when the connection is established.
7 Obtain or select an IP address. Highlight one of the following options and press J. Option Description Select this option if the network is configured to supply the IP [Obtain automatically] address automatically. A “configuration complete” message will be displayed once an IP address has been assigned. Enter the IP address and sub-net mask manually. Press J; you will be prompted to enter the IP address. Rotate the main command dial to highlight segments.
10 Select the camera in the Wireless Transmitter Utility. Select the name displayed by the camera in Step 9 and click [Next]. 11 In the Wireless Transmitter Utility, enter the authentication code displayed by the camera. The camera will display an authentication code. Enter the authentication code in the dialog displayed by the Wireless Transmitter Utility and click [Next].
12 Complete the pairing process. When the camera displays a message stating that pairing is complete, press J. In the Wireless Transmitter Utility, click [Next]; you will be prompted to choose a destination folder. For more information, see online help for the Wireless Transmitter Utility. A wireless connection will be established between the camera and computer when pairing is complete. 13 Check the connection.
Ending the Connection to the Computer You can end the connection by: turning the camera off, or selecting [End current connection] for [Connect to computer] > [Network settings] in the network menu. D Access-Point Mode An error will occur if the computer’s wireless connection is disabled before the camera’s. Disable camera’s connection first.
FTP Servers: Connecting via Wireless LAN The camera can connect to FTP servers via Wi-Fi (built-in wireless LAN). D Connecting to Multiple Devices The camera can connect to only one type of device (computer, FTP server, or smart device) at a time. End the current connection before attempting to connect to a device of a different type. D Can’t Connect? If you have trouble connecting, try: turning the camera off and then on again, checking wireless settings on the FTP server, or restarting the FTP server.
Connecting to FTP Servers via Wireless LAN The camera can connect to FTP servers either by direct wireless link (access-point mode) or via a wireless router on an existing network, including home networks (infrastructure mode). D FTP Servers Servers can be configured using standard FTP services—including IIS (Internet Information Services) —available with Windows 11 and Windows 10. Internet FTP connections and connection to FTP servers running third-party software are not supported.
2 Highlight [Create profile] and press J. 3 Highlight [Connection wizard] and press 2. The connection wizard will launch. D Manual Configuration Choose [Configure manually] to configure settings manually. 4 Name the new profile. To proceed to the next step without changing the default name, press X. Whatever name you choose will appear in the network menu [Connect to FTP server] > [Network settings] list. To rename the profile, press J. For information on text entry, see “Text Entry” ( 0 74).
5 Highlight [Direct connection to computer] and press J. The camera SSID and encryption key will be displayed. 6 Establish a connection to the camera. Windows: Click the wireless LAN icon in the taskbar. Select the SSID displayed by the camera in Step 5. When prompted to enter the network security key, enter the encryption key displayed by the camera in Step 5. The computer will initiate a connection to the camera. macOS: Click the wireless LAN icon in the menu bar.
7 Choose the server type. Highlight [FTP], [SFTP] (SSH FTP), or [FTPS] (FTP-SSL) and press J to display a dialog where you can choose a login method. 8 Log in. Highlight one of the following options and press J. Option [Anonymous login] [Enter user ID] Description Select this option if the server does not require a user ID or password. This option can only be used with servers that are configured for anonymous login. If login is successful, the camera will prompt you to choose a destination.
9 Choose a destination folder. Highlight one of the following options and press J. Option [Home folder] Description Select this option to select the server’s home folder as the destination for pictures uploaded from the camera. A “setup complete” dialog will be displayed if the operation is successful. [Enter folder name] Enter the destination folder name manually. The folder must already exist on the server.
Connecting in Infrastructure Mode The camera connects to an FTP server on an existing network (including home networks) via a wireless router. FTP Tip: Infrastructure Mode Infrastructure mode supports connection to FTP servers on different networks. 1 Select [Connect to FTP server] in the network menu, then highlight [Network settings] and press 2. 2 Highlight [Create profile] and press J.
3 Highlight [Connection wizard] and press 2. The connection wizard will launch. D Manual Configuration Choose [Configure manually] to configure settings manually. 4 Name the new profile. To proceed to the next step without changing the default name, press X. Whatever name you choose will appear in the network menu [Connect to FTP server] > [Network settings] list. To rename the profile, press J. For information on text entry, see “Text Entry” ( 0 74). Press X to proceed after entering a name.
5 Highlight [Search for Wi-Fi network] and press J. The camera will search for networks currently active in the vicinity and list them by name (SSID). D “Easy Connect” To connect without entering an SSID or encryption key, press X in Step 5. Next, press J and choose from the options below. After connecting, proceed to Step 8. Option [Push-button WPS] [PIN-entry WPS] Description For routers that support push-button WPS. Press the WPS button on the router and then press the camera J button to connect.
6 Choose a network. Highlight a network SSID and press J. The band on which each SSID operates is indicated by an icon. Encrypted networks are indicated by a h icon. If the selected network is encrypted (h), you will be prompted to enter the encryption key. If the network is not encrypted, proceed to Step 8. If the desired network is not displayed, press X to search again. D Hidden SSIDs Networks with hidden SSIDs are indicated by blank entries in the network list.
7 Enter the encryption key. Press J and enter the encryption key for the wireless router. For more information, see the documentation for the wireless router. Press X when entry is complete. Press X again to initiate the connection. A message will be displayed for a few seconds when the connection is established.
8 Obtain or select an IP address. Highlight one of the following options and press J. Option Description Select this option if the network is configured to supply the IP [Obtain automatically] address automatically. A “configuration complete” message will be displayed once an IP address has been assigned. Enter the IP address and sub-net mask manually. Press J; you will be prompted to enter the IP address. Rotate the main command dial to highlight segments.
11 Enter the server address. Press J to enter the server URL or IP address. Press X when entry is complete. Press X again to connect to the FTP server. You will be prompted to choose a login method.
12 Log in. Highlight one of the following options and press J. Option [Anonymous login] Description Select this option if the server does not require a user ID or password. This option can only be used with servers that are configured for anonymous login. If login is successful, the camera will prompt you to choose a destination. Enter a user ID and password. Press J to log in when entry is [Enter user ID] complete. If login is successful, the camera will prompt you to choose a destination.
13 Choose a destination folder. Highlight one of the following options and press J. Option [Home folder] Description Select this option to select the server’s home folder as the destination for pictures uploaded from the camera. A “setup complete” dialog will be displayed if the operation is successful. [Enter folder name] Enter the destination folder name manually. The folder must already exist on the server.
Ending the Connection to the FTP Server You can end the connection by: turning the camera off, or selecting [End current connection] for [Connect to FTP server] > [Network settings] in the network menu. D Access-Point Mode An error will occur if the FTP server’s wireless connection is disabled before the camera’s. Disable camera’s connection first.
What You Can Do When the Camera Is Connected to a Computer or FTP Server Wireless LAN connections can be used to upload pictures or control the camera remotely. Uploading Pictures Pictures can be selected for upload during playback. They can also be uploaded automatically as they are taken. Before uploading pictures, connect the camera to the destination via wireless LAN ( 0 302, 0 316).
Selecting Pictures for Upload 1 Press the K button on the camera and select full-frame or thumbnail playback. 2 Select a picture and press the i button. The i menu items used to select pictures for upload vary with the type of device connected. 3 Highlight [Select for upload to computer] or [Select for upload (FTP)] and press J. A white “priority upload” icon will appear on the picture. If the camera is currently connected to a network, upload will begin immediately and the icon will turn green.
Uploading Photos as They Are Taken To upload new photos as they are taken, select [Connect to computer] or [Connect to FTP server] in the network menu and choose [ON] for [Options] > [Auto upload]. Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera. Videos are not uploaded automatically. They must instead be uploaded manually from the playback display. The Upload Icon Upload status is indicated by the upload icon.
The “Connect to Computer”/“Connect to FTP Server” Upload Status Display The [Connect to computer] and [Connect to FTP server] displays show the following: 1 4 1 2 3 4 3 2 Status: The status of the connection to the host. The profile name is displayed in green when a connection is established. While files are being transferred, the status display shows “Now uploading” preceded by the name of the file being sent. Errors are also displayed here.
D Loss of Signal Wireless transmission may be interrupted if the signal is lost. Upload of pictures with upload marking can be resumed by turning the camera off and then on again once the signal has been re-established. D Caution: During Upload Do not remove the memory card during upload. D Voice Memos Voice memos will be included when the associated pictures are transmitted. They cannot, however, be uploaded separately.
Camera Control The camera can be controlled from a computer running NX Tether software. Photos can be saved directly to the computer instead of to the memory card and can consequently be taken even when no memory card is inserted in the camera. Note that the camera standby timer does not expire in camera control mode. Before using NX Tether, connect the camera and computer via wireless LAN ( 0 302).
The “Connect to Computer” Camera Control Display The [Connect to computer] display shows the following: 1 3 2 1 2 3 Status: The status of the connection to the host. The profile name is displayed in green when a connection is established. Errors are also displayed here ( 0 339). Signal strength: The wireless signal strength. Band: The band used by the wireless network to which the camera is connected in infrastructure mode.
Troubleshooting Wireless LAN Connections Refer to this section for information on errors involving wireless LAN connections. For information on the Wireless Transmitter Utility, see the utility’s online help. Problems and Solutions Solutions to some common issues are listed below. Problem The camera displays a wireless error. The camera displays a TCP/IP error. Solution Connection settings require adjustment.
Error Codes The following messages and error codes may be displayed if an error occurs while the camera is connected to an FTP server via wireless LAN. ● [Wireless Error.] Error code Solution Confirm that the device to which you are attempting to connect is on. Err.11 Check the SSID ( 0 736). Confirm that you are using the correct password for the selected SSID. Err.12 Confirm that you are using the correct authentication method ( 0 736).
● [FTP Error.] Error code Solution Err.31 Check that the FTP server address is correct ( 0 736). Err.32 Check that the login name and password are correct ( 0 736). Err.34 Check that the destination folder name is correct ( 0 736). Err.35 Confirm that the destination folder is not write-protected. Err.36 Check the DNS ( 0 736). Check firewall settings ( 0 320). Err.37 Check PASV mode settings ( 0 736). Err.3F Turn the camera off and then on again.
Connecting to Other Cameras What Inter-camera Connections Can Do for You Camera-Based Remote Photography (Synchronized Release) A master camera can be used to release the shutters on up to ten remote cameras in the same group ( 0 343). Clock Synchronization (Synchronize Date and Time) Synchronize the clocks on multiple cameras via a network ( 0 353).
Synchronized Release Configuring and Using Synchronized Release Follow the steps below to create host profiles for synchronized release. Each camera saves the pictures it takes to its own memory card. Repeat the process to create identical profiles for each camera. 1 Select [Connect to other cameras] in the network menu, then highlight [Network settings] and press 2. 2 Highlight [Create profile] and press J. 3 Name the new profile.
4 Highlight [Search for Wi-Fi network] and press J. The camera will search for networks currently active in the vicinity and list them by name (SSID). D “Easy Connect” To connect without entering an SSID or encryption key, press X in Step 4. Next, press J and choose from the options below. Option [Push-button WPS] [PIN-entry WPS] Description For routers that support push-button WPS. Press the WPS button on the router and then press the camera J button to connect. The camera will display a PIN.
5 Choose a network. Highlight a network SSID and press J. The band on which each SSID operates is indicated by an icon. Encrypted networks are indicated by a h icon. If the selected network is encrypted (h), you will be prompted to enter the encryption key. If the network is not encrypted, proceed to Step 7. If the desired network is not displayed, press X to search again. D Hidden SSIDs Networks with hidden SSIDs are indicated by blank entries in the network list.
6 Enter the encryption key. Press J and enter the encryption key for the wireless router. For more information, see the documentation for the wireless router. Press X when entry is complete. Press X again to initiate the connection. A message will be displayed for a few seconds when the connection is established.
7 Obtain or select an IP address. Highlight one of the following options and press J. Option Description Select this option if the network is configured to supply the IP [Obtain automatically] address automatically. A “configuration complete” message will be displayed once an IP address has been assigned. It is recommended that you note the remote camera IP address, as you will need it in subsequent steps. Enter the IP address and sub-net mask manually.
10 Highlight [Master/remote] and press 2. Choose a role for each camera from “master” and “remote”. [Master camera]: Pressing the shutter-release button on the master camera releases the shutters on the remote cameras. Each group can have only one master. If the group has multiple master cameras, only the first to connect to the network will actually serve in that capacity. [Remote camera]: The shutters on the remote cameras are synchronized with the shutter on the master camera.
15 Enter the remote camera IP address. Enter the remote camera IP address you noted in Step 7. Rotate the main command dial to highlight segments. Press 4 or 2 to change the highlighted segment and press J to save changes. Press X to add the remote camera to the master camera remote camera list and establish a connection.
16 Add the remaining remote cameras. When connecting to wireless networks, the cameras will display the band used by the selected SSID. The master camera shows the number of cameras in the group currently connected or not connected. The shooting display for the master camera shows a k icon together with the number of remote cameras connected.
Tip: Suspending Synchronized Release To temporarily disable synchronized release without ending the camera’s connection to the network, select [OFF] for [Connect to other cameras] > [Synchronized release] in the network menu. Tip: Viewing Remote Camera Status To view remote camera status, highlight [Remote camera list] on the master camera and press 2. Remote cameras are identified by IP address. Remote camera status is displayed as follows: - [Connected]: Normal connection.
To edit remote camera settings from the master camera, highlight the camera in the remote camera list and press 2. - To temporarily suspend the connection to the selected camera, select [OFF] for [Connect to remote camera]. - To temporarily suspend synchronized release on the selected camera, select [OFF] for [Synchronized release]. - If desired, you can then edit the camera’s IP address by highlighting [Address] and pressing 2. To reconnect, select [ON] for [Connect to remote camera].
Synchronizing Camera Clocks When the cameras are connected to the network using [Connect to other cameras] in the network menu, the clocks on all cameras in the current group connected can be set to the time and date reported by the master camera. Synchronization applies to all options in the setup menu [Time zone and date] display. 1 Connect the cameras to the network using [Connect to other cameras] > [Network settings] in the network menu. For more information, see “Synchronized Release” ( 0 343).
Flash Photography “On-Camera” Versus “Remote” You can take pictures using an optional flash unit mounted on the camera accessory shoe or one or more remote flash units. When using a flash, select [OFF] for [Silent mode] in the setup menu. Camera-Mounted Flash Units Take pictures using a flash unit mounted on the camera. See the following pages for more information ( 0 355).
Using an On-Camera Flash 1 Mount a flash unit on the camera accessory shoe. See the documentation supplied with each Speedlight for information on mounting the unit on the camera. 2 Turn on the camera and flash unit. The flash will begin charging; the flash-ready indicator (c) will appear in the shooting display when charging is complete. 3 Choose the flash control mode ( 0 358) and flash mode ( 0 359). 4 Adjust shutter speed and aperture. 5 Take pictures.
D Shutter Speed Shutter speed can be set as follows when an optional flash unit is used: Shooting mode Shutter speed b Set automatically by camera (¹⁄₂₀₀ s–¹⁄₆₀ s) P, A Set automatically by camera (¹⁄₂₀₀ s–¹⁄₆₀ s) * S ¹⁄₂₀₀ s–30 s M ¹⁄₂₀₀ s–30 s, Bulb, Time * Shutter speed may be set as slow as 30 s if slow sync, slow rear-curtain sync, or slow sync with red-eye reduction is selected for flash mode.
D i-TTL Flash Control When an optional flash unit that supports the Nikon Creative Lighting System is attached and set to TTL, the camera uses monitor pre-flashes for balanced or standard “i-TTL fill-flash” flash control. i-TTL flash control is not available with flash units that do not support the Nikon Creative Lighting System.
Flash Control Mode When an optional SB‑500, SB‑400, or SB‑300 flash unit is mounted on the camera, the flash control mode, flash level, and other flash settings can be adjusted using the [Flash control] > [Flash control mode] item in the photo shooting menu. Settings for flash units other than the SB‑500, SB‑400, and SB‑300 can only be adjusted using flash unit controls. Option Description [TTL] Flash output is adjusted automatically in response to shooting conditions.
Flash Modes The flash mode can be selected via the [Flash mode] item in the photo shooting menu. The options available vary with the shooting mode. Option I J [Fill flash] (front-curtain sync) [Red-eye reduction] Description Available in This mode is recommended in most situations. In modes P and A, shutter speed will automatically be set to values between ¹⁄₂₀₀ s (or ¹⁄₈₀₀₀ s with auto FP high-speed sync) and ¹⁄₆₀ s. b, P, S, A, M Use for portraits.
Option Description Available in The flash fires just before the shutter closes, M s [Rear-curtain sync] [Flash off] creating the effect of a stream of light behind moving light sources. Selecting mode P or A after choosing this option sets the flash mode to slow sync. Note that photos may be prone to blurring due to camera shake at slow shutter speeds. Use of a tripod is recommended. The flash does not fire.
Flash Compensation Flash compensation is used to deliberately alter flash output, for example in order to change the brightness of the subject relative to the background. Flash output can be increased to make the main subject appear brighter, reduced to prevent glare, or otherwise fine-tuned to produce the desired result. Adjusting Flash Compensation Flash output can be adjusted using the [Flash compensation] item in the photo shooting menu. Choose from values of from −3 to +1 EV in increments of ¹⁄₃ EV.
FV Lock This feature is used to lock flash output for optional CLS-compatible flash units, letting you take multiple photos or recompose shots without changing the flash level. Your subject need not be in the center of the frame, giving you more freedom when composing shots. Flash output is adjusted automatically for any changes in ISO sensitivity and aperture. FV lock is not available in b mode. 1 Assign [FV lock] to a control using Custom Setting f2 [Custom controls (shooting)].
5 Lock flash level. After confirming that the flash-ready indicator (c) appears in the shooting display, press the [FV lock] control; the flash unit will emit a monitor pre-flash to determine the appropriate flash level. Flash output will lock and an FV lock icon (r) will appear in the shooting display. 6 Recompose the shot. 7 Press the shutter-release button the rest of the way down to shoot. If desired, additional pictures can be taken without releasing FV lock.
Remote Flash Photography What Is Remote Flash Photography? Take pictures with one or more remote flash units using wireless flash control (Advanced Wireless Lighting, or AWL). For information on using a flash unit mounted on the camera accessory shoe, see “Using an On-Camera Flash” ( 0 355). Throughout this chapter, operations involving an accessory connected to the camera are indicated by C, operations involving remote flash units by f.
Controlling Remote Flash Units Remote flash units can be controlled via optical signals from an optional flash unit mounted on the camera accessory shoe and functioning as a master flash (optical AWL). For information on compatible flash units, see “Features Available with CLS-Compatible Flash Units” ( 0 789). If the flash unit in question is an SB‑500, settings can be adjusted from the camera. For more information, see “Using Optical AWL with the SB‑500” ( 0 366).
Using Optical AWL with the SB‑500 Mount the flash unit on the camera accessory shoe. Select [Optical AWL] for [Flash control] > [Wireless flash options] in the photo shooting menu and take pictures using group flash control. Settings for the flash units in each group can be adjusted separately. 1 C: Highlight [Group flash options] in the [Flash control] display and press 2.
2 C: Adjust flash output and choose the channel and flash control mode. Choose the flash control mode and flash level for the master flash and the remote flash units in each group. The following options are available: Option Description TTL i-TTL flash control. qA Auto aperture. Available only with compatible flash units. M –– (off) Choose the flash level manually. The remote units do not fire. [Comp.] cannot be adjusted. Choose Channel [3]. 3 f: Set the remote flash units to Channel [3].
6 C/f: Take the photograph after confirming that the flash-ready lights for all flash units are lit.
The Photo Shooting Menu Menu Items and Defaults To view the photo shooting menu, select the C tab in the camera menus. The options in the photo shooting menu are listed below, together with their default settings.
[Set Picture Control (HLG)]: Standard [Color space]: sRGB [Active D-Lighting]: Off [Long exposure NR]: OFF [High ISO NR]: Normal [Vignette control]: Normal [Diffraction compensation]: ON [Auto distortion control]: ON [Skin softening]: Off [Portrait impression balance]: Off [Photo flicker reduction]: OFF [Metering]: Matrix metering [Flash control] - [Flash control mode]: TTL - [Wireless flash options]: Off [Flash mode]: Fill flash [Flash compensation]: 0.
- [Intervals×shots/interval]: 0001×1 - [Exposure smoothing]: ON - [Electronic shutter options] - [Electronic shutter]: ON - [Volume]: 0 - [Interval priority]: OFF - [Focus before each shot]: OFF - [Options]: Off - [Starting storage folder] - [New folder]: U - [Reset file numbering]: U [Time-lapse video] - [Interval]: 5 s - [Shooting time]: 25 min. - [Exposure smoothing]: ON - [Electronic shutter options] - [Electronic shutter]: ON - [Volume]: 0 - [Choose image area]: FX - [Video file type]: H.
Reset Photo Shooting Menu G button U C photo shooting menu Reset all photo shooting menu settings to their default values. Photo shooting menu settings cannot be reset while a multiple exposure is in progress.
Storage Folder G button U C photo shooting menu Choose the folder in which subsequent pictures will be stored. 1 2 3 1 2 Folder Folder number Folder name 3 D “Storage Folder” Changes to [Storage folder] made in the photo shooting menu apply in the video recording menu and vice versa. Renaming Folders The default folder name, which appears after the folder number, is “NCZ_F”. To choose a different five-character folder name for new folders, select [Rename]. Existing folders cannot be renamed.
“Select Folder by Number” The folder in which subsequent pictures will be stored can be selected by number. If a folder with the specified number does not already exist, a new folder will be created. 1 Choose [Select folder by number]. Highlight [Select folder by number] and press 2 to display the [Select folder by number] dialog. The card on which the new folder will be created is underlined in the card slot display area at the top right corner of the [Select folder by number] dialog.
“Select Folder from List” To choose from a list of existing folders: 1 Choose [Select folder from list]. Highlight [Select folder from list] and press 2 to display the [Select folder from list] dialog. 2 Highlight a folder. Press 1 or 3 to highlight a folder. 3 Select the highlighted folder. Press J to select the highlighted folder and return to the main menu. Subsequent photographs will be stored in the selected folder.
D Cautions: Folder and File Numbers When the current folder number reaches 999, the camera will no longer be able to create new folders and the shutter release will be disabled if: - the current folder contains 5000 pictures (in addition, video recording will be disabled if the camera calculates that the number of files needed to record a video of the maximum length would result in the folder containing over 5000 files), or - the current folder contains a picture numbered 9999 (in addition, video recording
File Naming G button U C photo shooting menu Pictures are saved using file names consisting of “DSC_” followed by a four-digit number and a three-letter extension. [File naming] is used to select three letters to replace the “DSC” portion of the file name. For information on text entry, see “Text Entry” ( 0 74). D File Names File names take the form “DSC_nnnn.
Primary Slot Selection G button U C photo shooting menu Choose which of the SD and microSD memory card slots functions as the primary slot when two memory cards are inserted. Option Description [SD card slot] The SD memory card slot functions as the primary slot. [microSD card slot] The microSD memory card slot functions as the primary slot. Tip: Recording Videos The slot to which videos are recorded is selected using [Destination] in the video recording menu.
Secondary Slot Function G button U C photo shooting menu Choose the role played by the card in the secondary slot when two memory cards are inserted in the camera. Option Description P [Overflow] The card in the secondary slot is used only when the card in the primary slot is full. Q [Backup] Each picture is recorded twice, once to the card in the primary slot and again to the card in the secondary slot.
Option b [HEIF primary HEIF secondary] Description This option is available when [HLG] is selected for tone mode. Two HEIF copies are recorded, one to each memory card. The copy saved to the card in the primary slot is recorded at the image quality and size selected in the photo shooting menu. The copy saved to the card in the secondary slot is saved at an image quality of [JPEG/ HEIF basic] and a size of either [Medium] or [Small].
D Caution: “RAW Primary - JPEG Secondary” If [ON] is selected for [Multiple exposure] > [Save individual pictures (RAW)] in the photo shooting menu, or if [ON] is selected for [HDR overlay] > [Save individual pictures (RAW)] in the photo shooting menu, unprocessed copies of the individual NEF (RAW) photos that make up each multiple exposure or HDR picture will be recorded to both memory cards together with the JPEG composite, regardless of the option selected for image quality.
Deleting Copies When deleting pictures recorded using [Backup], [RAW primary - JPEG secondary], [JPEG primary JPEG secondary], [RAW primary - HEIF secondary], or [HEIF primary - HEIF secondary], you have the choice of erasing either both copies or only the copy on the card in the current slot. Pressing O when a picture created using either of these options is highlighted during playback displays a confirmation message.
Image Area G button U C photo shooting menu Adjust image area settings. For more information, see “Adjusting Image Area Settings” ( 0 108), part of the section on “Image Recording Options (Image Area, Quality, and Size)” in the “Shooting Settings” chapter.
Tone Mode G button U C photo shooting menu The camera offers a choice of two tone modes: [SDR] and [HLG]. Option [SDR] [HLG] Description This mode supports a normal range of brightnesses (dynamic range). Pictures taken while this option is selected are stored in JPEG format (extension “*.JPG”). This mode supports HDR (high dynamic range). Pictures taken while this option is selected are stored in HEIF format (extension “*.HIF”). It has a wider dynamic range than SDR.
D Taking Photos in HLG Pictures taken with [HLG] selected for tone mode exhibit more “noise“ (in the form of randomlyspaced bright pixels, fog, and lines) than do pictures taken using [SDR]. Selecting values between ISO 100 and 320 on the ISO sensitivity dial sets ISO sensitivity to ISO 400. The lowest value available for the [ISO sensitivity settings] > [Maximum sensitivity] item in the photo shooting menu is ISO 800. ISO sensitivities of Hi 0.3 through Hi 1.7 are not available.
Tip: HLG Hybrid Log-Gamma (HLG) technology was developed for television broadcasting and other highdefinition applications. Compared with Standard Dynamic Range (SDR), it increases the amount of detail that can be expressed in the upper half of the tone range for greater rendering potential. It matches SDR in the level of detail that can be expressed in the lower portion of the tone range to ensure compatibility with non-HDR displays.
Image Quality G button U C photo shooting menu Choose a file format for photographs. For more information, see “Adjusting Image Quality” ( 0 110), part of the section on “Image Recording Options (Image Area, Quality, and Size)” in the “Shooting Settings” chapter.
Image Size Settings G button U C photo shooting menu Choose the size, in pixels, of pictures recorded with the camera. For more information, see “Choosing an Image Size” ( 0 112), part of the section on “Image Recording Options (Image Area, Quality, and Size)” in the “Shooting Settings” chapter.
RAW Recording G button U C photo shooting menu Choose a compression type for NEF (RAW) photographs. In descending order by the size of the files produced, the options are: [Lossless compression], [High efficiencym], and [High efficiency]. [High efficiencym] produces pictures that compare favorably in quality to those produced by [Lossless compression] and are higher in quality than those produced by [High efficiency].
ISO Sensitivity Settings G button U C photo shooting menu Adjust ISO sensitivity settings for photographs. Option Description View the ISO sensitivity selected with the ISO sensitivity dial. When the dial is rotated to C, this option can also be used to adjust [ISO sensitivity] ISO sensitivity. Choose from settings of ISO 100 to 64000, settings below ISO 100 by about 0.3, 0.7, and 1 EV (ISO 50 equivalent), and settings above ISO 64000 by about 0.3, 0.5, 1, and 1.7 EV (ISO 204800 equivalent).
White Balance G button U C photo shooting menu Adjust white balance to match the color of the light source. For more information, see “White Balance” ( 0 157) in the “Shooting Settings” chapter.
Set Picture Control G button U C photo shooting menu Choose image processing (“Picture Control”) options for new photos according to the scene or your creative intent. For more information, see “Picture Controls” ( 0 176) in the “Shooting Settings” chapter.
Manage Picture Control G button U C photo shooting menu Save modified Picture Controls as custom Picture Controls. For more information, see “Custom Picture Controls” ( 0 183) in the “Picture Controls” section of the “Shooting Settings” chapter.
Set Picture Control (HLG) G button U C photo shooting menu Choose image processing (“Picture Control”) options for photos taken with [HLG] selected for tone mode. Option Description c [Standard] Standard processing for balanced results. Recommended for most situations. d [Monochrome] Take monochrome photographs. e [Flat] Choose for photographs that will later be extensively processed or retouched.
3 Adjust settings. Press 1 or 3 to highlight settings and 4 or 2 to choose a value. Each press increments the highlighted value by 1. The options available vary with the Picture Control selected. To quickly adjust levels for balanced [Sharpening], [Midrange sharpening], and [Clarity], highlight [Quick sharp] and press 4 or 2. To abandon any changes and start over from default settings, press the O button. Tip: The Sub-command Dial To adjust the highlighted value in increments of 0.
HLG Picture Control Settings Option Description Apply sharpening to areas of contrast within the picture. Adjusting [Quick sharp] simultaneously adjusts [Sharpening], [Midrange sharpening], and [Clarity] for well-balanced results. Choose [Quick sharp] higher values for heightened sharpness. Choose lower values for greater softness. [Sharpening], [Mid-range sharpening], and [Clarity] each apply to different areas within the picture. Each can be adjusted individually.
D The j Indicator The j indicator under the value display in the Picture Control setting menu indicates the previous value for the setting. D “Filter Effects” Choose from the following [Filter effects]: Option Description [Y] (yellow) * These options enhance contrast and can be used to tone down the brightness of [O] (orange) * [R] (red) * [G] (green) * the sky in landscape photographs. Orange [O] produces more contrast than yellow [Y], red [R] more contrast than orange. Green softens skin tones.
Color Space G button U C photo shooting menu The color space determines the gamut of colors available for color reproduction. [sRGB] is recommended for general-purpose printing and display. With a broader gamut of colors than [sRGB], [Adobe RGB] is a better choice for professional publication and commercial printing. D Caution: Color Space The selected color space may be overwritten when pictures are opened in third-party software. NX Studio can open pictures in the color space selected on the camera.
Active D‑Lighting G button U C photo shooting menu Preserve details in highlights and shadows, creating pictures with natural contrast. Use for highcontrast scenes, for example when photographing brightly-lit outdoor scenery through a door or window or taking pictures of shaded subjects on a sunny day. Active D-Lighting is most effective when used with matrix metering.
The selected option is shown by an icon in the shooting display. D Cautions: Active D-Lighting Depending on the subject, “noise” in the form of randomly-spaced bright pixels, fog, or lines may appear in photos taken with Active D-Lighting. In mode M, [Y Auto] is equivalent to [Q Normal]. Uneven shading may be visible with some subjects. This function does not apply at high ISO sensitivities (Hi 0.3–Hi 1.7), including high sensitivities selected via auto ISO sensitivity control.
Long Exposure NR G button U C photo shooting menu Select [ON] to reduce “noise” (bright spots or fog) in photographs taken at shutter speeds slower than 1 s. Long-exposure noise reduction is performed after the photo is taken. During processing, the message, “[Performing noise reduction]” will appear in the shooting display. Pictures cannot be taken until the message has cleared from the display. The time needed to record photos after shooting roughly doubles.
High ISO NR G button U C photo shooting menu Photographs taken at high ISO sensitivities can be processed to reduce “noise” (randomly-spaced bright pixels). Option Description [High] [Normal] Reduce noise in photographs taken at all ISO sensitivities. The higher the sensitivity, the greater the effect. Choose the amount of noise reduction performed from (in order from high to low) [High], [Normal], and [Low]. [Low] [Off] Noise reduction is performed only as required.
Vignette Control G button U C photo shooting menu Vignette control reduces “vignetting”—a drop in brightness at the edges of a photograph—by an amount that varies from lens to lens. Its effects are most noticeable at maximum aperture. Option e [High] g [Normal] f [Low] [Off] Description Choose the amount of vignette control performed from (in order from high to low) [High], [Normal], and [Low]. Vignette control disabled.
Diffraction Compensation G button U C photo shooting menu Select [ON] to reduce diffraction at small apertures (high f-numbers). D Diffraction Compensation Changes to [Diffraction compensation] in the photo shooting menu apply in the video recording menu and vice versa.
Auto Distortion Control G button U C photo shooting menu Select [ON] as required to reduce barrel distortion when shooting with wide-angle lenses and to reduce pin-cushion distortion when shooting with long lenses. Note that [ON] may be selected automatically with some lenses, in which case this item will be grayed out and unavailable. D Auto Distortion Control Changes to [Auto distortion control] in the photo shooting menu apply in the video recording menu and vice versa.
Skin Softening G button U C photo shooting menu Pictures taken when the face of a human portrait subject is detected will automatically be processed to soften the subject’s complexion. Option [High] Description Choose the amount of skin softening performed from (in order from high to low) [High], [Normal], and [Low]. [Normal] The camera can perform skin softening on up to three subjects at a time.
Portrait Impression Balance G button U C photo shooting menu Fine-tune hue and brightness settings for human portrait subjects and save the results for application during shooting as [Mode 1], [Mode 2], or [Mode 3]. Creating Portrait Impression Balance Modes 1 Select [Portrait impression balance] in the photo shooting menu. 2 Highlight a mode from [Mode 1] through [Mode 3] and press 2. Options for the selected mode will be displayed. 3 Adjust hue and brightness.
4 Save changes. Press J to save changes and exit to the menus. Modes that have been altered from default values are indicated by asterisks (“U”). Repeat Steps 1 through 4 to create additional modes. Applying Saved Modes To enable portrait impression balance during shooting, select the desired mode ([Mode 1] through [Mode 3]) for [Portrait impression balance] in the photo shooting menu.
Photo Flicker Reduction G button U C photo shooting menu Selecting [ON] reduces the effects of flicker from such light sources as fluorescent or mercury-vapor lamps. Flicker can cause uneven exposure or (in photographs taken in continuous release modes) inconsistent exposure or coloration. If flicker reduction does not produce the desired results, turn the camera off and aim it at the subject or light source before turning it on again.
D “Photo Flicker Reduction” Flicker reduction may slightly delay shutter response. Flicker reduction can detect flicker at 100 and 120 Hz (associated respectively with AC power supplies of 50 and 60 Hz). The desired results may not be achieved if the frequency of the power supply changes during burst photography.
Metering G button U C photo shooting menu Metering determines how the camera sets exposure. Option L M [Matrix metering] [Center-weighted metering] Description The camera meters a wide area of the frame and sets exposure according to tone distribution, color, composition, and distance for results close to those seen by the naked eye. The camera assigns the greatest weight to the center of the frame. This mode can, for example, be used with subjects that dominate the composition.
Flash Control G button U C photo shooting menu Adjust settings for wireless remote flash units or optional flash units mounted on the camera accessory shoe. For information on adjusting settings for optional flash units mounted on the camera accessory shoe, see “Using an On-Camera Flash” ( 0 355). For information on adjusting settings for wireless remote flash units, see “What Is Remote Flash Photography?” ( 0 364).
Wireless Flash Options Adjust settings for simultaneous wireless control of multiple remote flash units. This option is available only when an SB‑500 flash unit is mounted on the camera. Option Y [Off] [Optical AWL] Description The remote flash units are controlled using low-intensity flashes emitted by the master flash ( 0 365). Remote flash photography disabled. Group Flash Options Adjust settings for the units in each group when using optional remote flash units.
Flash Mode G button U C photo shooting menu Choose a flash mode for camera-mounted or remote optional flash units. For more information, see “Flash Modes” ( 0 359) in “Flash Photography”.
Flash Compensation G button U C photo shooting menu Flash compensation is used to deliberately alter the output of optional flash units, for example in order to change the brightness of the subject relative to the background. Flash output can be increased to make the main subject appear brighter, reduced to prevent glare, or otherwise fine-tuned to produce the desired result ( 0 361).
Release Mode G button U C photo shooting menu Choose the operation performed when the shutter-release button is pressed all the way down. For more information, see “Release Mode” ( 0 145) in the “Shooting Settings” chapter.
Focus Mode G button U C photo shooting menu Control how the camera focuses. For more information, see “Focus Mode” ( 0 114), part of the section on “Focus” in the “Shooting Settings” chapter.
AF-Area Mode G button U C photo shooting menu Choose how the camera selects the focus point for autofocus. For more information, see “AF-Area Mode” ( 0 116), part of the section on “Focus” in the “Shooting Settings” chapter.
AF/MF Subject Detection Options G button U C photo shooting menu Choose the type of subject to which the camera gives priority when focusing. For more information, see “Subject Detection” ( 0 120), part of the section on “Focus” in the “Shooting Settings” chapter.
MF Subject Detection Area G button U C photo shooting menu Choose the manual focus subject detection area. For more information, see “Using Subject Detection with Manual Focus” ( 0 121) in the “Subject Detection” portion of the “Focus” section.
Vibration Reduction G button U C photo shooting menu Choose whether to enable vibration reduction. The options available vary with the lens. Option Description C [Normal] Choose for enhanced vibration reduction when photographing static subjects. D [Sport] Choose when photographing athletes and other subjects that are moving rapidly and unpredictably. [Off] Vibration reduction is disabled. D Cautions: Using Vibration Reduction Vibration reduction may be unavailable with some lenses.
Link VR to Focus Point G button U C photo shooting menu Choose whether vibration reduction is optimized to reduce blur at the current focus point. Option Description [ON] Optimize vibration reduction to reduce blur at the current focus point. [OFF] Optimize vibration reduction to reduce blur at the center of the frame. D Cautions: “Link VR to Focus Point” Enabling this option configures vibration reduction to minimize blur at the focus point active when the shutter is released.
Auto Bracketing G button U C photo shooting menu Bracketing automatically varies exposure, flash level, Active D-Lighting (ADL), or white balance slightly with each shot, “bracketing” the current value. Bracketing can be used in situations in which getting the right settings is difficult and there is not time to check results and adjust settings with each shot, or to experiment with different settings for the same subject. Option Description [Auto bracketing on/off] Select [ON] to enable bracketing.
Exposure and Flash Bracketing No exposure compensation −1 EV 1 Highlight [Auto bracketing] in the photo shooting menu and press 2. 2 Select [AE & flash bracketing], [AE bracketing], or [Flash bracketing] for [Auto bracketing set]. +1 EV [Number of shots] and [Increment] options will be displayed. 3 Choose the number of shots in the bracketing sequence. Highlight [Number of shots] and press 4 or 2 to choose the number of shots.
4 Choose the bracketing increment. Highlight [Increment] and press 4 or 2 to choose the bracketing increment. The size of the increment can be chosen from 0.3 (¹⁄₃ EV), 0.7 (²⁄₃ EV), 1.0 (1 EV), 2.0 (2 EV), and 3.0 (3 EV). Bracketing programs with an increment of 2.0 or 3.0 EV offer a maximum of 5 shots. If a value of 7 or 9 was selected in Step 3, the number of shots will automatically be set to 5. The bracketing programs with an increment of 0.3 are listed below.
6 Take pictures. Take the number of pictures in the bracketing program. The modified values for shutter speed and aperture are shown in the display. While bracketing is in effect, the shooting display shows a bracketing icon, a bracketing progress indicator, and the number of shots remaining in the bracketing sequence. After each shot, a segment will disappear from the indicator and the number of shots remaining will be reduced by one. No. shots: 3 Increment: 0.
Tip: Bracketing Options When [AE & flash bracketing] is selected, the camera varies both exposure and flash level. Select [AE bracketing] to vary only exposure, [Flash bracketing] to vary only flash level. Note that flash bracketing is available in i-TTL and, where supported, auto aperture (qA) flash control modes only ( 0 357, 0 789).
Tip: Exposure Bracketing The settings (shutter speed and/or aperture) altered during exposure bracketing vary with the shooting mode. Mode Setting P Shutter speed and aperture 1 S Aperture 1 A Shutter speed 1 M Shutter speed 2, 3, 4 1 If [ON] is selected for [ISO sensitivity settings] > [Auto ISO sensitivity control] in the photo shooting menu, the camera will automatically vary ISO sensitivity for optimum exposure when the limits of the camera exposure system are exceeded.
White Balance Bracketing 1 Highlight [Auto bracketing] in the photo shooting menu and press 2. 2 Select [WB bracketing] for [Auto bracketing set]. [Number of shots] and [Increment] options will be displayed. 3 Choose the number of shots in the bracketing sequence. Highlight [Number of shots] and press 4 or 2 to choose the number of shots.
4 Choose the bracketing increment. Highlight [Increment] and press 4 or 2 to choose the bracketing increment. The size of the increment can be chosen from 1 (1 step), 2 (2 steps), or 3 (3 steps). Each step is equivalent to 5 mired. Higher “A” values correspond to increased amounts of amber. Higher “B” values correspond to increased amounts of blue. The bracketing programs with an increment of 1 are listed below. 5 White balance bracketing indicator No.
6 Take pictures. Each shot will be processed to create the number of copies specified in the bracketing program, and each copy will have a different white balance. Modifications to white balance are added to the white balance adjustment made with white balance fine-tuning. If the number of shots in the bracketing program is greater than the number of exposures remaining, the shutter release will be disabled. Shooting can begin when a new memory card is inserted.
ADL Bracketing 1 Highlight [Auto bracketing] in the photo shooting menu and press 2. 2 Select [ADL bracketing] for [Auto bracketing set]. [Number of shots] and [Amount] options will be displayed. 3 Choose the number of shots in the bracketing sequence. Highlight [Number of shots] and press 4 or 2 to choose the number of shots.
The number of shots determines the bracketing sequence: No. of shots Bracketing sequence 2 Off → Value selected in Step 4 3 Off → Low → Normal 4 Off → Low → Normal → High 5 Off → Low → Normal → High → Extra high If you chose more than two shots, proceed to Step 5. 4 Choose the Active D-Lighting amount. Highlight [Amount] and press 4 or 2 to choose the Active D-Lighting setting for the second shot when the number of shots in the bracketing sequence is 2.
5 Select [ON] for [Auto bracketing on/off]. Selecting [ON] enables bracketing, and an icon will appear in the shooting display. 6 Take pictures. Take the number of pictures in the bracketing program. While bracketing is in effect, the shooting display shows an ADL bracketing icon and the number of shots remaining in the bracketing sequence. After each shot, the number of shots remaining will be reduced by one.
D ADL Bracketing In continuous release modes, shooting will pause after the number of shots specified in the bracketing program has been taken. Shooting will resume the next time the shutter-release button is pressed. If the camera is turned off before all shots in the sequence have been taken, bracketing will resume from the first shot in the sequence when the camera is turned on.
Multiple Exposure G button U C photo shooting menu Record two to ten NEF (RAW) exposures as a single photograph. Option [Multiple exposure mode] [Number of shots] Description [On (series)]: Take a series of multiple exposures. To end multiple exposure photography, select [Multiple exposure mode] again and choose [Off]. [On (single photo)]: End multiple exposure photography after creating a single multiple exposure. [Off]: End multiple exposure photography.
Option [Save individual pictures (RAW)] Description [ON]: Save both the multiple exposure and the shots that make it up; the pictures are saved in NEF (RAW) format. [OFF]: Discard the individual shots and save only the multiple exposure. [Overlay shooting] If [ON] is selected, earlier exposures will be superimposed on the view through the lens. The earlier exposures aid composition of the next shot. [Select first exposure (RAW)] Choose the first exposure from the NEF (RAW) pictures on the memory card.
Creating a Multiple Exposure 1 Highlight [Multiple exposure] in the photo shooting menu and press 2. 2 Choose an option for [Multiple exposure mode]. Highlight [Multiple exposure mode] and press 2. Highlight a multiple exposure mode using 1 or 3 and press J. If [On (series)] or [On (single photo)] is selected, an icon will appear in the display. 3 Choose a value for [Number of shots] (number of exposures). Highlight [Number of shots] and press 2.
5 Choose a setting for [Save individual pictures (RAW)]. To save both the multiple exposure and the shots that make it up, select [ON]; the individual shots are saved in NEF (RAW) format. To save only the multiple exposure, select [OFF]. 6 Choose an option for [Overlay shooting]. Select [ON] to superimpose earlier exposures on the view through the lens. You can use the earlier exposures as a guide when composing subsequent shots. 7 Choose an option for [Select first exposure (RAW)].
8 Start shooting. Take the selected number of shots. If you used [Select first exposure (RAW)] to select an existing NEF (RAW) picture as the first exposure in Step 7, shooting will start from the second exposure. Once you have taken the selected number of shots, the pictures will be overlaid to create a multiple exposure. Multiple exposures are recorded in JPEG format regardless of the option selected for image quality.
The i Menu Pictures can be viewed by pressing the K button while a multiple exposure is in progress. The most recent shot in the current multiple exposure is indicated by a $ icon; pressing the i button when this icon is present displays the multiple exposure i menu. Highlight items and press J to select. You also have the option of using touch controls after pressing the i button. Option Description [View progress] View a preview created from the exposures recorded to the current point.
D Cautions: Multiple Exposure If you use the menus or view pictures in the display while shooting a multiple exposure, remember that shooting will end and the multiple exposure will be recorded if no operations are performed for about 40 seconds (or in the case of menus, about 90 seconds). The time available to record the next exposure can be extended by choosing longer times for Custom Setting c3 [Power off delay] > [Playback] or [Menus].
Ending Multiple Exposures To end a multiple exposure before the specified number of exposures have been taken, select [Off] for multiple exposure mode. A multiple exposure will be created from the exposures that have been recorded to that point (if [Average] is selected for [Overlay mode], gain will be adjusted to reflect the number of exposures actually recorded).
HDR Overlay G button U C photo shooting menu Used with high contrast subjects, High Dynamic Range (HDR) preserves details in highlights and shadows by combining two shots taken at different exposures. Use with high-contrast scenes and other subjects to preserve a wide range of details, from highlights to shadows. Option [HDR mode] Description [On (series)]: Take a series of HDR photographs. To end HDR photography, select [HDR mode] again and choose [Off].
Taking HDR Photographs We recommend that you use matrix metering when shooting with HDR. 1 Highlight [HDR overlay] in the photo shooting menu and press 2. 2 Select an [HDR mode]. Highlight [HDR mode] and press 2. Highlight one of the following options using 1 or 3 and press J. If [On (series)] or [On (single photo)] is selected, an icon will appear in the display.
3 Choose an [HDR strength]. Highlight [HDR strength] and press 2. Highlight an option using 1 or 3 and press J. If [Auto] is selected, the camera will automatically adjust HDR strength to suit the scene. 4 Choose a setting for [Save individual pictures (RAW)]. Choose [ON] to save each of the individual shots used to create the HDR picture; the shots are saved in NEF (RAW) format. 5 Frame the photograph, focus, and shoot.
D Cautions: HDR Photography The edges of the picture will be cropped out. The desired results may not be achieved if the camera or subject moves during shooting. Use of a tripod is recommended. Depending on the scene, you may notice shadows around bright objects or halos around dark objects. In other cases, the effect produced by HDR may not be particularly noticeable. Uneven shading may be visible with some subjects.
Interval Timer Shooting G button U C photo shooting menu Take photographs at the selected interval until the specified number of shots has been recorded. When using the interval timer, select a release mode other than self-timer or high-speed frame capture. Option Description [Start] Start interval timer shooting. Shooting will begin either after about 3 s ([Now] selected for [Choose start day/time]) or at a selected date and time ([Choose day/time]).
Option Description [ON]: Enable interval priority to ensure that frames shot in modes P and A are taken at the chosen interval. - Flash photography is disabled. - Release priority is enabled regardless of the options selected for [Interval priority] Custom Settings a1 [AF-C priority selection] and a2 [AF-S priority selection].
Interval-Timer Photography D Before Shooting Take a test shot at current settings. Before proceeding, select [Time zone and date] in the setup menu and make sure that the camera clock is set to the correct time and date.
Choose the interval between shots. Highlight [Interval] and press Choose an interval (in hours, minutes, and seconds) and 2. press J. Choose the number of intervals and number of shots per interval. Highlight [Intervals×shots/ interval] and press 2. Choose the number of intervals and the number of shots per interval and press J. - In single frame release mode, the photographs for each interval will be taken at the rate for continuous high-speed release mode. Enable or disable exposure smoothing.
Choose whether to use the electronic shutter. Highlight [Electronic shutter Highlight [Electronic shutter] options] and press 2. and press 2 to select [ON] or [OFF]. - The volume of the sound made when the electronic shutter is released can be chosen using [Volume]. Choose an interval priority option. Highlight [Interval priority] and press 2 to select [ON] or [OFF]. Choose whether the camera focuses between shots. Highlight [Focus before each shot] and press 2 to select [ON] or [OFF].
Choose additional options. Highlight [Options] and press 2. Highlight [AE bracketing] or [Time-lapse video] and press J. - If you selected [AE bracketing], choose values for [Number of shots] and [Increment]; if you selected [Time-lapse video], choose settings for [Video file type], [Frame size/ frame rate], and [Destination]. Choose starting folder options. Highlight [Starting storage folder] and press 2. After highlighting the desired options and pressing J to turn them on (M) or off (U), press 4.
D During Shooting The memory card access lamp flashes between shots. If the display is turned on by pressing the shutter-release button halfway, the message [Interval timer shooting] will be displayed and the 7 icon will flash. If [Time-lapse video] is selected for [Options], a 8 icon will also be displayed.
Resuming Interval-Timer Photography Interval timer shooting can be resumed as described below. To resume shooting immediately: Highlight [Restart] and press J. To resume shooting at a specified time: - Highlight [Restart option] and press 2, then highlight [Choose day/time] and press 2. - Choose a starting date and time and press J. - Highlight [Restart] and press J.
Ending Interval-Timer Photography To end interval-timer photography before all the photos are taken, select [Interval timer shooting] in the photo shooting menu, highlight [Off], and press J. Note that the menus may not be displayed when the G button is pressed if the time selected for [Interval] is very short. In this case you will need to press J to pause interval-timer photography and then select [Interval timer shooting] in the photo shooting menu, highlight [Off], and press J.
D Cautions: Interval-Timer Photography Choose an interval longer than the time needed to take the selected number of shots at the predicted shutter speed. Note that during actual interval-timer photography, the camera must not only take shots at the selected interval but must also have sufficient time to complete the exposures and perform such tasks as processing the photographs. If the interval is too short to take the selected number of photos, the camera may skip to the next interval without shooting.
D Release Mode Regardless of the release mode selected, the camera will take the specified number of shots at each interval. D Adjusting Settings Between Shots Pictures can be viewed and shooting and menu settings adjusted between shots. Note, however, that the display will turn off and shooting will resume a few seconds before the next shot is taken.
Time-Lapse Video G button U C photo shooting menu The camera automatically takes photos at selected intervals to create a time-lapse video. Option Description Start time-lapse recording. Shooting starts after about 3 s and continues [Start] at the interval selected for [Interval] for the time selected for [Shooting time]. [Interval] Choose the interval between shots, in minutes and seconds. [Shooting time] Choose how long the camera will continue to take pictures, in hours and minutes.
Option [Interval priority] Description [ON]: Enable interval priority to ensure that frames shot in modes P and A are taken at the chosen interval. - Release priority is enabled regardless of the options selected for Custom Settings a1 [AF-C priority selection] and a2 [AF-S priority selection].
Recording Time-Lapse Videos D Before Shooting Time-lapse videos are shot using the video crop. Take test shots and check the results in the monitor. Before proceeding, select [Time zone and date] in the setup menu and make sure that the camera clock is set to the correct time and date.
Choose the total shooting time. Highlight [Shooting time] and press 2. Choose a shooting time (in hours and minutes) and press J. - The maximum shooting time is 23 hours and 59 minutes. Enable or disable exposure smoothing. Highlight [Exposure smoothing] and press 2 to select [ON] or [OFF]. - Selecting [ON] smooths abrupt changes in exposure. Choose whether to use the electronic shutter. Highlight [Electronic shutter options] and press 2.
Choose the image area. Highlight [Choose image area] and press 2. Highlight an option and press J. Choose a video file type. Highlight [Video file type] and press 2. Highlight an option and press J. Choose the frame size and rate. Highlight [Frame size/frame rate] and press 2. Highlight an option and press J.
Choose an interval priority option. Highlight [Interval priority] and press 2 to select [ON] or [OFF]. Choose whether the camera focuses between shots. Highlight [Focus before each shot] and press 2 to select [ON] or [OFF]. - If [ON] is selected for [Focus before each shot], the camera will focus before each shot according to the option currently selected for focus mode. Choose a destination. Highlight [Destination] and press 2.
3 Highlight [Start] and press J. Shooting starts after about 3 s. The display turns off during shooting. The camera takes pictures at interval selected for [Interval] for the time selected for [Shooting time] in Step 2. D During Shooting The memory card access lamp flashes between shots. If the display is turned on by pressing the shutter-release button halfway, the message [Interval timer shooting] will be displayed and the 8 icon will flash.
D Calculating the Length of the Final Video The total number of frames in the final video can be calculated by dividing the shooting time selected in Step 2 by the interval, rounding up, and adding 1. The length of the final video can then be calculated by dividing the number of shots by the frame rate selected for [Frame size/frame rate] (for example, a 48-frame video recorded with [1920×1080; 24p] selected for [Frame size/frame rate] will be about two seconds long).
D Cautions: Time-Lapse Videos Sound is not recorded with time-lapse videos. The shutter speed and the time needed to record the picture to the memory card may vary from shot to shot. As a result, camera may be unable to take shots at the selected interval.
D Adjusting Settings Between Shots Shooting and menu settings can be adjusted between shots. Note, however, that the monitor will turn off approximately 2 s before the next shot is taken. D Time-Lapse Videos: Restrictions Time-lapse video recording cannot be combined with some camera features, including: video recording, long time-exposures (“Bulb” or “Time”), the self-timer, high-speed frame capture, bracketing, multiple exposures, HDR overlay, interval-timer photography, focus shift, and pixel shift.
Focus Shift Shooting G button U C photo shooting menu Focus shift automatically varies focus over a series of shots. Use it to take photos that will later be combined using focus stacking to create a single picture with increased depth of field. Before using focus shift, choose a focus mode of AF‑S or AF‑C and a release mode other than self-timer or high-speed frame capture. Option [Start] [No.
Option Description Highlight options and press J or 2 to select (M) or deselect (U). [Starting storage folder] [New folder]: A new folder is created for each new sequence. [Reset file numbering]: File numbering is reset to 0001 whenever a new folder is created.
Focus Shift Photography D Before Shooting Take a test shot at current settings. We recommend using one of the following power sources to prevent loss of power while shooting is in progress: - A fully-charged battery - An optional EH‑7P charging AC adapter - An optional EH-8P AC adapter connected using the supplied UC‑E25 USB cable (featuring Type C connectors at both ends) 1 Focus.
3 Adjust focus shift settings. Choose the number of shots. Highlight [No. of shots] and press 2. Choose the number of shots and press J. - The maximum number of shots is 300. - We recommend taking more shots than you think you’ll need. You can winnow them down during focus stacking. - More than 100 shots may be required for photographs of insects or other small objects. On the other hand, only a few may be needed to photograph a landscape from front to back with a wide-angle lens.
Choose the interval until next shot. Highlight [Interval until next Choose the interval between shot] and press 2. shots and press J. - Choose the interval between shots, in seconds. - To ensure correct exposure when using a flash, choose an interval long enough for the flash to charge. A setting of [00] is recommended when shooting without a flash. Enable or disable first-frame exposure lock. Highlight [First-frame exposure lock] and press 2 to select [ON] or [OFF].
Choose whether to use the electronic shutter. Highlight [Electronic shutter Highlight [Electronic shutter] options] and press 2. and press 2 to select [ON] or [OFF]. - The volume of the sound made when the electronic shutter is released can be chosen using [Volume]. Choose whether the focus position returns to the starting position at the end of each sequence. Highlight [Focus position auto reset] and press 2 to select [ON] or [OFF].
Choose starting folder options. Highlight [Starting storage After highlighting the desired folder] and press 2. options and pressing J to turn them on (M) or off (U), press 4. 4 Highlight [Start] and press J. Shooting starts after about 3 s. The display turns off during shooting. The camera takes photographs at the selected interval, starting at the focus distance selected at the start of shooting and progressing out toward infinity by the selected focus step distance with each shot.
D During Shooting The memory card access lamp flashes between shots. D Cautions: Focus Shift Photography The shutter speed and the time needed to record the picture may vary from shot to shot. As a result, the camera may be unable to take shots at the selected interval. Shooting ends when focus reaches infinity, and consequently depending on the focus position at the start of shooting, shooting may end before the selected number of shots has been taken.
Tip: Aperture Given that pictures shot at very small apertures (high f-numbers) may lack definition, we recommend that you choose apertures wider (f-numbers lower) than f/8–f/11. Tip: Close-ups Because focus depth is reduced at short focus distances, we recommend choosing smaller focus steps and increasing the number of shots when photographing subjects close to the camera.
Pixel Shift Shooting G button U C photo shooting menu The camera automatically shoots a series of NEF (RAW) photos, changing the position of the image sensor with each one. The photos can be blended using Nikon’s NX Studio software to create a single high-resolution image. Option [Pixel shift shooting mode] Description [On (series)]: Take multiple series of pixel shift photos. To end pixel shift photography, select [Pixel shift shooting mode] again and choose [Off].
Taking Photos Using Pixel Shift D Before Shooting Pixel shift is intended for pictures of landscapes, buildings, and other static subjects shot with the camera on a tripod. The desired results may consequently not be achieved with moving subjects or shots taken without a tripod. To improve the image quality of the resulting pixel-shift blended pictures, we recommend performing pixel mapping via [Pixel mapping] in the setup menu before shooting. Take a test shot at current settings.
3 Select a [Pixel shift shooting mode]. Highlight [Pixel shift shooting mode] and press 2. Highlight the desired option using 1 or 3 and press J. If [On (series)] or [On (single photo)] is selected, an icon will appear in the display. - Image quality will be fixed at [RAW]. - The electronic shutter will be used regardless of the option selected for Custom Setting d5 [Shutter type]. 4 Choose the [Number of shots]. Highlight [Number of shots] and press 2.
5 Choose a value for [Delay]. Highlight [Delay] and press 2. You can now choose the delay between the shutter-release button being pressed all the way down and the start of pixel shift photography. Choose a delay (in seconds) using 1 or 3 and press J. 6 Choose a value for [Interval until next shot]. Highlight [Interval until next shot] and press 2. You can now choose the interval between shots, in seconds. Choose an interval (in seconds) using 1 or 3 and press J.
8 Blend the NEF (RAW) photos using NX Studio. See NX Studio’s online help for detailed instructions. The desired results may not be achieved if the subject moved or lighting changed during shooting. Ending Pixel Shift To end pixel-shift photography before all the photos in the current series have been taken, press the J button between shots.
D During Shooting The memory card access lamp flashes between shots. D Cautions: Pixel Shift Optional flash units will not fire. In continuous release modes, the camera will not shoot continuously while the shutter-release button is held all the way down. Changing camera settings while pixel shift is in progress may cause shooting to end. Long time-exposures (“Bulb” or “Time”) are not supported.
The Video Recording Menu Menu Items and Defaults To view the video recording menu, select the 1 tab in the camera menus. The options in the video recording menu are listed below, together with their default settings. [Reset video recording menu]: — [Storage folder] - [Rename]: NCZ_F - [Select folder by number]: 100 - [Select folder from list]: — [File naming]: DSC [Destination]: SD card slot [Video file type]: H.
[Diffraction compensation]: ON [Auto distortion control]: ON [Skin softening]: Same as photo settings [Portrait impression balance]: Off [Video flicker reduction]: Auto [Metering]: Matrix metering [Focus mode]: Full-time AF [AF-area mode]: Single-point AF [AF/MF subject detection options] - [Subject detection]: Auto - [AF when subject not detected]: ON [MF subject detection area]: MF subject detection off [Vibration reduction]: Same as photo settings [Electronic VR]: OFF [Microphone sensitivity]: Auto [Atte
Reset Video Recording Menu G button U 1 video recording menu Reset all video recording menu settings to their default values.
Storage Folder G button U 1 video recording menu Choose the folder in which subsequent pictures will be stored. More information is available in the section devoted to the [Storage folder] item in the photo shooting menu ( 0 373). D “Storage Folder” Changes to [Storage folder] made in the photo shooting menu apply in the video recording menu and vice versa.
File Naming G button U 1 video recording menu Choose the three-letter prefix used in naming the files in which videos are stored; the default prefix is “DSC” ( 0 377).
Destination G button U 1 video recording menu Choose the slot to which videos are recorded when two memory cards are inserted. The menu shows the time available on each card. Recording ends automatically when no time remains on the current card.
Video File Type G button U 1 video recording menu Choose the video file type. For more information, see the section on “Video File Types” ( 0 187) in the “Video Recording” chapter.
Frame Size/Frame Rate G button U 1 video recording menu Choose the video frame size (in pixels) and frame rate. For more information, see the section on “Video Frame Size and Rate Options” ( 0 189) in the “Video Recording” chapter.
Image Area G button U 1 video recording menu Choose a video crop. For more information, see the section on “Video Image Area Options” ( 0 192) in the “Video Recording” chapter.
ISO Sensitivity Settings G button U 1 video recording menu Adjust the following ISO sensitivity settings for use in video mode. Option Description Choose the upper limit for auto ISO sensitivity control from values between ISO 200 and Hi 2.0. [Maximum sensitivity] [Auto ISO control (mode M)] [ISO sensitivity (mode M)] The selected value serves as the upper limit for ISO sensitivity in modes P, S, and A and when [ON] is selected for [Auto ISO control (mode M)] in mode M.
White Balance G button U 1 video recording menu Choose the white balance for videos. Select [Same as photo settings] to use the option currently selected for photos ( 0 157).
Set Picture Control G button U 1 video recording menu Choose a Picture Control for videos. Select [Same as photo settings] to use the option currently selected for photos ( 0 176).
Manage Picture Control G button U 1 video recording menu Save modified Picture Controls as custom Picture Controls ( 0 183).
HLG Quality G button U 1 video recording menu Adjust HLG video image processing options for use when [HLG] is chosen as the tone mode for [Video file type] > [H.265 10-bit (MOV)] in the video recording menu. Option Description Apply sharpening to areas of contrast within the picture. Adjusting [Quick sharp] simultaneously adjusts [Sharpening], [Midrange sharpening], and [Clarity] for well-balanced results. Choose [Quick sharp] higher values for heightened sharpness.
Active D‑Lighting G button U 1 video recording menu Preserve details in highlights and shadows, creating videos with natural contrast. Option Z [Extra high] P [High] Q [Normal] R [Low] [Off] Description Choose the amount of Active D-Lighting performed from (in order from high to low) [Extra high], [High], [Normal], and [Low]. Active D-Lighting off.
High ISO NR G button U 1 video recording menu Reduce “noise” (randomly-spaced bright pixels) in videos recorded at high ISO sensitivities ( 0 402).
Vignette Control G button U 1 video recording menu Reduce vignetting in videos ( 0 403). D Vignette Control Changes to [Vignette control] in the photo shooting menu apply in the video recording menu and vice versa.
Diffraction Compensation G button U 1 video recording menu Choose whether to reduce diffraction in videos ( 0 404). D Diffraction Compensation Changes to [Diffraction compensation] in the photo shooting menu apply in the video recording menu and vice versa.
Auto Distortion Control G button U 1 video recording menu Choose whether to reduce barrel and pin-cushion distortion in videos ( 0 405). D Auto Distortion Control Changes to [Auto distortion control] in the photo shooting menu apply in the video recording menu and vice versa.
Skin Softening G button U 1 video recording menu Adjust skin softening settings for video recording. Select [Same as photo settings] to use the option currently selected for photos ( 0 406). D Restrictions on Skin Softening in Video Mode Skin softening will not be performed if [N-Log] is chosen for tone mode when [H.265 10-bit (MOV)] is selected for [Video file type] in the video recording menu.
Portrait Impression Balance G button U 1 video recording menu Adjust portrait impression balance settings for video recording ( 0 407).
Video Flicker Reduction G button U 1 video recording menu Reduce flicker and banding in the shooting display and in footage recorded under fluorescent or mercury-vapor lighting. Choose [Auto] to allow the camera to automatically choose the correct frequency. If [Auto] fails to produce the desired results, select [50 Hz] or [60 Hz] according to the frequency of the local power supply. Choose [50 Hz] for areas with a 50 Hz power supply, [60 Hz] for areas with a 60 Hz power supply.
Metering G button U 1 video recording menu Choose how the camera meters exposure in video mode. [Spot metering] is not available in the video recording menu ( 0 411).
Focus Mode G button U 1 video recording menu Choose a focus mode for video recording ( 0 114).
AF-Area Mode G button U 1 video recording menu Choose an AF-area mode for video recording ( 0 116).
AF/MF Subject Detection Options G button U 1 video recording menu Subject Detection Choose the type of subject to which the camera gives priority when focusing in video mode ( 0 120). AF When Subject Not Detected Choose whether the camera focuses if unable to detect a subject of the type selected for [Subject detection] when [Full-time AF] is selected for focus mode. If [ON] is selected, the camera will initiate autofocus whether or not a subject of the selected type is detected.
MF Subject Detection Area G button U 1 video recording menu Choose the manual focus subject detection area. For more information, see “Using Subject Detection with Manual Focus” ( 0 121) in the “Subject Detection” portion of the “Focus” section.
Vibration Reduction G button U 1 video recording menu Adjust vibration reduction settings for video mode. Select [Same as photo settings] to use the option currently selected for photos ( 0 421).
Electronic VR G button U 1 video recording menu Choose whether to enable electronic vibration reduction in video mode. D Caution: Electronic Vibration Reduction At frame rates of 120p and 100p, electronic vibration reduction is disabled, fixing [Electronic VR] at [OFF].
Microphone Sensitivity G button U 1 video recording menu Turn built-in or external microphones on or off or adjust microphone sensitivity. Option [Auto] [Manual] [Microphone off] Description Microphone sensitivity is adjusted automatically. Adjust microphone sensitivity manually. Choose from values of from [1] to [20]. The higher the value, the higher the sensitivity; the lower the value, the lower the sensitivity. Turn sound recording off.
Attenuator G button U 1 video recording menu Select [ON] to reduce microphone gain and prevent audio distortion when recording videos in loud environments.
Frequency Response G button U 1 video recording menu Choose the range of frequencies to which built-in and external microphones respond. Option Description S [Wide range] Record a wide range of frequencies. Choose for everything from music to the bustling hum of a city street. T [Vocal range] Choose for human voices.
Wind Noise Reduction G button U 1 video recording menu Select [ON] to enable the low-cut filter, reducing noise produced by wind blowing over the built-in microphone. Note that other sounds may also be affected. Selecting [ON] for [Wind noise reduction] has no effect on optional stereo microphones. Wind-noise reduction for optional stereo microphones that support this feature can be enabled or disabled using microphone controls.
Mic Jack Plug-in Power G button U 1 video recording menu The camera does not provide power to external microphones when [OFF] is selected. To prevent noise from interference generated by the power supply, we recommend turning plug-in power [OFF] when using microphones that do not require plug-in power. For information on whether your microphone requires plug-in power, consult the manufacturer.
Headphone Volume G button U 1 video recording menu Press 1 or 3 to adjust headphone volume.
Timecode G button U 1 video recording menu Choose whether to record time codes giving the hour, minute, second, and frame number for each frame when shooting videos. Time codes are not included in videos shot with [H.264 8-bit (MP4)] selected for [Video file type] in the video recording menu. Option Description [Record timecodes] [On]: Record time codes. The time code appears in the shooting display.
D Caution: HDMI Devices Selecting [On (with HDMI output)] for [Record timecodes] may disrupt footage output to HDMI devices.
External Rec. Cntrl (HDMI) G button U 1 video recording menu Selecting [ON] allows camera controls to be used to start and stop recording on the external recorder. For more information, see the section on “Recorders” ( 0 282) in the “Connecting to HDMI TVs and Recorders” chapter. 521 External Rec.
The Custom Settings Menu Menu Items and Defaults To view Custom Settings, select the A tab in the camera menus. Custom Settings are used to customize camera settings to suit individual preferences. The Custom Settings menu is divided into two levels.
The options in the Custom Settings menu are listed below, together with their default settings.
- b5: [Fine-tune optimal exposure] - [Matrix metering]: 0 - [Center-weighted metering]: 0 - [Spot metering]: 0 - [Highlight-weighted metering]: 0 c [Timers/AE lock] - c1: [Shutter-release button AE-L]: Off - c2: [Self-timer] - [Self-timer delay]: 10 s - [Number of shots]: 1 - [Interval between shots]: 0.
- d17: [Custom monitor shooting display] - [Display 1]: L (cannot be deselected) - [Display 2]: M - [Display 3]: M - [Display 4]: M - [Display 5]: M - d18: [Custom viewfinder shooting display] - [Display 1]: L (cannot be deselected) - [Display 2]: M - [Display 3]: M - [Display 4]: M e [Bracketing/flash] - e1: [Flash sync speed]: 1/200 s - e2: [Flash shutter speed]: 1/60 s - e3: [Exposure comp.
- [Fn button]: None [AE-L/AF-L button]: Protect [Playback button]: Resume shooting [DISP button]: Cycle info display [OK button]: Zoom on/off [Video record button]: None [Main command dial] - [Frame advance]: 1 frame - [Video playback]: 10 frames - [Sub-command dial] - [Frame advance]: 1 frame - [Video playback]: 10 s - [Lens Fn button]: None - [Lens Fn2 button]: None - f4: [Touch Fn] - [Enable/disable touch Fn]: OFF - [Assign touch Fn]: Move focus point - [Touch Fn area] - [“Wide” orientation]: Top right
- [AE-L/AF-L button]: AE/AF lock [Playback button]: Playback [DISP button]: Cycle live view info display [OK button]: Select center focus point [Shutter-release button]: None [Video record button]: Record videos [Command dials] - [Exposure setting]: A: 3Av/yE, M: 3Av/yTv - [Focus/AF-area mode selection]: 3t/ys - [Sub-command dial zoom role]: Exposure setting - [Lens Fn button]: AE/AF lock - [Lens Fn2 button]: AF-ON - [Lens Fn ring (counterclockwise)]: Recall focus position - [Lens Fn ring (clockwise)]: Re
- g13: [Grid type]: 3×3 - g14: [Brightness information display]: Histogram - g15: [Custom monitor shooting display] - [Display 1]: L (cannot be deselected) - [Display 2]: M - [Display 3]: M - [Display 4]: M - g16: [Custom viewfinder shooting display] - [Display 1]: L (cannot be deselected) - [Display 2]: M - [Display 3]: M - g17: [Red REC frame indicator]: ON 1 Items modified from default values are indicated by asterisks (“U”). 2 Available with compatible lenses only.
Reset Custom Settings G button UA Custom Settings menu Reset custom settings to their default values.
a1: AF-C Priority Selection G button UA Custom Settings menu Choose whether photos can be taken before the camera focuses when AF-C is selected. Option Description [Release] Photos can be taken whenever the shutter-release button is pressed (release priority). B [Focus + release] Priority is normally given to release, but if the subject is dark or low contrast and the camera is in continuous-release mode, priority will be given to focus for the first shot in each series.
a2: AF-S Priority Selection G button UA Custom Settings menu Choose whether photos can be taken before the camera focuses when AF-S is selected. Option G [Release] F [Focus] Description Photos can be taken whenever the shutter-release button is pressed (release priority). Photos can be taken only when the camera is in focus (focus priority).
a3: Focus Tracking with Lock-On G button UA Custom Settings menu Choose how quickly focus responds if something passes between the subject and the camera when AF‑C is selected for the focus mode. Blocked Shot AF Response Choose [5] ([Delayed]) to help maintain focus on your original subject. Choose [1] ([Quick]) to make it easier to shift focus to objects crossing your field of view.
a4: Focus Points Used G button UA Custom Settings menu Choose the number of focus points available for manual focus-point selection when an option other than [Auto-area AF] is selected for AF-area mode. Option 4 5 Description [All points] Every focus point available in the current AF-area mode can be selected. The number of points available varies with the AF-area mode.
a5: Store Points by Orientation G button UA Custom Settings menu Choose whether separate focus points can be selected for “wide” (landscape) orientation, for “tall” (portrait) orientation with the camera rotated 90° clockwise, and for “tall” orientation with the camera rotated 90° counterclockwise. Select [Off] to use the same focus point regardless of camera orientation.
Select [Focus point] to enable separate focus-point selection. To enable separate selection of both the focus point and AF-area mode, choose [Focus point and AF-area mode].
a6: AF Activation G button UA Custom Settings menu Choose whether the shutter-release button can be used to focus. Option Description [Shutter/AF‑ON] The camera focuses when the shutter-release button is pressed halfway. [AF‑ON only] The camera does not focus when the shutter-release button is pressed halfway. Highlighting [AF-ON only] and pressing 2 displays [Out-of-focus release] options.
a7: Focus Point Persistence G button UA Custom Settings menu Choose whether the focus point selected by the camera continues in use after you change AF-area modes using a control to which [AF-area mode] or [AF-area mode + AF-ON] has been assigned via Custom Setting f2 [Custom controls (shooting)]. This only applies if you change AF-area modes while focusing with the shutter-release button pressed halfway.
a8: Limit AF-Area Mode Selection G button UA Custom Settings menu Choose the AF-area modes that can be selected by rotating the sub-command dial while pressing a control to which [Focus mode/AF-area mode] has been assigned using Custom Setting f2 [Custom controls (shooting)]. Highlight options and press J or 2 to select (M) or deselect (U). Modes marked with a check (M) are available for selection via the sub-command dial. To complete the operation, press G.
a9: Focus Point Wrap-Around G button UA Custom Settings menu Choose whether focus-point selection “wraps around” from one edge of the display to another. If [ON] is selected, focus-point selection will “wrap around” from top to bottom, bottom to top, right to left, and left to right, so that, for example, pressing 2 when a focus point at the right edge of the display is highlighted selects the corresponding point at the left edge.
a10: Focus Point Display G button UA Custom Settings menu Choose from the focus point display options below. Manual Focus Mode Option Description [ON] The focus point is displayed at all times in manual focus mode. [OFF] The focus point is displayed only during focus-point selection. Dynamic-Area AF Assist Choose whether both the selected focus point and the surrounding focus points are displayed in dynamic-area AF mode.
AF-C In-Focus Display Choose whether the focus point changes color when the subject is in focus in focus mode AF‑C. Option Description [ON] The focus point is displayed in green when the camera judges that the subject is in focus. [OFF] The active focus point is displayed in red or yellow at all times, whether or not the camera is in focus. 3D-Tracking Focus Point Color The color of the focus point displayed when [3D-tracking] is selected for AF-area mode can be chosen from [White] and [Red].
a11: Built-in AF-Assist Illuminator G button UA Custom Settings menu Choose whether the built-in AF-assist illuminator lights to assist the focus operation in photo mode when lighting is poor. Option Description [ON] In photo mode, the illuminator will light as required when AF‑S is selected for focus mode. [OFF] The illuminator does not light to assist the focus operation. The camera may not be able to focus when lighting is poor.
a12: Focus Peaking G button UA Custom Settings menu When focus peaking is enabled in manual focus mode, objects that are in focus are indicated by colored outlines in the display. You can choose the color. Focus Peaking Display Select [ON] to enable focus peaking. Focus Peaking Sensitivity Choose focus peaking sensitivity from [3 (high sensitivity)], [2 (standard)], and [1 (low sensitivity)]. The higher the value, the greater the depth that will be shown as being in focus.
a13: Focus Point Selection Speed G button UA Custom Settings menu The speed at which the camera cycles through focus points while the multi selector is pressed can be chosen from [Low], [Normal], and [High].
a14: Manual Focus Ring in AF Mode G button UA Custom Settings menu This item is available with compatible lenses only. Use it to choose whether the lens focus ring can be used for manual focus in autofocus mode. Option [ON] [OFF] Description Autofocus can be over-ridden by rotating the lens focus ring (autofocus with manual override). The focus ring can be used for manual focus while the shutter-release button is pressed halfway.
b1: ISO Sensitivity Step Value G button UA Custom Settings menu Choose whether adjustments to ISO sensitivity made with the ISO sensitivity dial rotated to C are made in increments of ¹⁄₃ or 1 EV. If the value currently selected for ISO sensitivity is not available at the chosen setting, ISO sensitivity will be set to the nearest available value.
b2: Easy Exposure Compensation G button UA Custom Settings menu Choose whether exposure compensation can be adjusted using a command dial when the exposure compensation dial is rotated to C. Option [On (Auto reset)] [On] Description Exposure compensation can be adjusted using a command dial. Exposure compensation is reset when the camera turns off or the standby timer expires. Exposure compensation can be adjusted using a command dial.
b3: Matrix Metering Face Detection G button UA Custom Settings menu Choose whether exposure is adjusted for the faces of human portrait subjects detected by the camera when [Matrix metering] is selected. Option Description [ON] The camera adjusts exposure for faces. [OFF] Exposure is not adjusted according to whether faces have been detected.
b4: Center-Weighted Area G button UA Custom Settings menu When [Center-weighted metering] is selected, the camera assigns the greatest weight to an area in the center of the shooting display when setting exposure. Option Description R [Small] The camera assigns the greatest weight to an area equivalent to a circle 8 mm in diameter. S [Standard] The camera assigns the greatest weight to an area equivalent to a circle 12 mm in diameter.
b5: Fine-Tune Optimal Exposure G button UA Custom Settings menu Use this option to fine-tune the exposure value selected by the camera; exposure can be fine-tuned separately for each metering method. Exposure can be adjusted up for brighter exposures or down for darker exposures in the range +1 to –1 EV in steps of ¹⁄₆ EV. The default is zero.
c1: Shutter-Release Button AE-L G button UA Custom Settings menu Choose whether exposure locks when the shutter-release button is pressed. Option Description O [On (half press)] Pressing the shutter-release button halfway locks exposure. P [On (burst mode)] Exposure only locks while the shutter-release button is pressed all the way down. [Off] Pressing the shutter-release button does not lock exposure.
c2: Self-Timer G button UA Custom Settings menu Choose the length of the shutter release delay, the number of shots taken, and the interval between shots in self-timer mode. Option [Self-timer delay] [Number of shots] [Interval between shots] Description Choose the length of the shutter-release delay. Press 1 and 3 to choose the number of shots taken each time the shutterrelease button is pressed; choose from values of from 1 to 9. Choose the interval between shots when [Number of shots] is more than 1.
c3: Power Off Delay G button UA Custom Settings menu Choose how long the displays remain on, and how long the camera waits before returning from picture review to shooting mode, when no operations are performed. Longer power-off delays reduce battery endurance. Option [Playback] [Menus] Description Choose how long the monitor or viewfinder waits to turn off after playback starts. Choose how long the monitor or viewfinder waits to turn off after menus are displayed.
d1: CL Mode Shooting Speed G button UA Custom Settings menu Choose the frame advance rate for continuous low-speed release mode from options ranging from 1 to 7 fps.
d2: Maximum Shots per Burst G button UA Custom Settings menu The maximum number of shots that can be taken in a single burst in continuous release modes can be set to any value between 1 and 200. No limits are placed on the number of shots that can be taken in a single burst when: - shutter speed is set to 1 s or slower in mode S or M, or - [ON] is selected for [Silent mode] in the setup menu.
d3: Pre-Release Capture Options G button UA Custom Settings menu Choose the length of the burst recorded from the end of the memory buffer when, and the maximum length of the burst recorded after, the shutter-release is pressed all the way down in high-speed frame capture mode.
Option Description If an option other than [None] is selected, the camera will buffer frames [Pre-release burst] while the shutter-release button is pressed halfway, but only the frames added to the buffer in the final n seconds, where n is the value selected for [Pre-release burst], will be recorded to the memory card when the shutter-release button is pressed all the way down (“Pre-Release Capture”).
d4: Sync. Release Mode Options G button UA Custom Settings menu Choose whether the shutters on the remote cameras are synchronized with the shutter on the master camera when using the [Connect to other cameras] item in the network menu. For information on synchronized release using [Connect to other cameras] in the network menu, see the section on “Synchronized Release” ( 0 343) in the “Connecting to Other Cameras” chapter. 558 d4: Sync.
d5: Shutter Type G button UA Custom Settings menu Choose the type of shutter used for photographs. Option Description The camera chooses the shutter type automatically according to 6 [Auto] shutter speed. The electronic front-curtain shutter is used to reduce blur caused by camera shake at slow shutter speeds. 7 [Mechanical shutter] The camera uses the mechanical shutter for all photos. v [Electronic frontcurtain shutter] The camera uses the electronic front-curtain shutter for all photos.
d6: Extended Shutter Speeds (M) G button UA Custom Settings menu Extend the range of shutter speeds available in mode M; the slowest shutter speed available when [ON] is selected is 900 s (15 minutes). Extended shutter speeds can be used for pictures of the night sky and other long exposures. When [ON] is selected and shutter speed set to 60 s or slower, the control panel will show an exposure progress display.
d7: Limit Selectable Image Area G button UA Custom Settings menu Choose the options that can be accessed by rotating a command dial in the i menu or while pressing a control to which image area has been assigned. Highlight options and press J or 2 to select (M) or deselect (U). Modes marked with a check (M) are available for selection via the command dials. To complete the operation, press G.
d8: File Number Sequence G button UA Custom Settings menu Choose a file numbering option. Option Description [On] When a new folder is created or a new memory card is inserted in the camera, file numbering will continue from the last number used. This simplifies file management by minimizing the occurrence of duplicate file names when multiple cards are used. [Off] When a new folder is created or a new memory card is inserted, file numbering restarts from 0001.
D File Number Sequence If a picture is taken when the current folder contains a picture numbered 9999, a new folder will be created and file numbering will restart from 0001.
d9: View Mode (Photo Lv) G button UA Custom Settings menu Choose whether the camera adjusts the preview in the viewfinder or monitor to reflect how shooting settings will affect the hue and brightness of the final picture. Regardless of the option selected, the effects of camera settings are always visible in video mode. Option Description The effects of white balance, Picture Controls, exposure compensation, and other settings that affect color and exposure are visible in the shooting display.
Option Description The effects of changes to settings such as white balance, Picture Controls, and exposure compensation are not visible in the shooting display. Pressing 2 when [Adjust for ease of viewing] is highlighted displays [Auto] and W [Adjust for ease of viewing] [Custom] options. [Auto]: Color, brightness, and other settings are adjusted for ease of viewing, making it easier to frame pictures and perform other tasks.
d10: Starlight View (Photo Lv) G button UA Custom Settings menu Select [ON] to brighten the display for ease of viewing in dark environments (starlight view). Note that the display may become slightly jerky when starlight view is in effect.
d11: Warm Display Colors G button UA Custom Settings menu Use warmer colors with reduced brightness in the shooting, menu, and/or playback displays. This makes the displays easier to view with vision adapted to dark environments during astronomical photography and the like. Option Description Choose from the following options. [Warm display color options] [Warm color display brightness] [Mode 1]: Use warmer colors in the shooting, menu, and playback displays.
d12: View All in Continuous Mode G button UA Custom Settings menu If [OFF] is selected, the display will go blank during burst photography.
d13: Release Timing Indicator G button UA Custom Settings menu Choose how the display responds when the shutter is released in high-speed frame capture mode. Option Description [Type A] The display goes dark when the shutter is released. [Type B] Borders appear at the top, bottom, and sides of the frame when the shutter is released. [Type C] Borders appear at the sides of the frame when the shutter is released. [Off] A release timing indicator is not displayed when the shutter is released.
d14: Image Frame G button UA Custom Settings menu Select [OFF] to hide the white border around the shooting displays in the monitor and viewfinder.
d15: Grid Type G button UA Custom Settings menu Choose a framing grid for the shooting display. The selected grid can be displayed by placing a check (M) next to b in the list for Custom Setting d17 [Custom monitor shooting display] ( 0 575) or d18 [Custom viewfinder shooting display] ( 0 577).
d16: Virtual Horizon Type G button UA Custom Settings menu Choose a virtual horizon for the shooting display. The selected virtual horizon can be displayed by placing a check (M) next to D in the list for Custom Setting d17 [Custom monitor shooting display] ( 0 575) or d18 [Custom viewfinder shooting display] ( 0 577). [Type A]: A large indicator showing roll and pitch fills the display. [Type B]: A roll indicator appears at the bottom of the display and a pitch indicator at its right edge.
Roll Camera rotated clockwise Camera rotated counterclockwise Option [Type A] [Type B] 573 d16: Virtual Horizon Type
Pitch Camera tilted forward Camera tilted back Option [Type A] [Type B] D The Virtual Horizon Display Note that the display may not be accurate when the camera is tilted at a sharp angle forward or back. The camera will not display the virtual horizon or pitch and roll indicators when held at angles at which tilt cannot be measured.
d17: Custom Monitor Shooting Display G button UA Custom Settings menu Choose the monitor displays accessible by pressing the DISP button during shooting. Highlight items ([Display 2] through [Display 5]) and press J to select (M) or deselect (U). Only displays marked with a check (M) can be accessed by pressing the DISP button during shooting. [Display 1] cannot be deselected. To choose indicators that appear in displays [Display 1] through [Display 4], highlight the corresponding option and press 2.
Option G [Center-weighted area] Description Add an 8 or 12 mm circle to the center of the shooting display whenever [Center-weighted metering] is selected for [Metering] in the photo shooting menu. The size of the circle varies with the option selected for Custom Setting b4 [Center-weighted area]. The circle is not displayed when [Average] is selected for Custom Setting b4 [Center-weighted area]. [Display 5] consists solely of the information display and cannot be customized.
d18: Custom Viewfinder Shooting Display G button UA Custom Settings menu Choose the viewfinder displays accessible by pressing the DISP button during shooting. Highlight items ([Display 2] through [Display 4]) and press J to select (M) or deselect (U). Only displays marked with a check (M) can be accessed by pressing the DISP button during shooting. [Display 1] cannot be deselected. To choose indicators that appear in displays [Display 1] through [Display 4], highlight the corresponding option and press 2.
e1: Flash Sync Speed G button UA Custom Settings menu Choose the flash sync speed. Option Description [1/200 s (Auto FP)] Flash sync speed is set to ¹⁄₂₀₀ s. With compatible flash units, auto FP highspeed sync will automatically be enabled at shutter speeds faster than ¹⁄₂₀₀ s. In modes P and A, auto FP high-speed sync will be activated if the actual shutter speed is faster than ¹⁄₂₀₀ s.
D Caution: Auto FP High-Speed Sync Depending on the shutter speed, horizontal lines may appear in pictures taken using auto FP highspeed sync when [1/200 s (Auto FP)] is selected. This effect can be mitigated by: choosing a slower shutter speed or adjusting flash output. Tip: Choosing a Fixed Flash Sync Speed To fix shutter speed at the value selected for Custom Setting e1 [Flash sync speed] in modes S and M, rotate the shutter speed dial to X.
e2: Flash Shutter Speed G button UA Custom Settings menu Choose the slowest shutter speed available with a flash in mode P or A. Regardless of the setting chosen for Custom Setting e2 [Flash shutter speed], shutter speeds can be as slow as 30 s in modes S and M or at flash settings of slow sync, slow rear-curtain sync, or red-eye reduction with slow sync.
e3: Exposure Comp. for Flash G button UA Custom Settings menu Choose how the camera adjusts flash level when exposure compensation is used. Option YE E [Entire frame] [Background only] Description The camera adjusts both the flash level and exposure. This changes the exposure for the entire frame. Exposure compensation is adjusted for the background only. 581 e3: Exposure Comp.
e4: Auto c ISO Sensitivity Control G button UA Custom Settings menu Choose how the camera adjusts flash level when auto ISO sensitivity control is enabled. Option Description e [Subject and background] The camera takes both the main subject and background lighting into account when adjusting ISO sensitivity. f [Subject only] ISO sensitivity is adjusted only to ensure that the main subject is correctly exposed.
e5: Modeling Flash G button UA Custom Settings menu If [ON] is selected when the camera is used with an optional flash unit that supports the Nikon Creative Lighting system, pressing a control to which [Preview] has been assigned using Custom Setting f2 [Custom controls (shooting)] will emit a modeling flash.
e6: Auto Bracketing (Mode M) G button UA Custom Settings menu The settings affected when bracketing is enabled in mode M and [OFF] is selected for [ISO sensitivity settings] > [Auto ISO sensitivity control] in the photo shooting menu are determined by the options selected for [Auto bracketing] > [Auto bracketing set] in the photo shooting menu and the option chosen for Custom Setting e6 [Auto bracketing (mode M)].
e7: Bracketing Order G button UA Custom Settings menu Choose the order in which the shots in the bracketing program are taken. Option Description H [MTR > under > over] The unmodified shot is taken first, followed by the shot with the lowest value, followed by the shot with the highest value. I [Under > MTR > over] Shooting proceeds in order from the lowest to the highest value.
e8: Flash Burst Priority G button UA Custom Settings menu Choose whether optional flash units emit monitor pre-flashes before each shot during burst photography in high- or low-speed continuous release mode. Option c q [Prioritize frame advance rate] [Prioritize precise flash control] Description The flash unit emits a monitor pre-flash before the first shot in each sequence and locks output at the metered value for the remaining shots.
f1: Customize i Menu G button UA Custom Settings menu Choose the items listed in the i menu displayed when the i button is pressed in photo mode. Highlight a position in the i menu, press J, and select the desired item. The following items can be assigned to the i menu.
0 Option [Metering] 0 411 [Flash mode] 0 414 [Flash compensation] 0 415 s [Focus mode] 0 114 7 [AF-area mode/subj.
0 Option W [Focus peaking] 3 [Monitor/viewfinder brightness] 0 543 0 674, 0 676 v [Warm display colors] 0 567 u [Airplane mode] 0 724 W [Wireless remote connection (ML-L7)] 0 729 View Memory Card Info View the slot currently selected as the destination for new pictures and the options used to record pictures when two memory cards are inserted. This option can be used to view but not to change the option selected.
Split-Screen Display Zoom If [Split-screen display zoom] is assigned to the i menu, you can select [Split-screen display zoom] to simultaneously zoom in on two areas that are aligned horizontally but are in different parts of the frame (split-screen display zoom). The locations of the areas are indicated by the two frames (r) in the navigation window in the bottom right corner of the display.
f2: Custom Controls (Shooting) G button UA Custom Settings menu Choose the operations performed in photo mode using lens rings and camera buttons and command dials. Choose the roles played by the controls below. Highlight the desired control and press J.
The roles that can be assigned are listed below. The roles available vary with the control. Role Description [Select center focus point] Pressing the control selects the center focus point. F [Save focus position] Holding the control saves the current focus position. The saved position can be restored using a control to which [Recall focus position] has been assigned (“memory recall”).
Role E [AE lock (Hold)] Description Exposure locks when the control is pressed. Exposure lock does not end when the shutter is released. Exposure remains locked until the control is pressed a second time or the standby timer expires. If [Auto] or [Natural light auto] is selected for white balance, N [AWB lock (hold)] white balance will lock when the control is pressed (whitebalance lock). White-balance lock does not end when the shutter is released.
Role Description While the control is pressed, the shooting display will show how q [Preview] L [Matrix metering] Holding the control selects matrix metering. The setting previously in effect is restored when the control is released. M [Center-weighted metering] Holding the control selects center-weighted metering. The setting previously in effect is restored when the control is released. N [Spot metering] Holding the control selects spot metering.
Role Description The chosen control can be used to toggle between remote release and master or synchronized release when [Synchronized release] is selected for [Connect to other cameras] in the network menu. The options available depend on the setting chosen for Custom Setting d4 [Sync. release mode options]. The following options are available when [Sync] is selected for [Sync. release mode options]: - [Master release only] (c): Keep the control pressed to c [Sync.
Role Description Press the control to zoom the display in on the area around the p [Zoom on/off] D [Virtual horizon] again to hide the display. The display type can be selected using Custom Setting d16 [Virtual horizon type]. k [Starlight view (photo Lv)] Press the control to toggle starlight view on. Press again to end starlight view.
Role E [Exposure compensation] Description When the exposure compensation dial is rotated to C, exposure compensation can be adjusted either by holding the control and rotating a command dial or by rotating the lens control ring. When the ISO sensitivity dial is rotated to C, ISO sensitivity can be adjusted either by holding the control and rotating the main command dial or by rotating the lens control ring.
Role Description Hold the control and rotate the main command dial to choose z [Focus mode/AFarea mode] t [Auto bracketing] $ [Multiple exposure] Press the control and rotate the main command dial to choose the mode and the sub-command dial to choose the number of shots. 2 [HDR overlay] Press the control and rotate the main command dial to choose the mode and the sub-command dial to adjust HDR strength.
Role q [Aperture] t [Aperture (open)] q [Aperture (close)] Description Rotate the lens control ring to adjust aperture. Rotate the lens Fn ring counterclockwise to widen aperture. [None] This option is enabled automatically when [Aperture (close)] is selected for [Lens Fn ring (clockwise)]. Rotate the lens Fn ring clockwise to narrow aperture. This option is enabled automatically when [Aperture (open)] is selected for [Lens Fn ring (counterclockwise)]. The control has no effect.
Command Dials The following roles can be assigned to the command dials. To view options, highlight items and press 2. Role Description [Exposure setting] Reverse the roles of the main and sub-command dials in selected modes. Press 4 or 2 to highlight a mode and 1 or 3 to switch roles.
Saving and Recalling Focus Positions You can save the current focus position by pressing and holding a custom control to which you have assigned [Save focus position]. The saved focus position can be instantly restored by pressing a custom control assigned [Recall focus position] (“memory recall”). You may find this useful if you frequently return to subjects at a fixed focus distance. [Recall focus position] can be assigned to multiple controls.
3 Highlight [Save to all] and press J. 4 Focus on the desired subject in the shooting display and press and hold the control to which [Save focus position] is assigned. A F icon will appear in the shooting display if the operation is successful. 5 Press any of the controls to which [Recall focus position] was assigned in Step 1. The saved focus position will be restored.
“Save Individually” 1 Assign [Recall focus position] to multiple controls. 2 Select another control in the custom control list and, when prompted to choose a role, highlight [Save focus position] and press 2. Save options will be displayed. 3 Highlight [Save individually] and press J. 4 Focus on the desired subject in the shooting display and press and hold the control to which [Save focus position] is assigned. A F icon will flash in the shooting display.
5 Press the button you intend to use for recall of the focus position saved in Step 4. Of the controls to which [Recall focus position] was assigned in Step 1, press the control you intend to use for recall of the focus position saved in Step 4. A message will appear in the shooting display if the operation is successful. Repeat Steps 4 to 5 to save additional focus positions to the other controls to which [Recall focus position] is assigned. 6 Press the control for the desired focus position.
f3: Custom Controls (Playback) G button UA Custom Settings menu Choose the operations performed during playback using camera buttons and command dials. Choose the roles played by the controls below. Highlight the desired control and press J.
The roles that can be assigned to these controls are listed below. The roles available vary with the control. g Role Description [Protect] Press the control to toggle protection for the current picture on or off. Press the control to zoom the display in on the area around the current focus point (the zoom ratio is selected in advance). Press p [Zoom on/off] again to cancel zoom. To choose the zoom ratio, highlight [Zoom on/off] and press 2.
Role Description n [Thumbnail on/off] Press the control to toggle between full-frame and 4-, 9-, or 72-frame thumbnail playback. o [View histograms] A histogram is displayed while the control is pressed. The histogram display is available in both full-frame and thumbnail playback. W [Choose slot and folder] Press the control to display the [Choose slot and folder] dialog, where you can then choose a slot and folder for playback.
Command Dials The following roles can be assigned to the command dials. To view options, highlight items and press 2. Frame Advance Choose the number of frames that can be skipped by rotating the command dials during full-frame playback. Option Description [1 frame] Skip forward or back a frame at a time. [10 frames] Skip forward or back 10 frames at a time. [50 frames] Skip forward or back 50 frames at a time. c [Rating] Skip to the next or previous picture with the selected rating.
Video Playback Choose the roles played by the command dials during video playback. Option Description [1 frame] Advance or rewind a frame at a time. [5 frames] Advance or rewind 5 frames at a time. [10 frames] Advance or rewind 10 frames at a time. [2 s] Skip forward or back 2 s at a time. [5 s] Skip forward or back 5 s at a time. [10 s] Skip forward or back 10 s at a time. [First/last frame] Skip to the first or last frame.
f4: Touch Fn G button UA Custom Settings menu Use monitor touch controls to adjust settings while framing pictures in the viewfinder. Touch Fn is available only when the monitor is in storage position with the screen facing outward. Enable/Disable Touch Fn Select [ON] to enable touch Fn.
Assign Touch Fn The roles that can be assigned to touch Fn are listed below. Role Description The focus point can be positioned by sliding a finger over the touch Fn area. [Move focus point] You can also position the focus point by double-tapping the desired location in the monitor. [Switch eyes] When the camera detects the eyes of a human or animal portrait subject, you can choose the eye used for focus by tapping the touch Fn area in the monitor.
f5: Focus-Point Lock G button UA Custom Settings menu Select [ON] to lock focus-point selection on the currently-selected focus point. Focus point lock does not apply when [Auto-area AF] is selected for AF-area mode. When [3D-tracking] is selected, the focus point will track subject motion while the shutter-release button is pressed halfway.
f6: Reverse Dial Rotation G button UA Custom Settings menu Reverse the direction of rotation of the command dials for selected operations. Highlight [Exposure compensation] or [Shutter speed/aperture] and press 2 to select (M) or deselect (U). Press G to save changes and exit.
f7: Release Button to Use Dial G button UA Custom Settings menu Selecting [ON] allows adjustments that are normally made by holding a button and rotating a command dial to be made by rotating the command dial after the button is released. This ends when the button is pressed again, the shutter-release button is pressed halfway, or the standby timer expires. [Release button to use dial] applies to the Fn button.
f8: Reverse Indicators G button UA Custom Settings menu Choose whether certain horizontal indicators in the shooting and other displays are shown with negative values on the left and positive values on the right, or with positive values on the left and negative values on the right. Option Description V The indicators are displayed with positive values on the left and negative values on the right. W The indicators are displayed with negative values on the left and positive values on the right.
f9: Reverse Ring for Focus G button UA Custom Settings menu Select [ON] to reverse the direction of rotation for the focus or control rings on Z mount lenses during manual focus. This option does not support: - certain Z mount lenses that can only be focused manually, or - F mount lenses connected via an FTZ II/FTZ mount adapter.
f10: Focus Ring Rotation Range G button UA Custom Settings menu Choose how far the focus or control rings on Z mount lenses must be rotated to go all the way from the minimum focus distance to infinity. Option [Non-linear] Description The focus distance changes by a large amount when the ring is rotated rapidly and by a small amount when the ring is rotated slowly, without regard to how far the ring is rotated.
f11: Control Ring Response G button UA Custom Settings menu Choose how responsive the lens control ring is when assigned [Aperture], [Power aperture], [Exposure compensation], or [ISO sensitivity] using Custom Setting f2 [Custom controls (shooting)] or g2 [Custom controls].
f12: Switch Focus/Control Ring Roles G button UA Custom Settings menu If [ON] is selected, the focus ring will perform the role currently assigned to the control ring using Custom Setting f2 [Custom controls (shooting)] or g2 [Custom controls]. The control ring functions solely in the [Focus (M/A)] role when [ON] is selected. This option applies only to compatible lenses.
f13: Power Zoom (PZ) Button Options G button UA Custom Settings menu Choose whether the X and W (Q) buttons can be used for power zoom during still photography when a power zoom lens is attached. Option Description [Use x/w buttons] Selecting [ON] allows the X and W (Q) buttons to be used for power zoom. [Power zoom speed] Choose the speed at which power zoom lenses can be zoomed in and out using the buttons.
f14: Full-Frame Playback Flicks G button UA Custom Settings menu Choose the role assigned to the flick up and down or flick left and right gestures during full-frame playback. Flick Up/Flick Down Choose the operation performed by flicking up or down. Option Description [Rating] Assign the current picture a pre-selected rating. The rating can be chosen by pressing 2. K [Select for upload to computer] Mark the current picture for priority upload to a computer.
Flick Advance Direction Choose the gesture used for frame advance. Option Description S [Left←Right] Flick from right to left to view the next picture. T [Left→Right] Flick from left to right to view the next picture.
g1: Customize i Menu G button UA Custom Settings menu Choose the items listed in the i menu displayed when the i button is pressed in video mode. Highlight a position in the i menu, press J, and select the desired item. The following items can be assigned to the i menu.
0 Option H [Microphone sensitivity] 0 513 5 [Attenuator] 0 514 6 [Frequency response] 0 515 7 [Wind noise reduction] 0 516 8 [Headphone volume] 0 518 L [Silent mode] 0 704 w [Custom controls] 0 626 W [Focus peaking] 0 543 9 [Zebra pattern] 0 640 3 [Monitor/viewfinder brightness] 0 674, 0 676 8 [Multi-selector power aperture] 0 625 9 [Multi selector exposure comp.
Multi-Selector Power Aperture Choose whether the multi selector can be used for power aperture. When [Enable] is selected, holding 1 widens the aperture. Holding 3 narrows the aperture. Multi Selector Exposure Comp. Choose whether the multi selector can be used to adjust exposure compensation. Selecting [Enable] allows exposure compensation to be set by pressing 1 or 3 when the exposure compensation dial is rotated to C. View Video Info View video recording settings.
g2: Custom Controls G button UA Custom Settings menu Choose the operations performed in video mode using lens rings and camera buttons and command dials. Choose the roles played by the controls below. Highlight the desired control and press J.
Option l [Lens control ring] The roles that can be assigned are listed below. The roles available vary with the control. Role Description [Select center focus point] Pressing the control selects the center focus point. F [Save focus position] Holding the control saves the current focus position. The saved position can be restored using a control to which [Recall focus position] has been assigned (“memory recall”).
Role E [AE lock (Hold)] Description Exposure locks when the control is pressed. Exposure lock does not end when recording begins. Exposure remains locked until the control is pressed a second time or the standby timer expires. If [Auto] or [Natural light auto] is selected for white balance, N [AWB lock (hold)] white balance will lock when the control is pressed (whitebalance lock). White-balance lock does not end when recording begins.
Role Description Press the control to zoom the display in on the area around the p [Zoom on/off] D [Virtual horizon] Press the control to enable the virtual horizon display. Press again to hide the display. The display type can be selected using Custom Setting d16 [Virtual horizon type]. W [Focus peaking display] Press the control once to enable focus peaking when MF is selected for focus mode. Press again to end focus peaking.
Role 9 [ISO sensitivity] Description When the ISO sensitivity dial is rotated to C, ISO sensitivity can be adjusted either by holding the control and rotating a command dial or by rotating the lens control ring. m [White balance] Hold the control and rotate the main command dial to adjust white balance for videos. Some options offer sub-options that can be selected by rotating the sub-command dial. h [Set Picture Control] Press the control and rotate a command dial to choose a Picture Control.
D Power Aperture Power aperture is available only in modes A and M. The display may flicker while aperture is adjusted. Command Dials The following roles can be assigned to the command dials. To view options, highlight items and press 2. Role Description [Exposure setting] Reverse the roles of the main and sub-command dials in selected modes. Press 4 or 2 to highlight a mode and 1 or 3 to switch roles.
g3: Focus-Point Lock G button UA Custom Settings menu Select [ON] to lock focus-point selection on the currently-selected focus point. Focus point lock does not apply when [Auto-area AF] is selected for AF-area mode. When [Subject-tracking AF] is selected, the focus point will track subject motion.
g4: Limit AF-Area Mode Selection G button UA Custom Settings menu Choose the AF-area modes that can be selected by rotating the sub-command dial while pressing a control to which [Focus mode/AF-area mode] has been assigned using Custom Setting g2 [Custom controls]. Highlight options and press J or 2 to select (M) or deselect (U). Modes marked with a check (M) are available for selection via the sub-command dial. To complete the operation, press G.
g5: AF Speed G button UA Custom Settings menu Choose the focus speed for video mode. Use [When to apply] to choose when the selected option applies. Option Description D [Always] The camera focuses at the selected speed at all times in video mode. E [Only while recording] Focus is adjusted at the selected speed only while video recording is in progress. At other times, the camera focuses as quickly as possible.
g6: AF Tracking Sensitivity G button UA Custom Settings menu The AF tracking sensitivity for video mode can be set to values of from 1 to 7. Choose [7] ([Low]) to help maintain focus on your original subject. If the subject leaves the selected focus point when [1] ([High]) is selected, the camera will respond by quickly shifting focus to a new subject in the same area.
g7: Power Zoom (PZ) Button Options G button UA Custom Settings menu Choose whether the X and W (Q) buttons can be used for power zoom during video recording when a power zoom lens is attached. Option Description [Use x/w buttons] Selecting [ON] allows the X and W (Q) buttons to be used for power zoom.
g8: Fine ISO Control (Mode M) G button UA Custom Settings menu Selecting [On (1/6 EV)] allows ISO sensitivity for videos to be adjusted in increments of ¹⁄₆ EV in mode M. This option takes effect only when ISO sensitivity is adjusted via [ISO sensitivity settings] > [ISO sensitivity (mode M)] in the video recording menu with the ISO sensitivity dial rotated to C. Sensitivity can be set to values of from ISO 100 to 51200 in increments of ¹⁄₆ EV.
g9: Extended Shutter Speeds (S/M) G button UA Custom Settings menu Select [ON] for access to a range of slower shutter speeds in modes S and M. When [OFF] is selected, the minimum shutter speed varies with frame rate as follows. - 120p: ¹⁄₁₂₅ s - 100p: ¹⁄₁₀₀ s - 60p: ¹⁄₆₀ s - 50p: ¹⁄₅₀ s - 30p: ¹⁄₃₀ s - 25p: ¹⁄₂₅ s - 24p: ¹⁄₂₅ s When [ON] is selected, the minimum shutter speeds for frame rates of 60p to 24p drop to ¹⁄₄ s. Those for 120p and 100p do not change.
g10: View Assist G button UA Custom Settings menu Choose [ON] for a live preview of video footage recorded with [N‑Log] selected for video tone mode, but note that the colors in the preview are simplified for enhanced contrast. Colors in the actual recorded footage are unaffected. Contrast is also enhanced when N‑Log footage is viewed on the camera.
g11: Zebra Pattern G button UA Custom Settings menu Choose whether a zebra pattern is used to indicate selected tone ranges in video mode. Pattern Tone Range Choose the tone range shown by the zebra pattern from [Highlights] or [Mid-tones], or select [Zebra pattern off] to turn the zebra pattern off. Highlights and mid-tones can be defined using [Highlight threshold] and [Mid-tone range], respectively. Pattern To enable the zebra display, select [Pattern 1] or [Pattern 2].
Mid-tone Range Choose the brightness needed to trigger the zebra display when [Mid-tones] is selected for [Pattern tone range]. The mid-tone range is defined as a brightness [Value] and [Range] of brightnesses centered around the selected value. Press 4 or 2 to highlight items and press 1 or 3 to change. D Zebra Pattern If both the zebra display and focus peaking are enabled in manual focus mode, only focus peaking will take effect.
g12: Limit Zebra Pattern Tone Range G button UA Custom Settings menu Choose the tone ranges accessible via controls to which [Pattern tone range] is assigned. Option Description [Highlights] The control can be used to cycle between [Highlights] and [Zebra pattern off]. [Mid-tones] The control can be used to cycle between [Mid-tones] and [Zebra pattern off]. [No restrictions] The control can be used to cycle through [Highlights], [Mid-tones], and [Zebra pattern off].
g13: Grid Type G button UA Custom Settings menu Choose a framing grid for video mode. The selected grid can be displayed by placing a check (M) next to b in the list for Custom Setting g15 [Custom monitor shooting display] or g16 [Custom viewfinder shooting display].
g14: Brightness Information Display G button UA Custom Settings menu Choose how the camera displays brightness information in video mode. Brightness information of the selected type can be displayed by placing a check (M) next to E in the list for Custom Setting g15 [Custom monitor shooting display] or g16 [Custom viewfinder shooting display]. Option Description Enable the RGB histogram. [Histogram] [Wave-form monitor] The camera displays a wave-form monitor.
g15: Custom Monitor Shooting Display G button UA Custom Settings menu Choose the monitor displays accessible by pressing the DISP button in video mode. Highlight items ([Display 2] through [Display 4]) and press J to select (M) or deselect (U). Only displays marked with a check (M) can be accessed by pressing the DISP button during shooting. [Display 1] cannot be deselected. To choose indicators that appear in displays [Display 1] through [Display 4], highlight the corresponding option and press 2.
Option F [Center indicator] Description Display crosshairs at the center of the frame. To complete the operation, press G.
g16: Custom Viewfinder Shooting Display G button UA Custom Settings menu Choose the viewfinder displays accessible by pressing the DISP button in video mode. Highlight items ([Display 2] or [Display 3]) and press J to select (M) or deselect (U). Only displays marked with a check (M) can be accessed by pressing the DISP button during shooting. [Display 1] cannot be deselected. To choose indicators that appear in displays [Display 1] through [Display 3], highlight the corresponding option and press 2.
g17: Red REC Frame Indicator G button UA Custom Settings menu If [ON] is selected, a red border will appear around the shooting display while video recording is in progress. This helps prevent missed shots by alerting you when recording is in progress.
The Playback Menu Menu Items and Defaults To display the playback menu, select the D (playback menu) tab in the camera menus. The options in the playback menu are listed below, together with their default settings.
- [Rating]: U - [Select for upload to computer]: U - [Select for upload (FTP)]: U - [Voice memo]: U - [Retouched pictures]: U [Series playback] - [Auto series playback]: OFF - [List series as single thumbnails]: OFF [Picture review]: Off [After delete]: Show next [After burst, show]: Last picture in burst [Auto-rotate pictures]: ON [Copy image(s)]: — 650 Menu Items and Defaults
Delete G button U D playback menu Delete multiple pictures. For more information, see “Deleting Multiple Pictures” ( 0 235). Option Description Q [Selected pictures] Delete selected pictures. d [Candidates for deletion] Delete pictures rated d (candidate for deletion). [Pictures shot on selected dates] Delete all pictures taken on selected dates. [All pictures] Delete all pictures in the folder currently selected for [Playback folder] in the playback menu.
Playback Folder G button U D playback menu Choose a folder for playback. Option (Folder name) Description Pictures in all folders with the selected name will be visible during playback. Folders can be renamed using the [Storage folder] > [Rename] option in the photo shooting menu. [All] Pictures in all folders will be visible during playback. [Current] Only pictures in the current folder will be visible during playback.
Playback Display Options G button U D playback menu Choose display options for full-frame playback. Highlight options and press 2 to select (M) or deselect (U). To complete the operation, press G. Option [Focus point] Description Select (M) this option to view the location of the focus point used when the picture was taken.
Option Description [Basic shooting data] [Flash data] [Picture Control/HLG data] The selected (M) options are included in the full-frame playback [Shooting [Other shooting data] data] display.
Delete Pictures from Both Slots G button U D playback menu Choose whether deleting a copy of a picture recorded to both memory cards with an option other than [Overflow] selected for [Secondary slot function] in the photo shooting menu also deletes the remaining copy. Option Description [Yes (confirmation required)] Before deleting one copy, you will be prompted to choose whether to delete the other. To choose the option highlighted by default, press 2.
Dual-Format Recording PB Slot G button U D playback menu Choose the slot from which dual-format pictures recorded with [RAW primary - JPEG secondary], [JPEG primary - JPEG secondary], [RAW primary - HEIF secondary], or [HEIF primary - HEIF secondary] selected for [Secondary slot function] in the photo shooting menu are played back.
Filtered Playback Criteria G button U D playback menu Choose the criteria used to choose the pictures displayed during filtered playback ( 0 229).
Series Playback G button U D playback menu Choose options for viewing bursts. Auto Series Playback If [ON] is selected, the remaining pictures will play back automatically after the first picture in the burst has been displayed full frame for a few seconds. Playback ends when the last picture in the burst is displayed. List Series as Single Thumbnails When [ON] is selected, only the first shot in each burst will appear in the thumbnail list.
Picture Review G button U D playback menu Choose whether pictures are automatically displayed immediately after shooting. Option Description Pictures appear in the currently-selected display (monitor or viewfinder) as they are taken. [On] When [Prioritize viewfinder (2)] is selected for monitor mode, the most recent picture will be displayed in the monitor when you take your eye from the viewfinder. [On (monitor only)] Pictures are displayed after shooting only when the monitor is used to frame shots.
After Delete G button U D playback menu Choose the picture displayed after an image is deleted. Option S [Show next] Description The following picture is displayed. If the deleted picture was the last picture, the preceding picture will be displayed. T U [Show previous] The preceding picture is displayed. If the deleted picture was the first picture, the next picture will be displayed.
After Burst, Show G button U D playback menu Choose whether the photo displayed immediately after a burst of shots is taken in continuous mode is the first or last shot in the burst. This option takes effect only when [Off] is selected for [Picture review] in the playback menu. 1 DSC_0001.jpg DSC_0002.jpg DSC_0003.jpg DSC_0004.jpg DSC_0014.jpg 2 1 2 3 DSC_0015.
Auto-Rotate Pictures G button U D playback menu If [ON] is selected, the playback display will automatically rotate to match camera orientation, with the result that “tall” pictures will be rotated to display in “tall” orientation when the camera is held in ”wide” orientation and “wide” pictures will be rotated to display in “wide” orientation when the camera is held in “tall” orientation.
Copy Image(s) G button U D playback menu Copy pictures from one memory card to another when two memory cards are inserted. Option Description [Select source] Choose the card from which pictures will be copied. [Select picture(s)] Select pictures to be copied. [Select destination folder] Select the destination folder on the remaining card (the card not selected for [Select source]). [Copy picture(s)?] Copy the pictures. Copying Pictures 1 Choose [Select source].
3 Choose [Select picture(s)]. Highlight [Select picture(s)] and press 2 to view the [Select picture(s)] display. 4 Select the source folder. Highlight the folder containing the pictures to be copied and press 2 to display the [Images selected by default] menu. To copy all pictures from the card in the selected slot, highlight [All pictures in slot], press J, and proceed to Step 10. 5 Make the initial selection. Choose the pictures that will be selected by default.
6 Select additional pictures. Highlight pictures and press the W (Q) button to select; selected pictures are marked with a check ( ). To remove the check ( ) and deselect the current picture, press the W (Q) button again. To view the highlighted picture full screen, press and hold the X button. After confirming that all the pictures you want to copy have marks, press J to return to the [Copy image(s)] menu. 7 Choose [Select destination folder].
8 Choose a destination folder. Highlight one of the following options and press 2. Option [Select folder by number] Description Enter the number of the destination folder ( 0 374). If a folder with the selected number does not already exist, a new folder will be created. Choose the destination folder from a list of existing folders. [Select folder from list] 9 Select the folder.
11 Choose [Yes]. The camera will display the message “Copy?” together with the number of pictures that will be copied. Highlight [Yes] and press J to copy the selected pictures. Press J again to exit when copying is complete. D Cautions: Copying Pictures Pictures will not be copied if there is insufficient space on the destination card. If the destination folder contains a file with the same name as one of the pictures to be copied, a confirmation dialog will be displayed.
The Setup Menu Menu Items and Defaults To view the setup menu, select the B tab in the camera menus. The options in the setup menu are listed below, together with their default settings.
- [Lens number]: 1 - [Focal length (mm)]: – – - [Maximum aperture]: – – [Save focus position]: OFF [Save zoom position (PZ lenses)]: OFF [Auto temperature cutout]: Standard [Clean image sensor] - [Automatic cleaning]: Clean at shutdown [Image Dust Off ref photo]: — [Pixel mapping]: — [Image comment] - [Attach comment]: OFF [Copyright information] - [Attach copyright information]: OFF [IPTC] - [Edit/save]: — - [Delete]: — - [Auto embed during shooting]: Off - [Load/save]: — [Voice memo options] - [Voice memo
[Reset all settings]: — [Firmware version]: — 670 Menu Items and Defaults
Format Memory Card G button U B setup menu Format memory cards. Memory cards that have been formatted in a computer or another camera should be reformatted using this option before use. To begin formatting, choose a memory card slot and select [Yes]. Note that formatting permanently deletes all pictures and other data on the card. Before formatting, be sure to make backup copies as required.
Language G button U B setup menu Choose a language for camera menus and messages. The languages available vary with the country or region in which the camera was originally purchased.
Time Zone and Date G button U B setup menu Change time zones and set the camera clock. We recommend that the camera clock be adjusted regularly. Option [Time zone] Description Choose a time zone. The time selected for [Date and time] is automatically adjusted for the new time zone. [Date and time] Set the camera clock to the current time in the selected [Time zone]. [Date format] Choose the order in which the day, month, and year are displayed.
Monitor Brightness G button U B setup menu Press 1 or 3 to adjust monitor brightness. Choose higher values for increased brightness, lower values for reduced brightness. [Monitor brightness] can only be adjusted when the monitor is the active display. It cannot be adjusted when [Viewfinder only] is selected for monitor mode or when your eye is to the viewfinder. Higher values increase the drain on the battery.
Monitor Color Balance G button U B setup menu Adjust monitor color balance to your taste. [Monitor color balance] can only be adjusted when the monitor is the active display. It cannot be adjusted when [Viewfinder only] is selected for monitor mode or when your eye is to the viewfinder. Color balance is adjusted using the multi selector. Press 1, 3, 4, or 2 to adjust color balance as shown below. Press J to save changes.
Viewfinder Brightness G button U B setup menu Adjust viewfinder brightness. [Viewfinder brightness] can only be adjusted when the viewfinder is the active display. It cannot be adjusted when the monitor is on or when [Monitor only] is selected for monitor mode. Option [Auto] [Manual] Description Viewfinder brightness is adjusted automatically in response to lighting conditions. Press 1 or 3 to adjust brightness manually. Choose higher values for increased brightness, lower values for reduced brightness.
Viewfinder Color Balance G button U B setup menu Adjust viewfinder color balance to your taste. [Viewfinder color balance] can only be adjusted when the viewfinder is the active display. It cannot be adjusted when the monitor is on or when [Monitor only] is selected for monitor mode. Otherwise the procedure is the same as for [Monitor color balance] ( 0 675).
Finder Display Size (Photo Lv) G button U B setup menu Choose a magnification for the viewfinder display from [Standard] and [Small]. Selecting [Small] makes it easier to see the entire subject.
Limit Monitor Mode Selection G button U B setup menu Choose the monitor modes that can be selected using the M button. Highlight options and press J or 2 to select (M) or deselect (U). Options marked with a check (M) are available for selection. To complete the operation, press G.
Auto Rotate Info Display G button U B setup menu When [ON] is selected, the indicators in the shooting and playback displays will automatically be rotated to match camera orientation.
AF Fine-Tuning Options G button U B setup menu Fine-tune focus for the current lens. Use only as required. We recommend that you perform fine-tuning at a focus distance you use frequently. If you perform focus-tuning at a short focus distance, for example, you may find it less effective at longer distances. Option [AF fine-tune] Description Select [ON] to turn fine-tuning on. Fine-tune focus for the current lens. Press 1 or 3 to highlight items and press 4 or 2 to choose from values between +20 and −20.
Option [Choose value for current Description Choose from multiple fine-tuning values saved for lenses of the same type. lens] D Deleting Saved Values To delete values saved using [Fine-tune and save lens], highlight the desired lens in the [List saved values] list and press O.
Creating and Saving Fine-Tuning Values 1 Attach the lens to the camera. 2 Select [AF fine-tuning options] in the setup menu, then highlight [Fine-tune and save lens] and press 2. An AF fine-tuning dialog will be displayed. 3 Press 4 or 2 to fine-tune autofocus. Choose from values between +20 and −20. The current value is shown by g, the previously-selected value by o. If a zoom lens is attached, you can choose separate fine-tuning values for maximum angle (WIDE) and maximum zoom (TELE).
Choosing a Default Fine-Tuning Value 1 Select [AF fine-tuning options] in the setup menu, then highlight [Default] and press 2. 2 Press 4 or 2 to fine-tune autofocus. Choose from values between +20 and −20. The current value is shown by g, the previously-selected value by o. The larger the fine-tuning value, the farther the focal point is from the lens; the smaller the value, the closer the focal point. 3 Press J to save the new value.
Non-CPU Lens Data G button U B setup menu Record data for non-CPU lenses attached using an optional mount adapter. Recording the focal length and maximum aperture of non-CPU lenses allows them to be used with some camera features normally reserved for CPU lenses, such as on-board vibration reduction. Option Description [Lens number] Choose a lens identifier. [Focal length (mm)] Enter the focal length. [Maximum aperture] Enter the maximum aperture.
Save Focus Position G button U B setup menu When [ON] is selected, the camera will save the current focus position when turned off and restore it when next turned on. Note that this increases camera startup times. Note that even when [ON] is selected, if the temperature, zoom position, or other conditions change while the camera is off, focus may resume from a different position when the camera is turned on.
Save Zoom Position (PZ Lenses) G button U B setup menu If [ON] is selected when a power zoom (PZ) lens is attached, the camera will save the current zoom position when turned off and restore it when next turned on.
Auto Temperature Cutout G button U B setup menu The level at which the camera will turn off automatically as its internal temperature rises can be selected from [Standard] and [High]. When [Standard] is selected, the camera will display first a J and then a K icon as its internal temperature rises, switching to a count-down timer if the temperature increases still further.
Clean Image Sensor G button U B setup menu Dirt or dust entering the camera when lenses are exchanged or the body cap is removed may adhere to the image sensor and affect your photographs. The “clean image sensor” option vibrates the sensor to remove dust. Option [Start] [Automatic cleaning] Description Perform image sensor cleaning immediately. [Clean at shutdown]: The image sensor is automatically cleaned during shutdown each time the camera is turned off.
Image Dust Off Ref Photo G button U B setup menu Acquire reference data for the Image Dust Off option in NX Studio. Image Dust Off processes NEF (RAW) pictures to mitigate effects caused by dust adhering to the front of the camera image sensor. For more information, refer to NX Studio’s online help. Acquiring Image Dust Off Reference Data Before acquiring Image Dust Off reference data, select photo mode by rotating the photo/video selector to C. 1 Choose a start option.
3 Press the shutter-release button the rest of the way down to acquire Image Dust Off reference data. The monitor turns off when the shutter-release button is pressed. If the reference object is too bright or too dark, the camera may be unable to acquire Image Dust Off reference data, in which case a message will appear and the camera will return to the display shown in Step 1. Choose another reference object and press the shutter-release button again.
Pixel Mapping G button U B setup menu Pixel mapping checks and optimizes the camera image sensor. If you notice unexpected bright spots appearing in pictures taken with the camera, perform pixel mapping as described below. Pixel mapping is available only when a Z mount lens or an optional FTZ II/FTZ mount adapter is attached.
Image Comment G button U B setup menu Add a comment to new photographs as they are taken. Comments can be viewed in the NX Studio [Info] tab. Input Comment Input a comment of up to 36 characters. Highlight [Input comment] and press 2 to display a text-entry dialog. For information on text entry, see “Text Entry” ( 0 74). Attach Comment Comments will be attached to pictures taken while [Attach comment] is [ON].
Copyright Information G button U B setup menu Add copyright information to new photographs as they are taken. Copyright information can be viewed in the NX Studio [Info] tab. Artist/Copyright Enter the names of the photographer (maximum 36 characters) and copyright holder (maximum 54 characters). Highlight [Artist] or [Copyright] and press 2 to display a text-entry dialog. For information on text entry, see “Text Entry” ( 0 74).
D Cautions: Copyright Information To prevent unauthorized use of the artist or copyright holder names, make sure that [OFF] is selected for [Attach copyright information] before lending or transferring the camera to another person. You will also need to make sure that the artist and copyright fields are blank. Nikon does not accept liability for any damages or disputes arising from the use of the [Copyright information] option.
IPTC G button U B setup menu IPTC presets can be created or edited on the camera and embedded in new photographs as described below. You can also load IPTC presets created on a computer. To create IPTC presets and save them to memory cards for later import, use IPTC Preset Manager ( 0 700). Creating, Renaming, Editing, and Copying Presets Highlight [Edit/save] and press 2 to display the [Select preset to edit or save] list of existing presets. To edit or rename a preset, highlight it and press 2.
Embedding Presets Highlighting [Auto embed during shooting] and pressing 2 displays a list of presets. Highlight a preset and press J; the selected preset will be embedded in all subsequent photographs. To disable embedding, select [Off]. D Viewing IPTC Data Embedded presets can be viewed on the [IPTC data] page in the photo information display. To display the [IPTC data] page, select (M) both [Shooting data] and [IPTC data] for [Playback display options] in the playback menu.
Copying Presets to the Camera The camera can store up to ten presets; to copy IPTC presets from a memory card to a selected destination on the camera, select [Load/ save] > [SD card slot] or [microSD card slot], then highlight [Copy to camera] and press 2. Highlight a preset and press J to proceed to the [Select destination] list. To preview the highlighted preset, press W (Q) instead of pressing J. After previewing the preset, press J to proceed to the [Select destination] list.
D Cautions: IPTC Information The camera supports standard roman alphanumeric characters only. Other characters will not display correctly except on a computer. Preset names ( 0 696) may be up to 18 characters long. If a preset with a longer name is created using a computer, all characters after the eighteenth will be deleted. The number of characters that may appear in each field is given below. Any characters over the limit will be deleted. Field Max.
D IPTC IPTC is a standard established by the International Press Telecommunications Council (IPTC) with the intent of clarifying and simplifying the information required when photographs are shared with a variety of publications. D IPTC Preset Manager IPTC presets can be created on a computer and saved to memory cards using IPTC Preset Manager software. IPTC Preset Manager can be downloaded free of charge from the URL below. https://downloadcenter.nikonimglib.
Voice Memo Options G button U B setup menu Adjust settings for voice memos ( 0 276, 0 278). Voice Memo Control Choose the behavior of controls to which [Voice memo] has been assigned via Custom Setting f3 [Custom controls (playback)]. Option Description 3 [Press and hold] Voice memos up to 60 seconds long can be recorded while the control is pressed. 4 [Press to start/ stop] Recording begins when the control is pressed and ends after about 60 seconds or when the control is pressed a second time.
Audio Output (Playback) Choose the device used for voice memo playback. Option 5 [Speaker/ headphones] Description Voice memos are played back over headphones (if connected) or the camera’s built-in speaker. Press 1 or 3 to choose a volume between [1] and [15]. Press J to save changes and exit. 7 6 [HDMI] [Off] Voice memos are output to the HDMI terminal at a fixed volume.
Camera Sounds G button U B setup menu Beep On/Off Turn the beep speaker on or off. If [On] is selected for [Beep on/off], beeps sound when: - the self-timer counts down, - interval-timer photography, time-lapse video recording, focus shift, or pixel shift ends, - the camera focuses in photo mode (note that this does not apply if AF‑C is selected for focus mode or if [Release] is selected for Custom Setting a2 [AF‑S priority selection]), or - touch controls are used.
Silent Mode G button U B setup menu Select [ON] to enable the electronic shutter, eliminating the noise and vibration caused by the motion of the mechanical shutter (“shutter shock”). Enabling silent mode also suppresses other camera sounds. It does not, however, completely silence the camera. Camera sounds may still be audible, for example during autofocus or aperture adjustment, in the latter case most noticeably at apertures smaller (i.e., at f-numbers higher) than f/5.6.
Touch Controls G button U B setup menu Adjust settings for monitor touch controls. Enable/Disable Touch Controls Enable or disable touch controls. Select [Playback only] to enable touch controls in playback mode only. Glove Mode Selecting [ON] raises the sensitivity of the touch screen, making it easier to use while wearing gloves.
Self-Portrait Mode G button U B setup menu Select [OFF] to prevent the camera entering self-portrait mode when the monitor is in the self-portrait position.
HDMI G button U B setup menu Adjust settings for connection to HDMI devices ( 0 283).
USB Connection Priority G button U B setup menu Choose the function assigned priority when the camera is connected to a computer via USB. Option Description [Upload] The monitor remains blank while the camera is connected to a computer. The monitor turns on when the shutter-release button is pressed halfway but upload speeds may drop. [Shooting] The monitor remains on while the camera is connected to a computer. Upload speeds may drop.
Conformity Marking G button U B setup menu View some of the standards with which the camera complies.
Battery Info G button U B setup menu View information on the battery currently inserted in the camera. Option Description [Charge] The current battery level, expressed as a percentage. [No. of shots] The number of pictures taken since the battery was last charged. A five-level display showing battery age. [Battery age] A value of “0” (k) indicates that battery performance is unimpaired. A value of “4” (l) indicates that the battery has reached the end of its charging life. Replace the battery.
USB Power Delivery G button U B setup menu Choose whether the camera draws power from devices connected via USB. USB power delivery allows the camera to be used while limiting the drain on the battery. Option [ON] Description The camera draws power from connected devices while on. Connected devices will also supply power when the camera is off if Bluetooth upload is in progress or the memory card access lamp is lit. [OFF] The camera does not draw power from connected devices at any time.
D Computer USB Power Delivery Before using a computer to supply power to the camera, check that the computer is equipped with a Type C USB connector. Use the supplied UC-E25 USB cable (with Type C connectors at both ends) to connect the camera to the computer. Depending on the model and product specifications, some computers will not supply current to power the camera.
Energy Saving (Photo Mode) G button U B setup menu In photo mode, the shooting display will dim to save power approximately 15 seconds before the standby timer expires. Option Description [ON] Enable energy saving. The display refresh rate may drop. [OFF] Disable energy saving. Note selecting [OFF] does not stop the shooting display dimming a few seconds before the standby timer expires.
Slot Empty Release Lock G button U B setup menu Choose whether the shutter can be released when no memory card is inserted in the camera. Option Description a [Release locked] The shutter cannot be released when no memory card is inserted. b [Enable release] The shutter can be released with no memory card inserted. No pictures will be recorded; during playback, the camera displays [Demo].
Save/Load Menu Settings G button U B setup menu Save current camera menu settings to a memory card. You can also load saved settings, allowing menu settings to be shared among cameras of the same model. If two memory cards are inserted, the settings will be saved to the card selected for [Primary slot selection] in the photo shooting menu.
- [Release mode] [Focus mode] [AF-area mode] [AF/MF subject detection options] [MF subject detection area] [Vibration reduction] (the options available vary with the lens) [Link VR to focus point] [Auto bracketing] 716 Save/Load Menu Settings
VIDEO RECORDING MENU - [File naming] - [Destination] - [Video file type] - [Frame size/frame rate] - [Image area] - [ISO sensitivity settings] - [White balance] - [Set Picture Control] (Custom Picture Controls are saved as [Auto]) - [HLG quality] - [Active D-Lighting] - [High ISO NR] - [Vignette control] - [Diffraction compensation] - [Auto distortion control] - [Skin softening] - [Portrait impression balance] - [Video flicker reduction] - [Metering] - [Focus mode] - [AF-area mode] - [AF/MF subject detectio
CUSTOM SETTINGS MENU: All items PLAYBACK MENU - [Playback display options] - [Delete pictures from both slots] - [Dual-format recording PB slot] - [Filtered playback criteria] - [Series playback] - [Picture review] - [After delete] - [After burst, show] - [Auto-rotate pictures] SETUP MENU - [Language] - [Time zone and date] (excepting [Date and time]) - [Finder display size (photo Lv)] - [Limit monitor mode selection] - [Auto rotate info display] - [Non-CPU lens data] - [Save focus position] - [Save zoom po
MY MENU - The current contents of “My Menu” - [Choose tab] RECENT SETTINGS - The current contents of the recent settings menu (up to 20 items) - [Choose tab] Save Menu Settings Save settings to a memory card. If the card is full, an error will be displayed and settings will not be saved. Saved settings can only be used with other cameras of the same model. Load Menu Settings Load saved settings from a memory card.
Reset All Settings G button U B setup menu Reset all settings except [Language] and [Time zone and date] to their default values. Copyright information and other user-generated entries are also reset. Once reset, settings cannot be restored. We recommend that you save settings using the [Save/load menu settings] item in the setup menu before performing a reset.
Firmware Version G button U B setup menu View the current camera firmware version. Firmware updates can be performed if the memory card contains new firmware. The camera displays firmware versions for the camera and attached accessories as follows. Only accessories currently connected to the camera are listed.
The Network Menu Menu Items and Defaults To view the network menu, select the F tab in the camera menus. The options in the network menu are listed below, together with their default settings.
- [Upload RAW + HEIF as] - [Overflow/backup]: RAW + HEIF - [RAW primary - HEIF secondary]: RAW + HEIF - [JPEG+JPEG slot selection]: Primary slot - [HEIF+HEIF slot selection]: Primary slot - [Upload folder]: — - [Deselect all?]: — [Connect to FTP server] - [Network settings]: — - [Options] - [Auto upload]: OFF - [Delete after upload]: OFF - [Upload RAW + JPEG as] - [Overflow/backup]: RAW + JPEG - [RAW primary - JPEG secondary]: RAW + JPEG - [Upload RAW + HEIF as] - [Overflow/backup]: RAW + HEIF - [RAW primar
Airplane Mode G button U F network menu Select [ON] to disable the camera’s built-in Bluetooth and Wi-Fi functions.
Connect to Smart Device G button U F network menu Connect to smartphones or tablets (smart devices) via Bluetooth or Wi-Fi. Pairing (Bluetooth) Pair with or connect to smart devices using Bluetooth. Option Description [Start pairing] Pair the camera with a smart device ( 0 290). [Paired devices] List paired smart devices. To connect, select a device from the list. [Bluetooth connection] Select [ON] to enable Bluetooth.
Select Pictures for Upload Select pictures for upload to a smart device. You can also opt to upload pictures as they are taken. Option Description [Auto select for upload] Select [ON] to upload pictures as they are taken. [Manually select for upload] Upload selected pictures. Transfer marking appears on the selected pictures. [Deselect all] Cancel upload of all pictures currently selected for transfer. Wi-Fi Connection Connect to smart devices via Wi-Fi.
Wi-Fi Connection Settings Access the following Wi-Fi settings: Option Description [SSID] Choose the camera SSID. [Authentication/ encryption] Choose [OPEN], [WPA2-PSK], [WPA3-SAE], or [WPA2-PSK/WPA3SAE]. [Password] Choose the camera password. [Channel] Choose a channel. Select [Auto] to have the camera choose the channel automatically. Select [Manual] to choose the channel manually. [Current settings] View current Wi-Fi settings.
Upload While Off If [ON] is selected, upload of pictures to smart devices via wireless connections will continue even when the camera is off. Location Data (Smart Device) Display latitude, longitude, altitude, and UTC (Universal Coordinated Time) data downloaded from a smart device. For information on downloading location data from smart devices, see the online help for the SnapBridge app.
Wireless Remote (ML-L7) Options G button U F network menu Connect to optional ML‑L7 remote controls via Bluetooth. You can also choose the roles played by the Fn1 and Fn2 buttons on the ML‑L7. For information on connecting to remote control and on the features they support, see “ML‑L7 Remote Controls” in the section on “Other Compatible Accessories” ( 0 818). Wireless Remote Connection (ML‑L7) Option Description [ON] Connect to the ML‑L7 with which the camera has most recently been paired.
Delete Wireless Remote Controller End pairing between the camera and the remote control. Assign Fn1 Button/Assign Fn2 Button Choose the roles played by the Fn1 and Fn2 buttons on the ML‑L7. Option Description [Playback] Press the button to start playback. Pressing the button while playback is in progress ends playback and returns you to the shooting display. [Same as camera y button] The button performs the same function as the camera G button.
Connect to Computer G button U F network menu Connect to computers via wireless LAN. Network Settings Add camera network profiles. This item can also be used to choose from existing network profiles. Create Profile Create new network profiles ( 0 303). If more than one profile already exists, you can press J to choose a profile and connect to the selected network. To edit an existing profile, highlight it and press 2. Option [General] Description [Profile name]: Rename the profile.
Option Description Display connection settings for connection to wireless networks. [Wireless] Infrastructure mode: Adjust settings for connection to a network via a router. - [SSID]: Enter the network SSID. - [Channel]: Selected automatically. - [Authentication/encryption]: Select the type of encryption used on the wireless network. - [Password]: Enter the network password. Access-point mode: Adjust settings for direct wireless connection to the camera. - [SSID]: Choose the camera SSID.
Copy to/from Card Share network profiles. If two memory cards are inserted, the profiles will be copied to and from the card in the slot selected for [Primary slot selection] in the photo shooting menu. Option [Copy profile from card] [Copy profile to card] Description Copy profiles from the root directory of the memory card to the camera profile list. Copy profiles from the camera to the memory card. Highlight a profile and press J to copy it to the memory card.
Options Adjust upload settings. Auto Upload Select [ON] to mark new photos for upload as they are taken. Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera. Videos are not uploaded automatically. They must instead be uploaded from the playback display ( 0 227). Delete After Upload Select [ON] to delete photographs from the camera memory card automatically once upload is complete.
JPEG + JPEG Slot Selection Choose a source slot for auto upload when taking pictures with [JPEG primary - JPEG secondary] selected for [Secondary slot function] in the photo shooting menu. HEIF + HEIF Slot Selection Choose a source slot for auto upload when taking pictures with [HEIF primary - HEIF secondary] selected for [Secondary slot function] in the photo shooting menu. Upload Folder Mark all photos in a selected folder for upload.
Connect to FTP Server G button U F network menu Connect to FTP servers via wireless LAN. Network Settings Add camera network profiles. This item can also be used to choose from existing network profiles. Create Profile Create new network profiles ( 0 317). If more than one profile already exists, you can press J to choose a profile and connect to the selected network. To edit an existing profile, highlight it and press 2. Option [General] [Wireless] Description [Profile name]: Rename the profile.
Option Description Adjust TCP/IP settings for infrastructure connections. An IP address is required. [TCP/IP] [FTP] [Obtain automatically]: If [ON] is selected, the IP address and sub-net mask for infrastructure mode connections will be acquired via a DHCP server or automatic IP addressing. Select [OFF] to enter the IP address ([Address]) and sub-net mask ([Mask]) manually. [Gateway]: Enter the network’s default gateway address, if required.
Copy to/from Card Share network profiles. If two memory cards are inserted, the profiles will be copied to and from the card in the slot selected for [Primary slot selection] in the photo shooting menu. Option [Copy profile from card] [Copy profile to card] Description Copy profiles from the root directory of the memory card to the camera profile list. Copy profiles from the camera to the memory card. Highlight a profile and press J to copy it to the memory card.
Options Adjust upload settings. Auto Upload Select [ON] to mark new photos for upload as they are taken. Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera. Videos are not uploaded automatically. They must instead be uploaded from the playback display ( 0 227). Delete After Upload Select [ON] to delete photographs from the camera memory card automatically once upload is complete.
Upload RAW + HEIF As When uploading RAW + HEIF pictures, choose whether to upload both the NEF (RAW) and HEIF files or only the NEF (RAW) or HEIF copy. Separate options can be selected for [Overflow/backup] and [RAW primary - HEIF secondary]. The option selected for [Overflow/backup] takes effect during both auto and manual upload. The option selected for [RAW primary - HEIF secondary] applies only during auto upload.
Upload Marking Select [ON] to add a timestamp to the pictures on the camera memory card giving the time of upload. Upload Folder Mark all photos in a selected folder for upload. Marking will be applied to all photos, regardless of whether they have been uploaded previously. Videos will not be marked for upload. They must instead be uploaded from the playback display. Deselect All? Remove upload marking from all pictures. Upload of pictures with an “uploading” icon will immediately be terminated.
Manage Root Certificate Load or manage root certificates used for connection to FTPS servers. Contact the network administrator for the FTPS server in question for information on acquiring root certificates. Option Description [Import root certificate] Import a root certificate to the camera from a memory card. The certificate must be in the card’s root (top) directory. The camera can import root certificate files named “ROOT.CER”, “ROOT.CRT”, or “ROOT.PEM”.
Connect to Other Cameras G button U F network menu Connect to other cameras for shutter or clock synchronization. Synchronized Release Select [ON] to synchronize the shutter release with those of cameras on the same network. Network Settings Add camera network profiles. This item can also be used to choose from existing network profiles. Create Profile Create new network profiles ( 0 343). If more than one profile already exists, you can press J to choose a profile and connect to the selected network.
Copy to/from Card Share network profiles. If two memory cards are inserted, the profiles will be copied to and from the card in the slot selected for [Primary slot selection] in the photo shooting menu. Option [Copy profile from card] [Copy profile to card] Description Copy profiles from the root directory of the memory card to the camera profile list. Copy profiles from the camera to the memory card. Highlight a profile and press J to copy it to the memory card.
Remote Camera List The master camera lists the remote cameras connected. Synchronize Date and Time Set the clocks on the remote cameras to the date and time reported by the master camera ( 0 353).
ATOMOS AirGlu BT Options G button U F network menu Manage wireless Bluetooth connections between the camera and Atomos UltraSync BLUE AirGlu accessories. The UltraSync BLUE can be used for simultaneous wireless connections to multiple compatible cameras or audio recorders. Time codes are transmitted to the connected devices from the UltraSync BLUE, synchronizing time codes even across devices from a mix of manufacturers.
D Cautions: Using the UltraSync BLUE Time codes will not be recorded if [H.264 8-bit (MP4)] is selected for [Video file type] in the video recording menu. The UltraSync BLUE allows users to choose the frame rate. If the value is not a match for that chosen with the camera, time codes will not be recorded or output via HDMI. Match the frame rate for the UltraSync BLUE to the video recording frame rate as follows: Video recording frame rate UltraSync BLUE frame rate 120p, 60p, 30p 29.97 fps, 29.
USB G button U F network menu Adjust settings for connection to other devices via USB. Select [MTP/PTP] when connecting to computers or Android devices via USB. Select [iPhone] when connecting to iPhones via a third-party USB‑C to Lightning cable in order to use NX MobileAir (for information on compatible USB‑C to Lightning cables, see the online help for NX MobileAir). D Caution: “iPhone” Selecting [iPhone] enables connection only to iPhones running the NX MobileAir app.
Router Frequency Band G button U F network menu Choose the band for the selected SSID when connecting to a wireless network in infrastructure mode. Select [2.4 GHz/5 GHz] to connect to networks operating on either band. When the camera searches for networks active in the vicinity, it will list only those operating on the chosen band or bands. The band is listed to the left of the network SSID. If you select [2.
MAC Address G button U F network menu View the MAC address.
My Menu/Recent Settings Menu Items and Defaults To view [MY MENU], select the O tab in the camera menus. The options in “My Menu” are listed below, together with their default settings.
My Menu: Creating a Custom Menu G button U O my menu My Menu can be used to create and edit a customized list of up to 20 items from the photo shooting, video recording, Custom Settings, playback, setup, and network menus. Items can be added, deleted, and reordered as described below. Adding Items to My Menu 1 Select [Add items] in [O MY MENU]. Highlight [Add items] and press 2. 2 Select a menu. Highlight the name of the menu containing the item you wish to add and press 2. 3 Select an item.
4 Position the new item. Press 1 or 3 to position the new item and press J to add it to My Menu. 5 Add more items. The items currently displayed in My Menu are indicated by a check mark (L). Items indicated by a V icon cannot be selected. Repeat Steps 1–4 to select additional items.
Removing Items from My Menu 1 Select [Remove items] in [O MY MENU]. Highlight [Remove items] and press 2. 2 Select items. Highlight items and press J or 2 to select (M) or deselect. Continue until all the items you wish to remove are selected (L). 3 Remove the selected items. Press O; a confirmation dialog will be displayed. Press J to remove the selected items.
Reordering Items in My Menu 1 Select [Rank items] in [O MY MENU]. Highlight [Rank items] and press 2. 2 Select an item. Highlight the item you wish to move and press J. 3 Position the item. Press 1 or 3 to move the item up or down in My Menu and press J. Repeat Steps 2–3 to reposition additional items. 4 Exit to [O MY MENU]. Press the G button to return to [O MY MENU].
Displaying “RECENT SETTINGS” 1 Select [Choose tab] in [O MY MENU]. Highlight [Choose tab] and press 2. 2 Select [m RECENT SETTINGS]. Highlight [m RECENT SETTINGS] in the [Choose tab] menu and press J. The name of the menu will change from [MY MENU] to [RECENT SETTINGS] and the tab icon will change from O to m.
Recent Settings: Accessing Recently-Used Settings G button U m recent settings How Items Are Added to “RECENT SETTINGS” Menu items are added to the top of the [RECENT SETTINGS] menu as they are used. The twenty most recently-used settings are listed. D Removing Items from the Recent Settings Menu To remove an item from the [RECENT SETTINGS] menu, highlight it and press the O button; a confirmation dialog will be displayed. Press O again to remove the selected item.
Troubleshooting Before Contacting Customer Support You may be able to resolve any issues with the camera by following the steps below. Check this list before consulting your retailer or Nikon-authorized service representative. 1 Check the list of common problems.
D Restoring Default Settings Depending on current settings, some menu items and other features may be unavailable. To access menu items that are grayed out or features that are otherwise unavailable, try restoring default settings using the [Reset all settings] item in the setup menu. Note, however, that wireless network profiles, copyright information, and other user-generated entries will also be reset. Once reset, settings cannot be restored.
Problems and Solutions Solutions to some common issues are listed below. Battery/Display ● The camera is on but does not respond: Wait for recording and other operations to end. If the problem persists, turn the camera off. If the camera does not turn off, remove and reinsert the battery. If you are using an AC adapter, disconnect and reconnect the AC adapter. - Any data currently being recorded will be lost.
● The display in the control panel, viewfinder, or monitor turns off without warning: Choose longer delays for Custom Setting c3 [Power off delay]. ● The control panel is unresponsive and dim: Control panel response times and brightness vary with temperature. ● The viewfinder is unresponsive: The display refresh rate may drop about 20 seconds before the standby timer turns off.
Shooting ● The camera takes time to turn on: More time will be needed to find files if the memory card contains large numbers of files or folders. ● The shutter cannot be released: Is a memory card inserted, and if so, does it have space available? If you selected mode S after selecting a shutter speed of “Bulb” or “Time” in mode M, choose a different shutter speed.
● The beep does not sound: Is [ON] selected for [Silent mode] in the setup menu? A beep does not sound when the camera focuses with AF‑C selected for focus mode. Select an option other than [Off] for [Camera sounds] > [Beep on/off] in the setup menu. The beep does not sound in video mode. ● The full range of shutter speeds is not available: Using a flash restricts the range of shutter speeds available. Flash sync speed can be set to values of ¹⁄₂₀₀–¹⁄₆₀ s using Custom Setting e1 [Flash sync speed].
● Flicker or banding appears in video mode: Select [Video flicker reduction] in the video recording menu and choose an option that matches the frequency of the local AC power supply. ● Bright regions or bands appear: Bright regions or bands may occur if the subject is lit by a flashing sign, flash, or other light source with brief duration.
● Image artifacts appear in the display during shooting: To reduce noise, adjust settings such as ISO sensitivity, shutter speed, or Active D-Lighting. At high ISO sensitivities, noise may become more noticeable in long exposures or in pictures recorded when the camera temperature is elevated. Randomly-spaced bright pixels, fog, or bright spots may arise as a result of increases in the temperature of the camera’s internal circuits. Turn the camera off when it is not in use.
● Exposure compensation is not available: Changes to exposure compensation in mode M apply only to the exposure indicator and have no effect on shutter speed or aperture. ● Uneven shading appears in long exposures: Uneven shading may appear in long exposures shot at shutter speeds of “Bulb” or “Time”. The effect can be mitigated by selecting [ON] for [Long exposure NR] in the photo shooting menu.
Playback ● NEF (RAW) pictures are not visible during playback: The camera displays only the JPEG or HEIF copies of pictures taken with [RAW + JPEG/HEIF finem], [RAW + JPEG/HEIF fine], [RAW + JPEG/HEIF normalm], [RAW + JPEG/HEIF normal], [RAW + JPEG/HEIF basicm], or [RAW + JPEG/HEIF basic] selected for [Image quality]. ● Pictures taken with other cameras are not displayed: Pictures recorded with other types of camera may not display correctly.
● The camera displays the message, “Folder contains no pictures”: Select [All] for [Playback folder] in the playback menu. ● NEF (RAW) pictures cannot be printed: Print JPEG or HEIF copies of the pictures created using a tool such as the [RAW processing (current picture)] or [RAW processing (multiple pictures)] items accessible via [Retouch] in the playback i menu. Copy the pictures to a computer and print them using NX Studio or other software that supports the NEF (RAW) format.
● The effects of [Set Picture Control], [Set Picture Control (HLG)], [Active D-Lighting], or [Vignette control] are not visible: In the case of NEF (RAW) pictures, the effects can only be viewed using Nikon software. View NEF (RAW) pictures using NX Studio. ● Pictures cannot be copied to a computer: Depending on the operating system, you may be unable to upload pictures when the camera is connected to a computer. Copy pictures from the memory card to a computer using a card reader or other device.
Bluetooth and Wi‑Fi (Wireless Networks) ● Smart devices do not display the camera SSID (network name): Navigate to the network menu and confirm both that [OFF] is selected for [Airplane mode] and that [ON] is selected for [Connect to smart device] > [Pairing (Bluetooth)] > [Bluetooth connection]. Confirm that [Connect to smart device] > [Wi-Fi connection] is enabled in the network menu. Try disabling and re-enabling wireless network features on the smart device.
Miscellaneous ● The date of recording is not correct: Is the camera clock set correctly? The clock is less accurate than most watches and household clocks; check it regularly against more accurate timepieces and reset as necessary. ● Menu items cannot be selected: Some items are not available at certain combinations of settings.
Alerts and Error Messages This section lists the alerts and error messages that appear in the camera display. Alerts The following alerts appear in the camera display: Problem/solution Alert H l Low battery. Ready a spare battery. Lens is not correctly attached. Ensure that lens is correctly attached. Ensure that retractable lenses are extended. This indicator is also displayed when a non-CPU lens is attached via a mount adapter, but in this case no action need be taken.
Alert c (flashes) Problem/solution Flash has fired at full power. Photo may be underexposed. Check distance to subject and settings such as aperture, flash range, and ISO sensitivity. Memory insufficient to record further photos. Delete pictures from memory card until there is room for additional pictures to be recorded. Copy pictures you wish to keep to computer or other device before proceeding. Insert new memory card. Full (flashes) Camera has run out of file numbers.
Error Messages The following error messages may appear in the camera display: Message Shutter release disabled. Recharge battery. This battery is unable to provide data to the camera and cannot be used. For safety, choose a battery designated for use in this camera. No memory card. Cannot access this memory card. Insert another card. Problem/solution Battery exhausted. Replace with spare battery. Charge battery. Battery info not available. Battery cannot be used.
Message Recording interrupted. Please wait. The camera is too hot. It cannot be used until it cools. Please wait. Camera will turn itself off. Problem/solution Memory card does not support required video write speed. Use card that supports required write speed or change option selected for [Frame size/frame rate] in video recording menu. Camera’s internal temperature is elevated. Suspend shooting until camera has cooled. High battery temperature. Remove battery and wait for it to cool.
Technical Notes Compatible Lenses and Accessories The camera can be used with all Z mount lenses. Confirm that the lens name includes “NIKKOR Z”. Be sure to update to the latest versions of the camera and lens firmware. With earlier versions, some functions may not be available or the camera may fail to correctly detect the lens. The latest firmware is available from the Nikon Download Center. For more information on lenses, see the lens documentation available from the Nikon Download Center.
Camera Displays The displays show information on current settings. Other icons or warnings may occasionally be displayed, for example when settings are changed.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Shooting mode ( 0 131) Flexible program indicator ( 0 132) Out-of-focus indicator (auto-area AF; 0 95) Temperature warning ( 0 688) Release mode ( 0 145) Interval-timer photography indicator ( 0 448) t icon ( 0 94) “No memory card” indicator ( 0 82, 0 780) Focus mode ( 0 114) Time-lapse video indicator ( 0 459) AF-area mode ( 0 116) Subject detection ( 0 120) Flash mode ( 0 359) FTP connection status ( 0 316) White balance ( 0 157) Image quality ( 0 110) 2
27 26 25 24 23 22 21 20 19 18 1 2 3 4 5 17 1 2 3 4 5 6 7 8 9 10 11 16 15 14 13 12 11 10 9 8 12 13 14 15 16 17 18 19 20 21 22 Exposure indicator Exposure ( 0 136) Exposure compensation ( 0 143) Auto bracketing ( 0 423) Remote camera connection status ( 0 343) i icon ( 0 75) Battery indicator ( 0 84) USB power delivery ( 0 711) Flash-ready indicator ( 0 355) Number of exposures remaining ( 0 85, 0 854) Camera control mode display ( 0 337) Wi-Fi connection indicator ( 0 294, 0 303, 0 317) Bluetooth co
D Temperature Warnings If the camera temperature becomes elevated, a temperature warning and count-down timer will be displayed. When the timer reaches zero, the shooting display will turn off. The temperature at which the count-down timer starts can be selected from [Standard] and [High] using [Auto temperature cutout] in the setup menu. The timer turns red when the thirty second mark is reached. In some cases, the timer may be displayed immediately after the camera is turned on.
The Information Display 1 2 3 4 5 1 2 3 4 5 Shooting mode ( 0 131) Flexible program indicator ( 0 132) Shutter speed ( 0 132, 0 135) 781 Aperture ( 0 134, 0 135) Exposure indicator Exposure ( 0 136) Exposure compensation ( 0 143) Auto bracketing ( 0 423) Camera Displays
1 10 2 9 8 7 3 6 5 4 1 2 3 4 5 6 Wi-Fi connection indicator ( 0 294, 0 303, 0 317) Bluetooth connection indicator ( 0 725) Exposure and flash bracketing indicator ( 0 424) WB bracketing indicator ( 0 429) ADL bracketing indicator ( 0 432) HDR indicator ( 0 445) Multiple exposure indicator ( 0 438) Pixel shift indicator ( 0 478) Number of exposures remaining ( 0 85, 0 854) Camera control mode display ( 0 337) 7 8 9 10 782 i icon ( 0 75) ISO sensitivity ( 0 152) ISO sensitivity indicator ( 0 152) A
1 2 3 4 5 6 7 8 21 20 19 18 9 10 11 17 16 15 12 13 14 1 2 3 4 5 6 7 8 9 10 t icon ( 0 94) Interval-timer photography indicator ( 0 448) Time-lapse video indicator ( 0 459) Flash control mode ( 0 358) Silent mode ( 0 704) Long-exposure noise reduction indicator ( 0 401) Shutter type ( 0 559) “Beep” indicator ( 0 703) Battery indicator ( 0 84) USB power delivery ( 0 711) Image size ( 0 112) AF-area mode/subject detection ( 0 116, 0 120) 783 11 12 13 14 15 16 17 18 19 20 21 Focus mode ( 0 114) Vi
Video Mode 1 2 3 4 5 6 15 7 8 9 14 10 13 12 1 2 3 4 5 6 7 11 8 9 10 11 12 13 14 15 Recording indicator “No video” indicator ( 0 102) External recording control ( 0 282) Length of footage recorded Timecode ( 0 519) Frame size and rate ( 0 189) Destination ( 0 489) Available recording time Picture Control ( 0 176) Image area ( 0 192) Video file type ( 0 187) Recording indicator (red border; Sound level ( 0 513) Microphone sensitivity ( 0 513) Electronic VR indicator ( 0 512) Headphone volume (
The Viewfinder Photo Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 785 Camera Displays
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 “Lens built-in teleconverter enabled” indicator View mode ( 0 564) Release mode ( 0 145) Focus mode ( 0 114) AF-area mode ( 0 116) Subject detection ( 0 120) Flash mode ( 0 359) White balance ( 0 157) Active D-Lighting ( 0 399) Picture Control ( 0 176) Image quality ( 0 110) Image size ( 0 112) Image area ( 0 108) Out-of-focus indicator (auto-area AF; 0 95) Focus point ( 0 123) Exposure and flash bracketing indicator ( 0 424) WB bracketing indicator ( 0 429) ADL b
24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 1 2 3 4 5 6 7 8 9 10 11 9 8 76 5 12 13 14 15 USB power delivery ( 0 711) Battery indicator ( 0 84) Flash-ready indicator ( 0 355) Number of exposures remaining ( 0 85, 0 854) Camera control mode display ( 0 337) ISO sensitivity ( 0 152) ISO sensitivity indicator ( 0 152) Auto ISO sensitivity indicator ( 0 155) Exposure compensation indicator ( 0 143) Exposure indicator Exposure ( 0 136) Exposure compensation ( 0 143) Auto bracketing ( 0 423) Aperture ( 0 1
Video Mode 1 2 3 4 5 6 7 8 9 15 14 10 13 12 11 1 2 3 4 5 6 7 8 9 Headphone volume ( 0 518) Zebra pattern ( 0 640) Picture Control ( 0 176) Tone mode ( 0 188) Frame size and rate ( 0 189) Image area ( 0 192) Video file type ( 0 187) 10 11 12 13 14 15 Available recording time 788 Destination ( 0 489) Length of footage recorded Timecode ( 0 519) Recording indicator (red border; Electronic VR indicator ( 0 512) Microphone sensitivity ( 0 513) Sound level ( 0 513) 0 648) External recording control
Compatible Flash Units The Nikon Creative Lighting System (CLS) Nikon’s advanced Creative Lighting System (CLS) supports a variety of features thanks to improved communication between the camera and compatible flash units.
The SB‑5000 Supported features Stand-alone i‑TTL balanced fill-flash 41 Standard i‑TTL fill-flash 42 i‑TTL qA Auto aperture 4 A Non-TTL auto — GN Distance-priority manual 4 M Manual 4 Repeating flash 4 RPT 790 Compatible Flash Units
Supported features Optical Advanced Wireless Lighting Master Remote flash control 4 i‑TTL i‑TTL 4 [A : B] Quick wireless flash control 4 qA Auto aperture 4 A Non-TTL auto — M Manual 4 RPT Repeating flash 4 i‑TTL i‑TTL 4 [A : B] Quick wireless flash control 4 qA/A Auto aperture/non-TTL auto 43 Remote M RPT Manual 4 Repeating flash 4 Radio-controlled Advanced Wireless Lighting — Color Information Communication (flash) 4 Color Information Communication (LED light) — Aut
Supported features Camera modeling illumination 4 Unified flash control — Camera flash unit firmware update 4 1 Not available with spot metering. 2 Can also be selected via the flash unit. 3 Choice of qA and A depends on the option selected with the master flash. 4 Available only in i‑TTL, qA, A, GN, and M flash-control modes. 5 Available only in i‑TTL flash control mode or when the flash is configured to emit monitor preflashes in qA or A flash control mode.
Supported features Optical Advanced Wireless Lighting Master Remote flash control 4 i‑TTL i‑TTL 4 [A : B] Quick wireless flash control — qA Auto aperture 4 A Non-TTL auto — M Manual 4 RPT Repeating flash 4 i‑TTL i‑TTL 4 [A : B] Quick wireless flash control 4 qA/A Auto aperture/non-TTL auto 44 Remote M RPT Manual 4 Repeating flash 4 Radio-controlled Advanced Wireless Lighting — Color Information Communication (flash) 4 Color Information Communication (LED light) — Aut
Supported features Camera modeling illumination 4 Unified flash control — Camera flash unit firmware update 47 1 Not available with spot metering. 2 Can also be selected via the flash unit. 3 qA/A mode selection is performed on the flash unit using custom settings. 4 Choice of qA and A depends on the option selected with the master flash. 5 Available only in i‑TTL, qA, A, GN, and M flash-control modes.
Supported features Optical Advanced Wireless Lighting Master Remote flash control 4 i‑TTL i‑TTL 4 [A : B] Quick wireless flash control 4 qA Auto aperture — A Non-TTL auto — M Manual 4 RPT Repeating flash — i‑TTL i‑TTL 4 [A : B] Quick wireless flash control 4 qA/A Auto aperture/non-TTL auto — Manual 4 Repeating flash 4 Remote M RPT Radio-controlled Advanced Wireless Lighting — Color Information Communication (flash) 4 Color Information Communication (LED light) — Auto
Supported features Camera modeling illumination 4 Unified flash control — Camera flash unit firmware update 4 1 Not available with spot metering. 2 Available only in i‑TTL, GN, and M flash-control modes. 3 Available only in i‑TTL flash-control mode.
Supported features Optical Advanced Wireless Lighting Master Remote flash control — i‑TTL i‑TTL — [A : B] Quick wireless flash control — qA Auto aperture — A Non-TTL auto — M Manual — RPT Repeating flash — i‑TTL i‑TTL 4 [A : B] Quick wireless flash control 4 qA/A Auto aperture/non-TTL auto — Manual 4 Repeating flash 4 Remote M RPT Radio-controlled Advanced Wireless Lighting — Color Information Communication (flash) 4 Color Information Communication (LED light) — Auto
Supported features Camera modeling illumination 4 Unified flash control — Camera flash unit firmware update — 1 2 3 4 Not available with spot metering. Can also be selected via the flash unit. Available only in i‑TTL and M flash-control modes. Available only in i‑TTL flash-control mode.
Supported features Optical Advanced Wireless Lighting Master 42 Remote flash control i‑TTL i‑TTL 42 [A : B] Quick wireless flash control — qA Auto aperture — A Non-TTL auto — M Manual 42 RPT Repeating flash — i‑TTL i‑TTL 4 [A : B] Quick wireless flash control 4 qA/A Auto aperture/non-TTL auto — Manual 4 Repeating flash 4 Remote M RPT Radio-controlled Advanced Wireless Lighting — Color Information Communication (flash) 4 Color Information Communication (LED light) 4 Au
Supported features Camera modeling illumination 4 Unified flash control — Camera flash unit firmware update 4 1 2 3 4 Not available with spot metering. Can be selected using the [Flash control] item in the camera menus. Available only in i‑TTL and M flash-control modes. Available only in i‑TTL flash-control mode.
Supported features Optical Advanced Wireless Lighting Master Remote flash control — i‑TTL i‑TTL — [A : B] Quick wireless flash control — qA Auto aperture — A Non-TTL auto — M Manual — RPT Repeating flash — i‑TTL i‑TTL 4 [A : B] Quick wireless flash control 4 qA/A Auto aperture/non-TTL auto — Manual 4 Repeating flash — Remote M RPT Radio-controlled Advanced Wireless Lighting — Color Information Communication (flash) — Color Information Communication (LED light) — Auto
Supported features Camera modeling illumination 4 Unified flash control — Camera flash unit firmware update — 1 Available only in i‑TTL and M flash-control modes. 2 Available only in i‑TTL flash-control mode.
Supported features Optical Advanced Wireless Lighting Master Remote flash control — i‑TTL i‑TTL — [A : B] Quick wireless flash control — qA Auto aperture — A Non-TTL auto — M Manual — RPT Repeating flash — i‑TTL i‑TTL — [A : B] Quick wireless flash control — qA/A Auto aperture/non-TTL auto — Manual — Repeating flash — Remote M RPT Radio-controlled Advanced Wireless Lighting — Color Information Communication (flash) 4 Color Information Communication (LED light) — Auto
Supported features Camera modeling illumination — Unified flash control — Camera flash unit firmware update — 1 Not available with spot metering. 2 Can be selected using the [Flash control] item in the camera menus. 3 Available only in i‑TTL flash-control mode.
Supported features Optical Advanced Wireless Lighting Master Remote flash control — i‑TTL i‑TTL — [A : B] Quick wireless flash control — qA Auto aperture — A Non-TTL auto — M Manual — RPT Repeating flash — i‑TTL i‑TTL — [A : B] Quick wireless flash control — qA/A Auto aperture/non-TTL auto — Manual — Repeating flash — Remote M RPT Radio-controlled Advanced Wireless Lighting — Color Information Communication (flash) 4 Color Information Communication (LED light) — Auto
Supported features Camera modeling illumination — Unified flash control — Camera flash unit firmware update 4 1 Not available with spot metering. 2 Can be selected using the [Flash control] item in the camera menus. 3 Available only in i‑TTL flash-control mode. The SU-800 Wireless Speedlight Commander When mounted on a CLS-compatible camera, the SU-800 can be used as a commander for SB‑5000, SB‑910, SB‑900, SB‑800, SB‑700, SB‑600, SB‑500, or SB‑R200 flash units.
Supported features Optical Advanced Wireless Lighting Master Remote flash control 4 i‑TTL i‑TTL — [A : B] Quick wireless flash control 41 qA Auto aperture — A Non-TTL auto — M Manual — RPT Repeating flash — i‑TTL i‑TTL — [A : B] Quick wireless flash control — qA/A Auto aperture/non-TTL auto — Manual — Repeating flash — Remote M RPT Radio-controlled Advanced Wireless Lighting — Color Information Communication (flash) — Color Information Communication (LED light) — Aut
Supported features Camera modeling illumination 4 Unified flash control — Camera flash unit firmware update — 1 Available during close-up photography only. 2 Not available when RPT is selected as the flash control mode for the remote flash unit. 3 Available only when i‑TTL is selected as the flash control mode for the remote flash unit or when the flash is configured to emit monitor preflashes in mode qA.
Notes on Optional Flash Units Be sure also to consult documentation for the optional flash unit before use. If the unit supports CLS, refer to the section on CLS-compatible digital SLR cameras. This camera is not included in the “digital SLR” category in the documentation for the SB‑80DX, SB‑28DX, and SB‑50DX.
D Flash Photography Flash photography cannot be combined with some camera features, including: silent mode, video recording, high-speed frame capture, HDR overlay, and pixel shift. D Using FV Lock with Optional Flash Units FV lock is available with optional flash units in TTL and (where supported) monitor pre-flash qA and monitor pre-flash A flash control modes (see the documentation provided with the flash unit for more information).
D Metering Areas for FV Lock The areas metered when FV lock is used with optional flash units are as follows: Stand-Alone Flash control mode Metered area i‑TTL 6-mm circle in center of frame Auto aperture (qA) Area metered by flash exposure meter Flash control mode Metered area i‑TTL Entire frame Remote Auto aperture (qA) Area metered by flash exposure meter Non-TTL auto (A) D Flash Compensation for Optional Flash Units In i‑TTL and auto aperture (qA) flash control modes, the flash compensation
Tip: Modeling Illumination Pressing the control to which [Preview] has been assigned using Custom Setting f2 [Custom controls (shooting)] causes CLS-compatible flash units to emit a modeling flash. This feature can be used with Advanced Wireless Lighting to preview the total lighting effect achieved with multiple flash units. The effects of shadows cast by the flash are best observed directly rather than in the shooting display.
Other Compatible Accessories A variety of accessories are available for your Nikon camera. D Compatible Accessories Availability may vary with country or region. See our website or brochures for the latest information. ● Power Sources EN‑EL15c Rechargeable Li-ion Battery: EN‑EL15c batteries can be used with Nikon Z f digital cameras. - EN‑EL15b and EN‑EL15a batteries can also be used. Note, however, that fewer pictures can be taken on a single charge than with the EN‑EL15c ( 0 857).
● USB Cables UC-E24 USB Cable: A USB cable with a Type C connector for connection to the camera and a Type A connector for connection to the USB device. UC-E25 USB Cable: A USB cable with two Type C connectors. ● Sync Terminal Adapters AS‑15 Sync Terminal Adapter: An adapter for the accessory shoe that allows studio flash equipment and the like to be connected via a sync terminal. ● Accessory Shoe Covers BS-1 Accessory Shoe Cover: A cover protecting the accessory shoe when no flash unit is attached.
● Flash Units SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, SB-400, and SB-300 Speedlights: These units can be mounted on the camera for flash photography. Some also support wireless remote control for off-camera flash photography with multiple flash units. - See the documentation supplied with each Speedlight for information on mounting the unit on the camera.
● Remote Controls ML‑L7 Remote Control: Pair the ML‑L7 with the camera for remote photography and video recording. ● Remote Grips MC-N10 Remote Grip: When connected to the camera, the MC-N10 can be used for such tasks as video recording, photography, and adjusting camera settings. It comes equipped with a rosette for attachment to third-party camera equipment.
D Charging Batteries Compatible batteries can be charged using the devices below. Battery MH‑25a battery charger EH‑7P charging AC adapter/ EH-8P AC adapter EN‑EL15c 4 4 EN‑EL15b 4 4 EN‑EL15a 4 — D Attaching and Removing the Accessory Shoe Cover The BS-1 accessory shoe cover slides into the shoe as shown. To remove the cover, hold the camera firmly, press the cover down with a thumb and slide it in the direction shown.
ML‑L7 Remote Controls When paired with the camera via Bluetooth, optional ML‑L7 remote controls can be used to control the camera remotely during still photography, video recording, and the like. The ML‑L7 remote control must be paired with the camera before use. The camera can be paired with only one remote at a time. If paired successively with more than one remote, the camera will respond only to the remote with which it was last paired.
Parts of the ML‑L7 Remote Control: Names and Functions Control Function 1 “−” button Performs the same function as the camera W (Q) button. 2 “+” button Performs the same function as the camera X button. 3 Video record button Press once to start video recording and again to stop. 4 Power button 5 Status lamp Press the button to turn the remote control on. - The remote control will automatically connect to the camera with which it is currently paired, assuming it is nearby.
Control Function 6 Shutter-release button Press the button to release the shutter. The remote control shutter-release button cannot be pressed halfway. The remote control shutter-release button cannot be kept pressed for burst photography. The procedure for taking photographs at a shutter speed of “Bulb” is the same as that for “Time”. 7 Multi selector Performs the same function as the multi selector on the camera. 8 J (select) button Performs the same function as the J button on the camera.
Tip: The Remote Control Status Lamp (Z f) Color Behavior Status Green Flashes approximately once a second Searching for paired camera. Green Flashes quickly (approximately twice a second) Pairing. Green Flashes approximately once every three seconds Connected to camera. Orange Flashes once Photography started. Orange Flashes twice “Bulb” or “Time” photography ended. Red Flashes once Video recording started. Red Flashes twice Video recording ended.
Connecting for the First Time (Pairing) The remote control must be paired with the camera before use. 1 Go to [Wireless remote (ML‑L7) options] in the camera network menu, highlight [Save wireless remote controller], and press J. The camera will enter pairing mode. Any existing wireless connection to a smart device or computer will end. 2 Keep the power button on the remote control pressed for over three seconds. The camera and remote control will begin pairing.
Connecting to a Paired Remote 1 Go to [Wireless remote (ML‑L7) options] in the camera network menu and select [ON] for [Wireless remote connection (ML-L7)]. 2 Press the remote control power button. The camera and remote will connect automatically.
Software The following Nikon software can be used with the camera. For more information, visit the Nikon website for your country or region. ● Computer Software Nikon computer software is available from the Nikon Download Center. Check the version and system requirements and be sure to download the latest version. https://downloadcenter.nikonimglib.com/ NX Tether: Use for tethered photography when the camera is connected to a computer.
● Smartphone (Tablet) Apps Smartphone (tablet) apps are available from the Apple App Store® and on Google Play™. For the latest information on our apps, visit the Nikon website. SnapBridge: Download photos and videos from the camera to your smart device via a wireless connection. NX MobileAir * (offers in-app purchases): Import pictures from a camera connected to your smart device via USB and upload them wirelessly to an FTP server. * Supported features and operating systems vary by country and region.
Caring for the Camera Long-Term Storage Remove the battery if the product will not be used for an extended period. Before removing the battery, confirm that the camera is off. Do not store the camera in locations that: are poorly ventilated or subject to humidities of over 60%, are next to equipment that produces strong electromagnetic fields, such as televisions or radios, or are exposed to temperatures above 50 °C (122 °F) or below −10 °C (14 °F).
The Monitor Remove dust and lint with a blower. When removing smudges, fingerprints, and other oily stains, wipe the surface lightly with a soft cloth or chamois leather. Do not apply pressure, as this could result in damage or malfunction. Image Sensor Cleaning Dirt or dust entering the camera when lenses are exchanged or the body cap is removed may adhere to the image sensor and affect your photographs. The “clean image sensor” option vibrates the sensor to remove dust.
Cleaning the Image Sensor at Shutdown Option 6 [Clean at shutdown] [Cleaning off] 1 Description The image sensor is automatically cleaned during shutdown each time the camera is turned off. Automatic image sensor cleaning off. Select [Automatic cleaning] for [Clean image sensor]. Pressing 2 when [Automatic cleaning] is highlighted displays [Automatic cleaning] options. 2 Highlight an option. Press J to select the highlighted option.
Manual Cleaning If foreign matter cannot be removed from the image sensor using image sensor cleaning, the sensor can be cleaned manually as described below. Note, however, that the sensor is extremely delicate and easily damaged; we recommend that manual cleaning be performed only by a Nikon-authorized service representative. 1 Turn the camera off and remove the lens. 2 Holding the camera so that light can enter, examine the image sensor for dust or lint.
D Foreign Matter on the Image Sensor Foreign matter entering the camera when lenses or body caps are removed or exchanged (or in rare circumstances lubricant or fine particles from the camera itself) may adhere to the image sensor, where it may appear in photographs taken under certain conditions.
Caring for the Camera and Battery: Cautions Cautions: Using the Camera ● Do Not Drop Do not drop the camera or lens or subject them to blows. The product may malfunction if subjected to strong shocks or vibration. ● Keep Dry Keep the camera dry. Rusting of the internal mechanism caused by water inside the camera can not only be expensive to repair but can in fact cause irreparable damage.
● Lasers and Other Bright Light Sources Do not direct lasers or other extremely bright light sources toward the lens, as this could damage the camera’s image sensor. ● Cleaning When cleaning the camera body, use a blower to gently remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt using a cloth lightly dampened in fresh water and then dry the camera thoroughly.
● Store in a Well-Ventilated Area To prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store the camera with naphtha or camphor moth balls, next to equipment that produces strong electromagnetic fields, or where it will be exposed to extremely high temperatures, for example near a heater or in an enclosed vehicle on a hot day. Failure to observe these precautions could result in product malfunction.
● Monitor/Viewfinder The monitor and viewfinder are constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is not a malfunction. Pictures recorded with the device are unaffected. Your understanding is requested. Pictures in the monitor may be difficult to see in a bright light.
● Bright Lights and Back-Lit Subjects Noise in the form of lines may in rare cases appear in pictures that include bright lights or back-lit subjects. ● Camera Shooting and Playback Displays When [HLG] is selected for tone mode, the shooting and playback displays in the camera monitor and viewfinder may include “noise” in the form of randomly-spaced bright pixels, fog, or lines or may fail to accurately reproduce highlights and highly-saturated colors.
Cautions: Using Batteries ● Precautions for Use If improperly handled, batteries may rupture or leak, causing the product to corrode. Observe the following precautions when handling batteries: - Turn the product off before replacing the battery. - Batteries may be hot after extended use. - Keep the battery terminals clean. - Use only batteries approved for use in this equipment. - Do not short or disassemble batteries or expose them to flame or excessive heat.
● Charge Batteries Before Use Charge the battery before use. The supplied battery is not fully charged at shipment. ● Ready Spare Batteries Before taking photographs, ready a spare battery and keep it fully charged. Depending on your location, it may be difficult to purchase replacement batteries on short notice. ● Have Fully-Charged Spare Batteries Ready on Cold Days Partially-charged batteries may not function on cold days.
Specifications Nikon Z f Digital Camera Type Type Digital camera with support for interchangeable lenses Lens mount Nikon Z mount Lens Compatible lenses Z mount NIKKOR lenses F mount NIKKOR lenses (mount adapter required; restrictions may apply) Effective pixels Effective pixels 24.5 million Image sensor Type 35.9 × 23.9 mm CMOS sensor (full-frame/FX-format) Total pixels 25.
Storage Image size (pixels) [FX (36 × 24)] selected for image area: - 6048 × 4032 (Large: 24.4 M) - 4528 × 3024 (Medium: 13.7 M) - 3024 × 2016 (Small: 6.1 M) [DX (24 × 16)] selected for image area: - 3984 × 2656 (Large: 10.6 M) - 2976 × 1992 (Medium: 5.9 M) - 1984 × 1328 (Small: 2.6 M) [1:1 (24 × 24)] selected for image area: - 4032 × 4032 (Large: 16.3 M) - 3024 × 3024 (Medium: 9.1 M) - 2016 × 2016 (Small: 4.1 M) [16:9 (36 × 20)] selected for image area: - 6048 × 3400 (Large: 20.
Storage Auto, Standard, Neutral, Vivid, Monochrome, Flat Monochrome, Deep Tone Monochrome, Portrait, Rich Tone Portrait, Landscape, Picture Control System Flat, Creative Picture Controls (Dream, Morning, Pop, Sunday, Somber, Dramatic, Silence, Bleached, Melancholic, Pure, Denim, Toy, Sepia, Blue, Red, Pink, Charcoal, Graphite, Binary, Carbon); selected Picture Control can be modified; storage for custom Picture Controls Note: Choice of Picture Controls is restricted to Standard, Monochrome, and Flat when
Viewfinder Viewfinder 1.27-cm/0.5-in. approx. 3690k-dot (Quad VGA) OLED electronic viewfinder with color balance and auto and 13-level manual brightness controls Frame coverage Approx. 100% horizontal and 100% vertical Magnification Approx. 0.8× (50 mm lens at infinity, −1.0 m−1) Eyepoint 21 mm (−1.0 m−1; from rearmost surface of viewfinder eyepiece lens) Diopter adjustment −4 – +2 m−1 Eye sensor Automatically switches between monitor and viewfinder displays Monitor Monitor 8-cm/3.2-in.
Shutter Type Speed Flash sync speed Electronically-controlled vertical-travel focal-plane mechanical shutter; electronic front-curtain shutter; electronic shutter Accessible via shutter speed dial: ¹⁄₈₀₀₀ – 4 s in steps of 1 EV, Bulb, Time, X (flash sync) Accessible via main command dial: ¹⁄₈₀₀₀ – 30 s in steps of ¹⁄₃ EV (extendable to 900 s in mode M), Bulb, Time, X (flash sync) X=¹⁄₂₀₀ s; flash synchronizes with shutter at speeds of ¹⁄₂₀₀ s or slower; faster sync speeds are supported with auto FP high-
Exposure Metering system TTL metering using camera image sensor Matrix metering Center-weighted metering: Weight of 75% given to 12 or Metering mode Range* Mode 8 mm circle in center of frame or weighting can be based on average of entire frame Spot metering: Meters circle with a diameter of approximately 4 mm centered on selected focus point Highlight-weighted metering −4 – +17 EV * Figures are for ISO 100 and f/2.
Autofocus Type Detection range* Lens servo Hybrid phase-detection/contrast AF with AF assist −10 – +19 EV * Measured in photo mode at ISO 100 and a temperature of 20 °C/68 °F using single-servo AF (AF‑S) and a lens with a maximum aperture of f/1.
Flash Flash control TTL: i‑TTL flash control; i‑TTL balanced fill-flash is used with matrix, center-weighted, and highlight-weighted metering, standard i‑TTL fill-flash with spot metering Flash mode Front-curtain sync, slow sync, rear-curtain sync, red-eye reduction, red-eye reduction with slow sync, off Flash compensation −3 – +1 EV in steps of ¹⁄₃ EV Flash-ready indicator Lights when optional flash unit is fully charged; flashes as underexposure warning after flash is fired at full output Accesso
Video Metering system TTL metering using camera image sensor Metering mode Matrix, center-weighted, or highlight-weighted Frame size (pixels) and frame rate 3840 × 2160 (4K UHD): 60p/50p/30p/25p/24p 1920 × 1080: 120p/100p/60p/50p/30p/25p/24p Note: Actual frame rates for 120p, 100p, 60p, 50p, 30p, 25p, and 24p are 119.88, 100, 59.94, 50, 29.97, 25, and 23.976 fps respectively. File format MOV, MP4 Video compression H.265/HEVC (8 bit/10 bit), H.
Video Active D‑Lighting Extra high, High, Normal, Low, and Off Time-lapse video recording, electronic vibration reduction, time codes, N-Log and HDR (HLG) video, wave-form display, red REC Other options frame indicator, video recording display zoom (50%, 100%, and 200%), and extended shutter speeds (modes S and M); option to view video recording info available via i menu Playback Playback Full-frame and thumbnail (up to 4, 9, or 72 pictures) playback with playback zoom, playback zoom cropping, video p
Wi-Fi/Bluetooth Standards: - IEEE 802.11b/g/n (Africa, Asia, and Oceania) - IEEE 802.11b/g/n/a/ac (Europe, Americas) Operating frequency: - 2412–2462 MHz (channel 11; Africa, Asia, and Oceania) - 2412–2462 MHz (channel 11) and 5180–5825 MHz (5180– Wi-Fi Bluetooth 5580 MHz, 5660–5700 MHz, and 5745–5825 MHz) (U.S.A.
Power source One EN‑EL15c rechargeable Li-ion battery * * EN‑EL15b and EN‑EL15a batteries can be used in place of the Battery AC adapter EN‑EL15c. Note, however, that fewer pictures can be taken on a single charge than with the EN‑EL15c. EH-8P AC adapters can be used to charge EN‑EL15c and EN‑EL15b batteries only. EH‑7P charging AC adapters (available separately) EH-8P AC adapters (available separately); supplied UC‑E25 USB cable required Tripod socket Tripod socket 0.635 cm (¹⁄₄ in.
Dimensions/weight Dimensions (W × H × D) Approx. 144 × 103 × 49 mm/5.7 × 4.1 × 2 in. Weight Approx. 710 g (1 lb. 9.1 oz.) with battery and memory card but without body cap and accessory shoe cover; approx. 630 g / 1 lb. 6.3 oz. (camera body only) Operating environment Temperature 0 °C– 40 °C (+32 °F – 104 °F) Humidity 85% or less (no condensation) Unless otherwise stated, all measurements are performed in conformity with Camera and Imaging Products Association (CIPA) standards or guidelines.
EN‑EL15c Rechargeable Li-ion Battery Type Rechargeable lithium-ion battery Rated capacity 7.0 V, 2280 mAh Operating temperature 0 °C–40 °C (+32 °F–104 °F) with Z f Dimensions (W × H × D) Approx. 40 × 56 × 20.5 mm/1.6 × 2.3 × 0.9 in. Weight Approx. 80 g (2.9 oz), excluding terminal cover D Cautions: Disposing of Data Storage Devices Please note that deleting pictures or formatting memory cards or other data storage devices does not completely erase the original image data.
Approved Memory Cards The camera can be used with SD, SDHC, SDXC, microSD, microSDHC, and microSDXC memory cards. UHS‑I and UHS‑II SD memory cards are supported. microSDHC and microSDXC memory cards are UHS‑I compliant. UHS Speed Class 3 or better SD memory cards are recommended for video recording and playback. UHS Speed Class 3 or better SD memory cards with a maximum data transfer rate of at least 250 MB/s are recommended for recording and playback of videos with a high frame size or rate.
Portable Chargers (Power Banks) Portable chargers can be used to power the camera or charge the camera battery. The following table lists the portable chargers that have been tested and approved for use, together with the approximate number of shots that can be taken with, and the approximate number of times the camera battery can be charged using, each device. Manufacturer Model number Number of shots Number of charges * Anker PowerCore III Elite 25600 87W Approx.
Memory Card Capacity The following table shows buffer capacity and the approximate number of pictures that can be stored on a 32 GB 1 card at different image qualities ( 0 110), and sizes ( 0 112) with [FX (36 × 24)] selected for [Choose image area] and [SDR] selected for [Tone mode]. Actual capacity varies with shooting conditions and the type of card.
Image quality JPEG/HEIF basic 4 Image size File size Number of exposures remaining 2 Large Approx. 2.8 MB 7000 frames Medium Approx. 2.0 MB 11,300 frames Small Approx. 1.1 MB 19,900 frames Buffer capacity 2, 3 Over 200 frames 1 Figures are for a SanDisk SD memory card (SDSDXPK-032G-JNJIP, measured in June 2023) with a NIKKOR Z 50mm f/1.8 S lens mounted on the camera. 2 The number of pictures that can be saved to the memory card or stored in the memory buffer varies with the scene recorded.
Memory Card Capacity (Videos) The following table shows the approximate length of footage that can be stored on a 256 GB * card with different options selected for [Frame size/frame rate] ( 0 189) in the video recording menu when [H.265 8-bit (MOV)] is selected for [Video file type]. Each shot can be up to 125 minutes in length. Actual capacity varies with shooting conditions and the type of card.
Battery Endurance The video footage or number of shots that can be recorded with a fully-charged EN‑EL15c rechargeable Li-ion battery 1 is given below. 2 Actual endurance varies with such factors as the condition of the battery, the interval between shots, and the options selected in the camera menus. Photo Mode (Single Frame): Number of Shots 3 [Viewfinder only] selected for monitor mode with: - [ON] selected for [Energy saving (photo mode)] in the setup menu: Approx.
To ensure that you get the most from rechargeable Nikon EN‑EL15c batteries: Keep the battery contacts clean. Soiled contacts can reduce battery performance. Use batteries immediately after charging. Batteries will lose their charge if left unused. 1 EN‑EL15b and EN‑EL15a batteries can be used in place of the EN‑EL15c. Note, however, that fewer pictures can be taken on a single charge than with the EN‑EL15c. 2 Measured at 23 °C/73.4 °F (±2 °C/3.6 °F) with a SanDisk SDSDXPK-032G-JNJIP memory card.
Trademarks and Licenses The SD, SDHC, SDXC, microSD, microSDHC, and microSDXC logos are trademarks of SD-3C, LLC. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Apple®, App Store®, the Apple logos, iPhone®, iPad®, Mac, and macOS are trademarks of Apple Inc. registered in the U.S. and/or other countries. Android, Google Play and the Google Play logo are trademarks of Google LLC.
D FreeType License (FreeType2) Portions of this software are copyright © 2012 The FreeType Project (https://www.freetype.org). All rights reserved. D MIT License (HarfBuzz) Portions of this software are copyright © 2018 The HarfBuzz Project (https://www.freedesktop.org/ wiki/Software/HarfBuzz). All rights reserved.
D Unicode® Character Database License (Unicode® Character Database) The software for this product uses the Unicode® Character Database License open-source software. The terms of the software license are as follows: COPYRIGHT AND PERMISSION NOTICE Copyright © 1991–2023 Unicode, Inc. All rights reserved. Distributed under the Terms of Use in https://www.unicode.org/copyright.html.
D AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) (ii) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
Notices ● Notices for Customers in the U.S.A. Federal Communications Commission (FCC) Radio Frequency Interference Statement Zf This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
● Notice for Customers in Canada CAN ICES-003(B) / NMB-003(B) ● Notices for Customers in Europe CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. This symbol indicates that electrical and electronic equipment is to be collected separately. The following apply only to users in European countries: This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
Bluetooth and Wi-Fi (Wireless LAN) This product is controlled by the United States Export Administration Regulations (EAR). The permission of the United States government is not required for export to countries other than the following, which as of this writing are subject to embargo or special controls: Cuba, Iran, North Korea, Sudan, and Syria (list subject to change). The use of wireless devices may be prohibited in some countries or regions.
FCC Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Compliance with RSS-247 Issue 2 §6.4 Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted.
● Notice for Customers in Europe and in Countries Complying with the Radio Equipment Directive Hereby, Nikon Corporation declares that the radio equipment type Z f is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://imaging.nikon.com/imaging/support/pdf/DoC_N2137.pdf For this radio equipment, 5150–5350 MHz band is restricted to indoor operations only.
● Notice for Customers in Europe Standby Power Consumption Mode Power consumption Off mode Less than 0.5 W Networked standby mode (Bluetooth connections) Less than 2 W ● Notice for Customers in the UK Hereby, Nikon Corporation declares that the radio equipment type Z f is in compliance with Radio Equipment Regulations 2017. The full text of the UKCA declaration of conformity is available at the following internet address: https://imaging.nikon.com/imaging/support/pdf/UKCA_DoC_N2137.
● Notice for Customers in Singapore Trade Name: Model: Z f This device complies with radio-frequency regulations. The content of certification labels not affixed to the device is given below.
● Security Although one of the benefits of this product is that it allows others to freely connect for the wireless exchange of data anywhere within its range, the following may occur if security is not enabled: Data theft: Malicious third-parties may intercept wireless transmissions to steal user IDs, passwords, and other personal information. Unauthorized access: Unauthorized users may gain access to the network and alter data or perform other malicious actions.
Index Index Symbols, Numerics A b(Auto) (0 95, 0 100) P (Programmed auto) (0 132) S (Shutter-priority auto) (0 132) A (Aperture-priority auto) (0 134) M (Manual) (0 135) U (Single frame) (0 145) V (Continuous L) (0 145) W (Continuous H) (0 145) X (Continuous H (extended)) (0 145) A (C30) (0 145) E (Self-timer) (0 145, 0 151) 3 (Pinpoint AF) (0 116) d (Single-point AF) (0 116) d (Dynamic-area AF (S)) (0 117) e (Dynamic-area AF (M)) (0 117) f (Dynamic-area AF (L)) (0 117) AC adapter (0 86) Access-point mod
Auto ISO sensitivity control (0 155) Auto rotate info display (0 680) Auto temperature cutout (0 688) Auto-area AF (0 118) Autoexposure lock (0 141) Auto-rotate pictures (0 662) B Basic information (0 203) Battery (0 82) Battery info (0 710) Bluetooth (0 290) Bracketing order (0 585) Brightness information display (0 644) Built-in AF-assist illuminator (0 542) Built-in microphone (0 101) Bulb (Long time-exposures) (0 138) Burst photography (0 145) Connect to FTP server (0 736) Connect to other cameras (0
Dynamic-area AF (M) (0 117) Dynamic-area AF (S) (0 117) E Easy exposure compens (0 547) Editing videos (0 269) Electronic VR (0 512) Energy saving (photo mode) (0 713) Exposure comp.
H HDMI (0 280) HDR overlay (0 444) Headphone volume (0 518) Hi (ISO sensitivity) (0 154) High ISO NR (0 402, 0 499) High sensitivity (Hi) (0 154) Highlight display (0 204) High-speed frame capture (0 149) High-speed frame capture mode (0 556) HLG (0 195) HLG quality (0 497) HLG video (0 195) I Image area (0 108, 0 192) Image comment (0 693) Image Dust Off ref photo (0 690) Image frame (0 570) Image quality (0 110) Image size (0 112) Incandescent (White balance) (0 158) Infrastructure mode (0 308, 0 322) In
N Press the shutter-release button halfway (0 97) Primary slot selection (0 378) Programmed auto (0 132) Protect (0 223) Natural light auto (White balance) (0 158) Network menu (0 722) Neutral (Set Picture Control) (0 176) N‑Log (0 197) Non-CPU lens data (0 685) NX Studio (0 298) Q Quick crop (0 215) O R Overlay (add) (0 262) Overview (0 212) Rating (0 225) RAW processing (0 241) RAW recording (0 389) Recent settings (0 757) Rechargeable Li-ion battery (0 86) Red REC frame indicator (0 648) Release bu
S T Save focus position (0 686) Save zoom position (PZ lenses) (0 687) Save/load menu settings (0 715) Secondary slot function (0 379) Select for upload (0 227) Self-portrait mode (0 49, 0 706) Self-timer (0 145, 0 151, 0 552) Series playback (0 658) Set Picture Control (HLG) (0 394) Setup menu (0 668) Shade (White balance) (0 158) Shooting data (0 207) Shooting mode (0 131) Shutter speed (0 132, 0 135) Shutter type (0 559) Shutter-priority auto (0 132) Shutter-release button AE-L (0 551) Shutter-speed di
W Warm display colors (0 567) WB bracketing (0 429) White balance (0 157) Wide-area AF (C1) (0 118) Wide-area AF (C2) (0 118) Wide-area AF (L) (0 117) Wide-area AF (S) (0 117) Wi-Fi mode (0 294) Wind noise reduction (0 516) Wireless LAN (0 302) Wireless remote (ML-L7) options (0 729) Wireless Transmitter Utility (0 302) Z Zebra pattern (0 640) 878 Index
No reproduction in any form of this document, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
