Reference Manual

Obtain or select an IP address.
Highlight one of the following options and pr
ess J.
Highlight [Group name], press 2, and enter a gr
oup name.
Enter a group name for the synchronized cameras. Group
names can be up to eight characters long.
All master and remote cameras on the network must be in
the same group.
Option Description
[Obtain automatically]
Select this option if the netw
ork is configured to supply the IP
address automatically. A “configuration complete” message will be
displayed once an IP address has been assigned.
It is recommended that you note the remote camera IP
address, as you will need it in subsequent steps.
[Enter manually]
Ent
er the IP address and sub-net mask manually.
Press
J; you will be prompted to enter the IP address.
Rotate the main command dial to highlight segments.
Press 4 or 2 to change the highlighted segment and press J
to save changes.
Next, press X; a “configuration complete” message will be
displayed. Press X again to display the sub-net mask.
Press 1 or 3 to edit the sub-net mask and press J; a
“configuration complete” message will be displayed.
Press J
to proceed when the “configuration complete” message is displayed.
The pr
ofile name is displayed when a connection is established.
347
Synchronized Release
7
8
9