Reference Manual

Role Description
9
[ISO sensitivity]
When the ISO sensitivity dial is rotated to C, ISO sensitivity
can be adjusted either by holding the contr
ol and rotating a
command dial or by rotating the lens control ring.
m
[White balance]
Hold the control and rotate the main command dial to adjust
white balance for videos. Some options offer sub-options that
can be selected by rotating the sub-command dial.
h
[Set Picture Control]
Press the control and rotate a command dial to choose a
Picture Control.
y
[Active D-Lighting]
Press the control and rotate a command dial to adjust Active
D-Lighting for videos.
h
[Skin softening]
Press the control and rotate a command dial to adjust skin
softening.
i
[Portrait impression
balance]
Press the control and rotate a command dial to choose a
portrait impression balance mode.
w
[Metering]
Press the control and rotate a command dial to choose a
metering option for use during video recording.
z
[Focus mode/AF-
area mode]
Hold the control and rotate the main command dial to choose
the focus mode, the sub-command dial to choose the AF-area
mode.
9
[Focus-point lock]
To lock focus-point selection, hold the control while using the
multi selector to choose the focus point.
H
[Microphone
sensitivity]
Press the control and rotate a command dial to adjust
microphone sensitivity.
X
[Focus (M/A)]
The lens control ring can be used for manual focus regardless
of the option selected for focus mode. To refocus using
autofocus, press the shutter-release button halfway or press a
control to which AF-ON has been assigned.
q
[Power aperture] Rotate the lens control ring to adjust aperture.
[None] The control has no effect.
630
g2: Custom Controls