Reference Guide (PDF Edition)

C
The photo shooting menu: Shooting options
275
D Bracketing options
When [AE & ash br
acketing] is selected, the camera varies both exposure
and ash level. Select [AE bracketing] to vary only exposure, [Flash
bracketing] to vary only ash level. Note that ash bracketing is available in
i-TTL and, where supported, auto aperture (
q
A) ash control modes only
(0499, 0543).
D Exposure and ash br
acketing
･ In continuous release modes, shooting will pause after the number of
shots specied in the bracketing program have been taken. Shooting will
resume the next time the shutter-release button is pressed.
･ If the camera is turned o before all shots in the sequence have been
taken, bracketing will resume from the rst shot in the sequence when
the camera is turned on.
･ If the memory card lls before all shots in the sequence have been taken,
shooting can be resumed from the next shot in the sequence after the
memory card has been replaced.
D Exposure bracketing
The settings (shutter speed and/or aperture) altered during exposure
br
acketing vary with the shooting mode.
Mode Setting
P Shutter speed and aperture
1
S Aperture
1
A Shutter speed
1
M Shutter speed
2, 3
1 If [O
n] is selected for [ISO sensitivity settings] > [Auto ISO sensitivity
control] in the photo shooting menu, the camera will automatically vary
ISO sensitivity for optimum exposure when the limits of the camera
exposure system are exceeded.