Reference Guide (PDF Edition)

Table Of Contents
Camera controls
52
Self-portrait mode
When the monitor is facing the front of the camera, the camera changes
t
o self-portrait mode (052).
D Precautions for the monitor
W
hen rotating the monitor, rotate slowly within the allowable range.
Applying excessive force will result in damage to the camera body and
monitor.
When you are not using the monitor, turning it facing inward and setting
it in the camera body is recommended to prevent damage and dirt.
Do not carry the camera by holding the monitor. This could result in
damage to the camera.
Shooting in self-portrait mode
If the monitor is set to the self-portrait mode position, it will switch to
self-portrait mode.
The monitor will display an image as if it were reected on a mirror
(inverted image), but the actual image is saved from the perspective of
the camera.
I
n self-portrait mode, you can tap the monitor to set the self-timer.