Reference Guide (PDF Edition)

Inserting the battery and a memory card
77
･ T
he battery level display changes as the battery level diminishes,
from
L
through
K
, and
H
. When the battery level falls to
H
,
suspend shooting and charge the battery or ready a spare battery.
･ If the message [Shutter release disabled. Recharge battery.] is
displayed, charge or exchange the battery.
D The standby timer
The camera uses a standby timer to help reduce the drain on the battery. If
no oper
ations are performed for about 30 seconds, the standby timer will
expire and the monitor, viewnder, and control panel will turn o. A few
seconds prior to turning o, the displays will dim. They can be reactivated by
pressing the shutter-release button halfway. The length of time before the
standby timer expires automatically can be selected using Custom Setting c3
[Power o delay] > [Standby timer].
Number of exposures remaining
･ W
hen the camera is on, the shooting display shows the number of
photographs that can be taken at current settings.
･ Values over 1000 are rounded down to the nearest hundred. For
example, values between 1500 and 1599 are shown as 1.5 k.
Monitor Viewnder