Speaker - Loudspeaker User Manual

4. Pull the ends of the security cable with the loops as tight as you can until the knot
around the security eyelet is tightened as shown in
Figure 11.
5. Feed the Security Stake through the loops at the end of the security cable and
insure that they are inserted into the cable holder provided at the top of the stake,
as shown in
Figure 12.
6. Pick a spot in the ground which the loudspeaker will cover and drive the security
stake all the way into the ground until the cable holder is completely under the
surface of the ground, as shown in
Figure 13.
7. Pull on the security cable and verify that the stake is securely held in the ground.
INSTALLATION
14
Figure 12 Security Stake
Attachment to Cable
Figure 11 Security Cable
Connected and Tightened
Figure 13 Security Stake
Driven into Ground