Owner's Manual

INTRODUCTION
The MS120 is a flush-mount IR sensor designed for
use with the Niles infrared extender systems.
Installed in a remote room location, the MS120
receives the IR commands transmitted from your
existing hand-held remotes in that room. The
commands are carried via a CAT-5 cable to your
AN equipment in another room, and instantly
II repeated" .
The MS120 is compatible with all current Niles
infrared systems. It may be used along with, or as
an alternative to, the Niles TS120, WS120, MS120,
MS220 and CS120 sensors or the InteIliPad®.
The MS120 is just one part of the three building
blocks necessary to complete a Niles IR repeating
system:
• IR Main System Unit-Models MSU140,
MSU250,
MSU480 and MSU440Z.
• IR Sensors/Keypads-Models WS120, TS120,
MS120, MS220, CS120, and the IntelliPad .
•
IR Flashers-Models MF1, MF1VF, MF2, MF2VF
and the IRB 1.
An IR sensor expansion hub, ModellRH61 0, is
available to provide additional sensor inputs to your
system.
IMPORTANT: Refer installation to a professional
custom installer if you are unfamiliar with any of
the following procedures.
1
FEATURES & BENEFITS
The MS120 offers a number of improvements over
other miniature IR sensors.
• Wideband High-Fidelity Design enables
operation with virtually any brand of equipment
• Patent Pending Universal Noise Suppression
Design enables operation in virtually any
environment: near plasma and LCD displays,
compact fluorescent lights, and indirect sunlight
• Excellent IR receiving range - 20' to 35'of
remote control range (depending upon the
strength of your handheld remote)
• Small size of only 1/2" diameter by 2-7/8"
long-fits
almost anywhere
• 10' connecting cable included
• Printed circuit board design uses surface mount
technology, assuring high reliability
• Ideal for both home and commercial installations
• Two year parts and labor limited warranty
2