RWE R e a r Wav e E n c l o s u r e I NS T A l l a ti o n DS00722A-0-Rear Wave Enclosure.
CONGRATULATIONS! Thank you for choosing the Niles RWE7C/RWE8C Rear Wave Enclosure. Niles manufactures the industry’s most comprehensive line of custom installation components and accessories. For information on our complete product assortment, please visit us at: www.nilesaudio.com. INTRODUCTION The Niles RWE7C/RWE8C is a retrofittable rear wave enclosure that delivers highquality, predictable sound performance, while reducing unwanted sound from bleeding into adjacent areas and rooms.
r d INSTALLING THE REAR WAVE ENCLOSURE 1. L ocate the red (+) and black (–) speaker wire jumpers inside the Rear Wave Enclosure. 2. A ttach the red (+) wire to red (+) spring loaded wire terminal on the loudspeaker. Attach the black (–) wire to black (–) spring loaded wire terminal on the loudspeaker. For more information on connecting speaker wire, consult the loudspeaker’s Installation Guide. 3. L ocate the set screw hole at the end of the open area of the Rear Wave Enclosure.
1-800-BUY-HIFI – 1-305-238-4373 – www.nilesaudio.com ©2010 Niles Audio Corporation. All rights reserved. Niles, the Niles logos, and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation. All other trademarks are the property of their respective owners. Designed and Engineered in the USA. Made in China. DS00722A DS00722A-0-Rear Wave Enclosure.