Installation Instructions

Nilfisk A/S
Industrivej 1 Switchboard Confidential 19.01.2021/
DK-9560 Hadsund [phone] , Page 4 of 5
Denmark
Connections
Use counterpart: ITT CTC 132015-0075
ITT CTC
connector
pin #
Signal name
Description
Wire color
1
GND
GND (0V)
Dark Green
2
UART_TX
TX signal for NEO1 UART (cross to RX)
Red
3
UART_RX
RX signal for NEO1 UART (cross to TX)
Black
4
GND
GND (0V)
Light Green
5
NC
Not connected
6
Analog In1
Analog input for sensor / measurement
Orange
7
Analog In3
Analog input for sensor / measurement
Yellow
8
Analog In5
Analog input for sensor / measurement
Yellow / Black
9
Analog In6
Analog input for sensor / measurement
Pink
10
Digital Out 1
Digital output for i.e. disabling machine
White / Blue
11
B+ (8 – 58V in)
Main power input
Brown / Black
12
B+ (8 – 58V in)
Main power input
Red / Black
13
GND
GND (0V)
Light Green
14
5V in
5V power input (alternative to Main power input)
Blue
15
5V in
5V power input (alternative to Main power input)
Blue / Black
16
GND
GND (0V)
Green / Blue
17
Key Switch
Key switch signal to activate module
White
18
Analog In2
Analog input for sensor / measurement
Orange / Black
19
Analog In4
Analog input for sensor / measurement
Red / Blue
20
NC
Not connected
21
Analog In7
Analog input for sensor / measurement
Pink / Black
22
M_BAT_WKUP
Wake-up signal for Nilfisk Li-ion battery
Grey / Black
23
CAN H
CAN interface
Yellow / Blue
24
CAN L
CAN interface
Grey