AX 300 / AX 400 Instructions For Use Nilfisk MODELS 56264400, 56262170, 56262171 56264401, 56262175, 56262174 56262054 56262055, 56262213, 56262214, 56264466 English 4/04 Form Number 56041590
Table of Contents Page INTRODUCTION Introduction ........................................................................ 2 Parts and Service .............................................................. 2 Nameplate ......................................................................... 2 Unpacking the Machine ..................................................... 2 This manual will help you get the most from your Nilfisk AX 300/ 400. Read it thoroughly before operating the machine.
IMPORTANT SAFETY INSTRUCTIONS This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices other than normal residential housekeeping purposes. When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. WARNING! To reduce the risk of fire, electric shock, or injury: • • • • • • • • • • • • • • • • • Do not leave the appliance when it is plugged in.
IMPORTANTES MESURES DE SÉCURITÉ Cette machine ne convient qu´à un usage industriel, par exemple dans des hôtels, écoles, hôpitaux, usines, boutiques et bureaux et autres à l´exclusion de tout usage de maintenance résidentielle normale.
1 2 3 4 5 6 standard black carpet (optional) blue smooth surface (optional) gray 500 light grit (optional) gray 240 grout grit Select the correct brush for your cleaning application. 7 8 FORM NO.
1 2 3 4 Remove wheel 5 6 7 8 6 - FORM NO.
1 2 3 4 Slide wheel on 5 6 7 8 FORM NO.
1 2 Read the cleaning chemical label and figure the proper amount of chemical for your machine. 3 4 AX 300 15 litres (4 gallons) AX 400 30 litres (8 gallons) 5 6 MAX TEMP 60° C 140° F 7 8 1" 2.5 cm 8 - FORM NO.
1 3 2 4 5 Start the vacuum Start the brush 6 To adjust the brush on carpet, first turn the knob to the LEFT to LOWER the brush until the light comes on. 7 Then turn the knob to the RIGHT to RAISE the brush until the light just turns off. The machine will help propel itself (on carpet) when the brush is properly adjusted. FORM NO.
8 10 Overlap 2" (5 cm) on each pass. 10 - FORM NO.
1 2 Turn machine OFF. 3 4 5 6 7 8 FORM NO.
MAINTENANCE SCHEDULE MAINTENANCE ITEM Clean the Brush Clean the Pick-Up Tool Check the Power Cord Clean the Spray Nozzle Lubricate the Machine Check the Vacuum Motor Airways *Check the Vacuum Motor Brushes WEEKLY X X X MONTHLY YEARLY X X X X *Have Nilfisk check the carbon motor brushes once a year or after 500 operating hours. STORING THE MACHINE Store the machine indoors in a clean, dry place. Keep from freezing. Leave the tanks open to air them out..
LUBRICATION Once a month, wipe the solution valve with a clean cloth. Then use a spray silicone lubricant on all pivot points associated with the valve assembly, especially the valve plunger. Once a month, lubricate the pivot points of the handle and the wheel axles. Wipe off any excess to avoid staining floor surfaces. Valve Plunger The Solution Valve Assembly is located on the bottom of the machine. VACUUM MOTOR MAINTENANCE Once a month, check the vacuum motor to make sure the airways are not blocked.
OPTIONAL HARD FLOOR KITS The AX 300 and 400 come standard with a carpet tool. Optional hard floor kits include a squeegee, squeegee mount, support wheel and solution adjustment valve. Brushes for hard floor use are not included in these kits and must be ordered separately. DESCRIPTION AX 300 AX 400 Hard Floor Kit** ................................................................... 56264369 ............. 56262164 ** Kits do not include brushes.
Austria (Sales Sub) Nilfisk-Advance GmbH Voralberger Allee 46 A-1230 Wien info@nilfisk-advance.at www.nilfisk-advance.at Belgium (Sales Sub) Nilfisk-Advance NV/SA Doornveld Sphere Business Park Industrie Asse 3, No. 11 B-1731 Zellik-Asse www.nilfisk-advance.be Czech Republic (Sales Sub) Nilfisk-Advance s.r.o. Lysinská 44/1863 143 00 Praha - Modrany Czech Republic Denmark Nilfisk-Advance A/S Sognevej 25 DK-2605 Brøndby mail@nilfisk-advance.dk www.nilfisk-advance.com Denmark (Prod.
Sweden (Prod.) Nilfisk-Advance A/S Åmål Branch Strömsbergsgatan Box 127 S-662 23 Åmål Switzerland (Sales Sub) Nilfisk-Advance AG Ringsstrasse 19 Kirchberg/Industrie Stelzl CH-9500 Wil www.nilfisk-advance.ch UK (Sales Sub) Nilfisk-Advance Limited Newmarket Road Bury St. Edmunds UK-Suffolk IP33 3SR USA (Prod.) Nilfisk-Advance Inc. 14600 21.st Avenue North Plymouth, MN 55447-3408 www.mn.nilfisk-advance.com USA (Sales Sub) Nilfisk-Advance America Inc. 300 Technology Drive Malvern, PA 19355 www.pa.
_____________________________________________________ TYPE: AX300, AX400 EU Overensstemmelseserklæring DK Tæpperensemaskine Maskinen er fremstillet i overensstemmelse med følgende direktiver: Maskindirektiv: 98/37/EØF EMC-direktiv: 89/336/EØF 92/31/EØF 93/68/EØF 98/13/EOF Lavspændingsdirektiv: 73/23/EØF 93/68/EØF Harmoniserede standarder: EN 60 335-2-67 EU Överensstämmelseförsäkran S, FIN Golvvårdsmaskin Maskinen är tillverkad i överensstämmelse med följande direktiver: Maskindirektiv: 98/37/EEG EMC-direkt
ES atbilstības deklarācija LV Šļakatu ekstrakcijas mašīna Šī mašīna izgatavota atbilstoši šādām direktīvām un standartiem: Mašīnu direktīva: 98/37/EEC Elektromagnētiskās savietojamības (EMC) direktīva: 89/336/EEC 92/31/EEC 93/68/EEC 98/13/EEC Zemsprieguma direktīva: 73/23/EEC 93/68/EEC Saskaņotie standarti: EN 60 335-2-67 Deklaracija EU o skladnosti SL Stroj za razprševanje čistila Ta stroj je izdelan v skladu z naslednjimi smernicami in standardi: Smernica o strojih: 98/37/EEC Smernica o elektromagnetni zd
www.nilfisk-advance.
