Operating instructions NEPTUNE PE/DE 106269015 d
Operating Instructions ............................................................................................. 1-19 Betriebsanleitung ................................................................................................... 20-38 Notice d’utilisation.................................................................................................. 39-57 Gebruiksaanwijzing ...............................................................................................
NEPTUNE PE/DE Contents Symbols used to mark instructions 1 Important safety instructions ........................................................................................................2 ........................................................................................................2 2 Description 2.1 2.2 Purpose ................................................................................4 Operating elements .............................................................
NEPTUNE PE/DE Symbols used to mark instructions Before using the high-pressure cleaner, be sure to also read the enclosed operating instructions and keep them within reach at all times. Safety instructions in these operating instructions which must be observed to prevent risks to persons are marked with this danger symbol. This indicates tips and instructions to simplify work and to ensure safe operation.
NEPTUNE PE/DE NOTE! The maximum permissible working pressure and temperature are printed on the highpressure hose. Do not use the cleaner if the high-pressure hose or the equipment is damaged. cal Guidelines for Inflammable Fluids“ applicable at the point of use due to the potential explosion hazard posed by the burner. Ensure adequate air circulation. Do not cover the cleaner or operate it in inadequately ventilated rooms! CAUTION! Do not touch or cover the exhaust. Risk of burns and fire.
NEPTUNE PE/DE 2 Description 2.1 Purpose This high-pressure cleaner has been designed for professional use in - 2.2 Operating elements Agriculture Industry Transport industry Automotive Municipal Facilities Janitorial Contruction Food industry See illustration at front of these operating instructions. 1. Water inlet and filter (quickcoupler for supply hose) 2. Pump oil level inspection and fill cup 3. Fuel filling cap 4. Burner coil 4 etc.
NEPTUNE PE/DE 3 Before starting the machine 3.1 Transport and assembly the burner may be necessary to take account of altitude and the resulting air pressure. This is true whether your fuel is ‘Natural gas’, Propane or Diesel. 1. The safest way to lift the machine is to use a fork-lift truck The arrows in the illustration indicate the best places to position the fork. Every fuel-burning appliance, such as pressure washers, depends upon a proper mix of fuel and air (by weight) for proper combustion.
NEPTUNE PE/DE added (available from the fuel oil trade). Filling up the engine with fuel, see the enclosed instructions for the engine. 3.4 Connecting the high pressure hose 1. Connect the high pressure hose quick connector to the high pressure nipple. 3.5 Connecting the water supply 1. Attach hose coupling found with Owners Manual to the water supply hose. 2. Rinse the water supply hose briefly in order to prevent sand an other dirt particles entering into the machine. 3.
NEPTUNE PE/DE 4 Control / Operation 4.1 Connections 4.1.1 Connecting the spray lance to the spray gun 1. Pull the blue quick-release grip (A) of the spray gun backwards. 2. Insert the nipple of the spray lance (B) into the quick-release connection and release it. 3. Pull the spray lance (or other accessory) forwards to check that it is securely attached to the spray gun. NOTE! Always remove any dirt from the nipple before connecting the spray lance to the spray gun. 4.
NEPTUNE PE/DE 4.3 Switching on the cleaner 4.3.1 Cold water operation Before starting up the engine, you must carefully read through the instructions for use of the engine. In the instructions for use the operation and service of the engine is described. When the engine has been started, the high pressure washer can be used for cleaning with cold water. 4.3.2 Hot water operation 6 4.4 Pressure regulation (Tornado Lance) 1. Turn the switch to the required temperature.
NEPTUNE PE/DE 5 Applications and methods 5.1 Techniques Efficient high pressure cleaning is achieved by following a few guidelines, combined with your own personal experience of specific cleaning tasks. Accessories and detergents, when correctly chosen, can increase the efficiency of your pressure washer. Here is some basic information about cleaning. 5.1.1 Soaking Encrusted or thick layers of dirt can be loosened or softened up by a period of soaking.
NEPTUNE PE/DE 5.2 Some typical cleaning tasks 5.2.1 Agriculture Task Accessories Method Stables Pig Pens, Sties Chemical Foam Injectors Foam lance Powerspeed lance Floor Cleaner 1. Soaking – apply foam to all surfaces (bottom to top) and wait for approx. 30 minutes. 2. Remove the dirt from surfaces with the high pressure lance or chosen accessory. Again, clean from bottom to top on vertical surfaces. 3.
NEPTUNE PE/DE 5.2.3 Buildings and Equipment Task Accessories Method General surfaces Foam injectors Stand- 1. Apply thick foam over the surfaces to be cleaned. ard lance Apply on dry surfaces. Apply from top to bottom on Metallic equipment Curved lances vertical surfaces. Let the foam act for up to 30 minTank cleaning utes for the optimal effect. head 2. Proceed with cleaning using the high pressure lance. Use applicable accessories.
NEPTUNE PE/DE 6 After using the cleaner 6.1 Switching off the cleaner 6.2 Storing / frost protection 1. Close water tap 2. Activate spray handle without lance in order to empty all residual water in the system. 3. Turn the ON/OFF switch to position “OFF”. 4. Turn off the engine. 5. Activate spray handle until the washer is depressurised. 6. Lock the safety catch on the spray handle. It is advisable to store the machine in a frost proof place between operations.
NEPTUNE PE/DE 7 Maintenance 7.1 Maintenance Schedule Weekly NEPTUNE 5-51 DE / 5-85 PE only After the first 50 operating hours Every six months or 500 operating hours As required 7.2.1 Water filters 7.2.2 Oil filter 7.2.3 Checking the pump oil quality 7.2.4 Changing the pump oil 7.2.5 Emptying the fuel oil tank 7.2.6 Flame Sensor Service on engine: See attached user instructions for engine. 7.2 Maintenance work 7.2.1 Water filters 1. Unscrew quick coupling. 2.
NEPTUNE PE/DE 7.2.3 Change of oil NEPTUNE 5: 1. Loosen oil container by opening the clip. Hold the oil container into a container until all oil has run out of the pump. 2. Remount oil container and top up with new oil. It may take some time for the oil level to equalize in the pump and the oil container. A NEPTUNE 7: 1. Unscrew the oil drain plug (A) and drain oil into a suitable container. 2. Check that the drain plug gasket is in place and reinstall drain plug. 3.
NEPTUNE PE/DE 7.2.6 Flame sensor Original Instructions 1. Remove the sensor and clean with a soft cloth. 2. Confirm that the sensor is correctly seated when reinstalling.
NEPTUNE PE/DE 8 Troubleshooting 8.1 Indications on Display Indication light Green LED ON Yellow LED ON Cause Remedy > Appliance ready for operation. When switching on, all the LEDs light up once.
NEPTUNE PE/DE Indication light Cause Green LED flashes slowly and red LED flashes rapidly 8.2 > Flame sensor sooted > Ignition or fuel system failure Remedy • Clean flame sensor (see section 7.2.6).
NEPTUNE PE/DE 9 Further information 9.1 9.2 9.3 Recycling the machine Warranty Make the old cleaner unusable immediately. valuable materials that should be recycled. 1. Unplug the cleaner and cut the power cord. The pressure washer contains Contact your local waste disposal site. If you have any queries, please contact your local authorities or your nearest dealer.
NEPTUNE PE/DE 9.4 Technical Specifications Item no. NEPTUNE 5-46 PE NEPTUNE 5-54 PE NEPTUNE 7-61 PE NEPTUNE 5-85 PE NEPTUNE 5-51 DE NEPTUNE 7-66 DE NEPTUNE 7-72 DE 106239510 106239515 106239530 106239540 106239610 106239630 106239635 Pump pressure bar 200 220 220 240 200 200 220 mQuic l/h 800 900 1010 1350 900 1150 1200 Qmax l/h 860 1000 1120 1450 1000 1200 1300 0400 0450 0500 0650 0450 0640 0640 1.5 1.5 5.0 1.5 1.5 1.5 5.
NEPTUNE 5-46 PE 3 4 NEPTUNE 5-54 PE 3 1 10 4 1 10 8 8 2 2 5 5 6 NEPTUNE 7-61 PE 4 3 1 8 10 6 2 5 6 NEPTUNE 5-85 PE 4 1 4 3 8 10 2 5
NEPTUNE 5-51 DE 6 10 1 3 8 4 2 7 9
HEAD QUARTER DENMARK Nilfisk-Advance A/S Sognevej 25 DK-2605 Brøndby Tel.: (+45) 4323 8100 www.nilfisk-advance.com SALES COMPANIES ARGENTINA Nilfisk-Advance srl. Herrera 1855, 6 floor, Of. A-604 ZC 1293 – Ciudad Autónoma de Buenos Aires – Argentina www.nilfisk-alto.com AUSTRALIA Nilfisk-ALTO Unit 1, 13 Bessemer Street Blacktown NSW 2148 Australia www.nilfisk-alto.com.au AUSTRIA Nilfisk-ALTO Geschäftsbereich der Nilfisk-Advance GmbH Metzgerstraße 68 A-5101 Bergheim/Salzburg www.nilfisk-alto.
