ATTIX 40-0M PC TYPE 22 Operating Instructions 107400339 C
ATTIX 40-0M PC TYPE 22 Contents GB DE FR NL 1 Important safety instructions ............................................................................................2 2 Description 2.1 2.2 Operating elements ..............................................................7 Operating panel ....................................................................7 3 Before starting the cleaner 3.1 3.1.1 3.1.2 3.2 3.3 3.4 Assembling the vacuum cleaner...........................................
ATTIX 40-0M PC TYPE 22 GB 1 Important safety instructions DE FR Symbols used to mark instructions NL Prior to using the appliance for the first time, be sure to read this document through and keep it ready to hand. DANGER IT Danger that leads directly to serious or irreversible injuries, or even death. NO WARNING Danger that can lead to serious injuries or even death. SV CAUTION DA Danger that can lead to minor injuries and damage.
ATTIX 40-0M PC TYPE 22 • Zone 22 is defined as environments where flammable dusts are present for short periods only (e.g. less than 10 hours per year). • Type 22 machines are suitable for use as dust extractors. GB DE The air flow in Safety Vacuum systems has to be strictly controlled to achieve a minimum flow rate of Vmin = 20 m/s in the suction hose.
ATTIX 40-0M PC TYPE 22 GB Electrical connection 1. It is recommended that the vacuum cleaner should be connected via a residual current circuit breaker. 2. When picking up flammable dust in zone 22, extension lines, couplings and adapters must not be used. 3. Arrange the electrical parts (sockets, plugs and couplings) and lay down the extension lead so that the protection class is maintained. 4. Connectors and couplings of power supply cords and extension leads must be watertight. Extension lead 1.
ATTIX 40-0M PC TYPE 22 Risks Electrical components GB DANGER DE Electric shock due to faulty mains connecting lead. Touching a faulty mains connecting lead can result in serious or even fatal injuries. 1. Do not damage the mains power lead (e.g. by driving over it, pulling or crushing it). 2. Regularly check whether the power cord is damaged or shows signs of ageing. 3.
ATTIX 40-0M PC TYPE 22 GB WARNING DE For dusts like titanium and magnesium additional requirements apply, consult your national labour authorities or the manufacturer of the vacuum cleaner. FR Spare parts and accessories Spare parts and accessories. For picking up flammable dust in Zone 22: Only use accessories which are certified by the manufacturer of the Type 22 machine. The use of other accessories can cause danger of explosion.
ATTIX 40-0M PC TYPE 22 2 Description GB DE FR NL 2.1 Operating elements 1 2 3 4 5 6 7 8 9 Handle with receptacle for electrical lead Fixing point for suction pipe holder Retaining clamp Castor Dirt tank Inlet fitting Applicance switch Hose diameter setting Operating knob for filter cleaning IT NO SV DA FI ES PT 9 1 EL TR 8 7 SL 2 3 HR SK 6 CS 5 PL HU RO 4 BG 2.
ATTIX 40-0M PC TYPE 22 GB 3 Before starting the cleaner DE 3.1 NL Assembling the vacuum cleaner 3.1.1 Taking accessories out of the packaging *) ø32 A ø36 ø38 A IT ø 27 FR NO SV DA FI 1. Take vacuum cleaner and accessories out of the packaging. 2. The mains plug should not yet be inserted into a socket. 3. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner. 4. Take the accessories *) out of the dirt tank and the packaging. 1.
ATTIX 40-0M PC TYPE 22 GB DE Before picking up dust with occupational exposure limit values: 1. Check that all the filters are present and properly fitted. 2. Do not use the cleaner with damaged or missing antistatic clamp. Risk of explosion due to static discharge in explosive atmospheres. 3. The hose diameter and the setting for the suction hose diameter must be the same. 4. When the motor is running, hold the suction hose shut.
ATTIX 40-0M PC TYPE 22 GB DE FR NL 3.4 Inserting the filter bag IT NO ø 27 ø32 ø36 ø38 A SV A 1. The mains plug should not yet be inserted into a socket. 2. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner. DA FI ES 3. Insert the filter bag into the dirt tank. PT EL TR SL HR 4. Press the filter bag connection firmly on to the inlet fitting. SK CS PL HU RO BG 5. Attach the upper section of the vacuum cleaner. 6. Close the retaining clamps (A ).
ATTIX 40-0M PC TYPE 22 4 Control / Operation GB DE FR NL 4.1 Connections 4.1.1 Connecting the suction hose 1. Connect the suction hose. IT NO SV DA FI 4.1.2 Electrical connection The operating voltage shown on the rating plate must correspond to the voltage of the mains power supply. 1. Ensure that the cleaner is switched off. 2. Insert the power cord into a properly installed and fused socket with earthing contact. ES PT EL TR 4.
ATTIX 40-0M PC TYPE 22 GB DE FR NL 4.3 IT Cleaning the filter element " Push&Clean System " Filter Cleaning System NO SV Only for vacuum cleaning without a filter bag and without a cloth insert filter. DA FI ES PT EL If suction performance drops: 1. Turn switch to position "I" (maximum suction power). 2. Close the nozzles or suction hose opening with the palm of your hand. 3. Press the button to start filter cleaning three times.
ATTIX 40-0M PC TYPE 22 5 Applications and techniques GB DE FR NL 5.1 Techniques 5.1.1 Picking up dry substances If used correctly, additional accessories, suction nozzles and suction hoses can enhance the cleaning action and reduce the cleaning effort. Effective cleaning is achieved if you follow just a few guidelines in combination with your own practical experience in special fields. NO Here are some basic tips.
ATTIX 40-0M PC TYPE 22 GB 6 After finishing work DE FR NL 6.1 IT Switching the vacuum cleaner off and storage NO SV DA FI ES A PT C EL TR B SL HR 1. After picking up hazardous dust, vacuum clean the outside of the cleaner. 2. Switch off the cleaner and pull the mains plug out of the socket. 3. Wind up the power cord onto the handle (A). Begin winding up the cord at the cleaner end and not the plug end to prevent the power cord from tangling up. 4.
ATTIX 40-0M PC TYPE 22 7 Maintenance GB DE FR NL 7.1 Maintenance plan IT After finishing work When required 7.2.1 Emptying dirt tank 7.2.2 Replacing the disposal bag 7.2.3 Replacing the filter bag 7.2.4 Replacing filter element (Push&Clean) 7.2.5 Replacing motor cooling filter NO SV DA FI 7.2 Maintenance work 7.2.
ATTIX 40-0M PC TYPE 22 GB DE FR NL NO DA A A ø36 ø32 ø38 SV During the following work, ensure that dust is not unnecessarily spread around. Wear a P2 breathing mask. ø 27 IT 7.2.2 Replacing the disposal bag 1. Switch off the vacuum cleaner and pull the mains plug out of the socket. 2. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner. Never use the vacuum cleaner without a filter. FI ES Removing the disposal bag: 3. Close the disposal bag with string (B). 4.
ATTIX 40-0M PC TYPE 22 GB DE FR NL 7.2.3 Replacing the filter bag A ø36 ø32 ø 27 A ø38 During the following work, ensure that dust is not unnecessarily spread around. Wear a P2 breathing mask. 1. Switch off the vacuum cleaner and pull the mains plug out of the socket. 2. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner. Never use the vacuum cleaner without a filter. IT NO SV DA FI Removing the filter bag: 3.
ATTIX 40-0M PC TYPE 22 GB DE FR NL NO DA A A ø36 ø32 ø38 SV During the following work, ensure that dust is not unnecessarily spread around. Wear a P2 breathing mask. ø 27 IT 7.2.4 Replacing filter element (Push & Clean System) 1. Switch off the vacuum cleaner and pull the mains plug out of the socket. 2. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner. Never use the vacuum cleaner without a filter. FI ES Removing the filter element: 3.
ATTIX 40-0M PC TYPE 22 GB DE FR NL 7.2.5 Replacing the motor cooling filter 1. Remove filter cartridge. IT During the following work, ensure that dust is not unnecessarily spread around. Wear a P2 breathing mask. NO SV Never use the vacuum cleaner without a filter. DA FI 2. Dispose of the used filter cartridge in accordance with legal regulations. ES PT EL TR SL HR 3. Fit a new filter cartridge.
ATTIX 40-0M PC TYPE 22 GB 8 Troubleshooting DE FR NL Fault IT ‡ Motor does not start NO Cause Remedy > Fuse of the mains socket has blown • Connect mains fuse > Overload protection switch has tripped • Switch off the vacuum cleaner and allow it to cool for approx. 5 minutes.
ATTIX 40-0M PC TYPE 22 9 Further information GB DE FR NL 9.1 Recycling the cleaner Make the old cleaner unusable immediately. 1. Unplug the cleaner. 2. Cut the power cord. 3. Do not discard of electrical appliances with household waste. IT As specified in European Directive 2002/96/EC on old electrical and electronic appliances, used electrical goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest dealer for further information. 9.2 9.
ATTIX 40-0M PC TYPE 22 GB DE FR NL 9.
Nilfisk-ALTO www.nilfisk-alto.