Operation Manual

16
MULTICLEANER 7-53
Original Instructions
7.2.5 Adjustment of washing
arm
The optimum position of the washing arm is that the nozzle head is
centred over the pen with the horizontal arm as close to vertical po-
sition as possible. It may be necessary to adjust the arm differently
in order to provide for the inventory.
Note! It is the responsibility of the user that the washing arm is ad-
justed so that it does not collide with feed / water pipes or the like
during operation.
7.2.6 Engagement of
propulsion wheels
The gear motors for the driving wheels are engaged by means of
two handles placed on each side of the chassis. The handles can
be placed in two positions. In the upper position the gear motors are
not engaged, which position is used during transport. In the lower
position the gear motors are engaged, which position is used during
operation.
7.3 Menu The diagram below figures the menu of the MULTICLEANER.
Start display
Auto-routines
Manual
Washing
routine
Tower angle
Arm angle
Disinfection
Right wheel Left wheel
Pen depth
Fence Back wall Washing side
No. of washes
Pause
Aisle washing
Operational
hours
Version
Soap
Settings
Language
Tower Arm
Nozzle
Pump
Distance
to wall
Obstacle
Ultrasonic
sensor
Aisle washing
Start
Soap in wash
Fence Back wall
Washing side
No. of washes
Pause
Start
Tower angle
Arm angle
Pen depth
Soap pump
By-pass valve
Soap %
Disinfection %
Only soap/dis-
infection option
NB: