Operation Manual

ManualsBrandsNilfisk-ALTO ManualsPressure WasherMULTICLEANER 7-53

MULTICLEANER 7-53

Original Instructions

By means of the arrows the user can get around in the menu

system. When the MULTICLEANER has been connected to the

power supply, it will be ready for operation after 30 sec. Then the

display will show a start-up screen, on which the user will be asked

to press arrow the right to initiate the MULTICLEANER.

Now the user has entered the main menu and it will be possible to

select between 3 menu options using arrows up and down.

• Auto-routines

This menu option is used for programming the washing

sequence.

• Manual control

This menu option can be used for controlling the

MULTICLEANER manually.

• Settings

This menu option can be used for making changes in the

configuration of the MULTICLEANER.

Submenu:

They user can enter and exit the submenus by pressing the arrows

to the right and the left. Using the arrows up and down, the values in

the submenus can be changed.

Washing routine:

Tower angle: Select the hole number in which the tower

is placed.

Arm angle: Select the hole number in which the arm is

placed.

Pen depth: Select pen depth measured from the fence

to the back wall of the pen.

Fence: Select washing height of fence.

Back wall: Select washing height of back wall.

Washing side: Select washing of either right, left or both

sides.

No. of washes: Select the number of washes you want to

have done.

Pause: Select pause between each washing.

Aisle washing: Select if you want washing of the aisle.

Start: By pressing arrow to the right, the settings

of the washing sequence are saved and the

MULTICLEANER will start up the washing

sequence.

Soap/disinfection option:

If this option has been mounted on the MULTICLEANER, it must be

activated in the menu "Settings" under "Soap". When this option is

activated, the soap and disinfection solution can be set in the menu

"Settings" and a soap application menu will appear in the washing

routine.

Obstacle detection option:

If this option has been mounted on the MULTICLEANER, it can be

activated and deactivated in the menu "Settings".