Operation Manual

7
MULTICLEANER 7-53
Original Instructions
3.1.1 Warning sign on the
door
The accompanying warning sign must be placed on the door lead-
ing to the pig house section where the automatic washing is taking
place. The sign must be visible to any person who may have access
to the pig house section.
If the sign is lost or if there is more than one access, a new sign can
be ordered from Nilfisk-ALTO. Order no. 107307061.
3.1.2 Access to robot during
operation
The robot must be placed so that the operator has always got ac-
cess to the display and the control knobs without having to pass
the robot during the automatic washing, meaning that the end of
the robot where the display is placed must turn to the access side
during operation.
3.1.3 Training of staff Employees who are to operate the robot will beyond the written in-
structions always receive a verbal instruction from a staff member of
Nilfisk-ALTO in connection with the delivery and starting up of a new
robot.
4 Service
4.1 Safety Always disconnect the electrical plug from the socket prior to
service, maintenance, repair or other works on the washing robot.
Repairs to the control pen of stainless steel must be carried out by
an electrician as it contains automatic fuses, contactor, emergency
stop module and power supplies.
The control pen of plastic contains the control system and must only
be serviced by a Nilfisk-ALTO service technician.
When working underneath the robot you should be very careful as it
weighs 285 kg.