Operation Manual

20
SOLAR BOOSTER D/EH
Original Instructions
5 Fields of Application and
Working Methods
5.2 Working pressure
5.1 Fields of application
The most important fi elds of application for this product are:
Agriculture Cleaning of machinery, agricultural implements, stalls,
equipment and buildings.
Transport Cleaning of trucks, buses, cars etc.
Building & Cleaning of vehicles, equipment, buildings etc.
Construction
Light industry Degreasing and cleaning of machines, workpieces, and
vehicles.
Service Cleaning of vehicles, public baths, institutions etc.
The high pressure system may be used with high or low pressure
at your own option:
Low pressure Is fi rst and foremost used for the application of detergents
and for fl ushing.
High pressure Is used during the actual cleaning.
Intermediate As an example it may be used for the cleaning of surfaces
pressure which cannot stand a too powerful jet, i.e. soft surfaces.
5.3 Temperature
Hot water signifi cantly increas-
es the effi ciency of the cleaning
process – especially grease,
oils and fats can be broken
down more easily at higher
temperatures.
Temperatures up to 60°C
should clean off proteins, such
as blood substances.
Oil and traffi c fi lm should be
exposed to app. 70°C, whereas
grease and fat is easiest to
remove with temperatures of 80
to 85°C.
Several detergents become
more effi cient when acting with
hot water – please refer to
manufacturers recommenda-
tions.
5.4 Mechanical impact
In order to break down tough
layers of dirt, additional me-
chanical impact may be re-
quired. Special lances with
special nozzles (pulsating jet /
concentrated “0” jet) are avail-
able for such purposes as are
rotating brushes plus soft &
sand blasting equipment.
Please ask your Nilfi sk-ALTO
representative.