Brochure

Nilfisk EcoPower™ clears the way to
quicker cleaning
MH series
We have worked extensively with the WfK Institute in
Germany (investigation WL 6203/12 of WfK Testing
Institute) in studying the cleaning effect of different
parameters on cleaning efficiency for different types of
applications and dirt types such as oil, grease, traffic film
and rim dirt on surfaces like metal and vehicle bodywork.
The results allow us to identify best practice cleaning
methods in order to reduce cleaning time. Our studies
show clearly that the use of hot water implies a major
gain in cleaning efficiency for some applications.
Cleaning time can be reduced by 4 for cleaning of oil and
grease from metallic surfaces when using 60°C water
instead of cold water. This reduces labour, water and
electrical costs by 4 reducing the total cost of use of a
pressure washer significantly.
The Nilfisk EcoPower™ boiler offers the users the benefit
of the highest efficiency levels in the market – between
92 and 93%** efficient and at the same time saving fuel
costs. This efficiency level is recognized and approved by
the EUnited.
Make your move and take on some of the most demanding cleaning tasks with the MH series.
Higher efficiency and quicker cleaning are the by words to the improved fuel saving EcoPower™
boiler system.
4
Effect of Temperature on cleaning performance *
Performance % Grease
and Oil on Truck Bodywork
Performance % Traffic Film
on car bodywork
Performance % Oil and
Grease on metal work
Performance % Rim Dirt
on metal sheets
22%
88%
92%
3%
51%
74%
53%
79%
91%
41%
77%
92%
60°C 90°CCold
*investigation WL 6203/12 of WfK Testing Institute
** Nilfisk boilers have been certified as high efficiency boilers by EUnited - a guarantee of their high performance and low run costs.
EcoMode
The MH series has the possibility of cleaning in an EcoMode. This setting
adjusts the boiler to its most efficient setting for a wide range of applications
such as car cleaning, cleaning of protein rich material such as blood or animal
waste.