Operation Manual

7
Safety instructions
• Do not use the machine without
dust bag and filters properly fitted.
•
This machine is not intended for
the suction of hazardous materi-
als or gas, doing so may expose
people to serious health risks.
•
The machine must not be used for
the suction of water or other liquids.
• Do not pick up sharp objects such
as needles or pieces of glass.
•
Do not pick up anything that is
burning or smoking such as ciga-
rettes, matches or hot ashes.
•
Use and store this machine indoors
and in a dry environment, 0 °C to
60 °C.
•
Do not use the machine outdoors.
• Do not handle the machine with
wet hands.
•
Turn off the machine before un-
plugging.
•
To unplug, grasp the plug, not by
pulling on the cord. Do not carry or
pull the machine by the cord.
•
The machine must not be used if
the cord shows any sign of dam-
age. Regularly inspect the cord for
damage, in particular if it has been
crushed, shut in a door or run over
.
• Do not use the machine if it ap-
pears faulty. Have the machine
inspected by an authorized service
center if the machine has been
dropped, damaged, left outdoors or
has been exposed to water
.
• No changes or modifications to
the mechanical or electrical safety
devices should be made.
•
All repairs must be carried out by
an authorized service center.
• Use only original dust bags, original
filters and original accessories from
your local dealer
. Use of unauthor-
ized dust bags and filters will void
the warranty
.
• Turn off the machine and unplug
before starting dust bag or filter
change, grasp the plug, not by pull-
ing on the cord.
•
Do not use the machine as a toy.
Do not leave children with the
machine without supervision.
•
This appliance is not intended for
use by young persons or infirm
persons without supervision unless
they have been adequately super-
vised by a responsible person to
ensure that they can use the appli-
ance safely
. Young children should
be supervised to ensure that they
do not play with the appliance.
•
If the supply cord is damaged, it
must be replaced by the manufac-
turer or its service agent or similary
qualified person in order to avoid a
hazard.
E
n
g
l
i
s
h