Operation Manual

USER MANUAL
6 32401131(1)2005-03 A
5 Testing, delivery, installation
5.1 Testing
The vacuum cleaner is tested in the factory, to ensure
proper operation.
All necessary tests concerning the suction values are
carried out at this time. This enables the vacuum
cleaner to be optimised according to the type of use it
was designed for.
5.2 Delivery and handling
The vacuum cleaner is delivered inside a pallet,
packaged in a cardboard box. Upon delivery, check the
vacuum cleaner thoroughly to find out possible
concealed damages. If damage is discovered, please
contact the parcel service immediately.
The vacuum cleaner can be stored at temperature
between 0° and 30°C, with relative humidity up to 65%.
Before storage, make sure that the chosen surface is
able to bear the weight of the vacuum cleaner.
Before storage, make sure that the vacuum cleaner is
clean, as described in the User Manual. The vacuum
cleaner can operate at a temperature between -5° and
+30°C, with relative humidity up to 65%.
The vacuum cleaner packing materials must be
disposed of according to the laws in force.
The worn-out vacuum cleaner should be disposed of
according to the laws in force.
The vacuum cleaner cleaning operations should be
performed exclusively with non-toxic and
non-flammable commercially available and approved
solvents.
5.3 Warranty certificate
The warranty certificate is included in the vacuum
cleaner packing.
5.4 Installation
5.5 Connection to the electrical mains
WARNING!
The owner is responsible for ensuring that
installation complies with the local
statutory regulations.
The vacuum cleaner must be installed by
a qualified technician who has read and
understood the instructions herein.
The surface on which the vacuum cleaner
must operate should be flat, smooth and
solid.
If the vacuum cleaner must be used from
a fixed post. Always leave enough space
to ensure it can move freely and to
facilitate maintenance operations.
WARNING!
Ensure that the mains voltage and the
frequency values match those indicated
on the technical data plate of the vacuum
cleaner, as described in the paragraph 3.1.
All installation and maintenance
operations on the electrical parts of the
vacuum cleaner must be carried out by
qualified technicians only.
Connect the vacuum cleaner to a proper
grounding system.
Make sure that the electrical mains
voltage matches the data on the vacuum
cleaner plate.