Nilfisk P 130.2/150.2/160.
Printed in China Copyright © 2013 Nilfisk-Advance A/S
Nilfisk P 130.2 / P 150.2 / P 160.2 Index 1 2 3 4 5 6 7 8 9 10 11 EN Safety precautions and warnings .............................................3 Description ...............................................................................5 Before you start using your pressure washer ...........................6 Operating your pressure washer ..............................................7 Fields of application and working methods ............................11 After using your pressure washer ..........
Nilfisk P 130.2 / P 150.2 / P 160.2 EN footwear on yourself or other persons. Hold the spray lance firmly with both hands. The spray lance is affected by a thrust of up to 16.4 N during operation. The operator and anyone in the immediate vicinity of the site of cleaning should take action to protect themselves from being struck by debris dislodged during operation. Wear goggles during operation.
Nilfisk P 130.2 / P 150.2 / P 160.2 Thermal sensor: A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when the thermal sensor has cooled. Pressure safety device An integrated hydraulic safety valve protects the system from excessive pressure. EN 2 Description 2.1 Application This high-pressure washer has been developed for domestic use for cleaning: Only use the high-pressure washer for purposes described in this manual.
Nilfisk P 130.2 / P 150.2 / P 160.2 EN 3 Before you start using your pressure washer 3.1 Mounting of holders for spray lance Mount the holders for spray lance on the machine. 3.2 Mounting of hose hook (only models without hose reel) Mount the hose hook (14) on the handle (2 screws). Note: the hose hook can be mounted on the front as well as on the back. Front position is to be used if the product is used together with a special wall hook for wall storage. 3.
Nilfisk P 130.2 / P 150.2 / P 160.2 3.4 Mounting of quick coupling 1. Screw the quick coupling tight on to the water inlet (2). Note: The inlet filter must always be fitted in the water inlet pipe to filter out sand, limestone and other impurities as these will damage the pump valves. Caution: Failure to fit the filter will invalidate the guarantee. 3.5 Mounting of high pressure hose Attach the high pressure hose (4) to the spray handle (7). Detach the high pressure hose by pressing the pawl.
Nilfisk P 130.2 / P 150.2 / P 160.2 EN 4.2 Mounting of spray lance and nozzles 1. Push the spray lance (6) into the spray handle (7) and twist it until the bayonet coupling locks into position. 2. Attach the nozzle. 4.3 Water connection An ordinary 1/2" garden hose of min. 10 m and max. 25 m will be suitable. NOTE: Connection to the public mains according to regulations. IMPORTANT! Only use water without any impurities. If there is a risk of silt, sand or sediment in the inlet water (i.e.
Nilfisk P 130.2 / P 150.2 / P 160.2 4.5 Start and stop of the machine (when connected to a water supply) The spray lance is affected by a thrust during operation - therefore always hold it firmly with both hands. IMPORTANT: Point the nozzle at the ground. 1. Check that the machine is in upright position. NOTE: Do not place the machine in tall grass! 2. Release the trigger lock. 3. Activate the trigger of the spray handle and let the water run until all air has escaped from the water hose. 4.
Nilfisk P 130.2 / P 150.2 / P 160.2 EN 4.8 Operation with detergents Application of detergents is NOT possible if an extension hose is applied. 1. Fill the container with a detergent. 2. Mount the TORNADO® PR nozzle and adjust it to low pressure (see section 4.7). 3. Adjust the dosing regulator (12) to the required volume of detergent (0-5%). 4. Apply the detergent from below and upwards. 5. Let the detergent act for the time stated on the packing of the detergent and flush with pure water.
Nilfisk P 130.2 / P 150.2 / P 160.2 4.10 Stationary use EN If mounting a special wall hook (not standard), the pressure washer can be used as a stationary solution meaning that it can be operated while hanging on the wall. a b c Only mount the wall hook on a sturdy wall. Adjust the length of the screws and size of rawlplugs to the type of wall. On the wall hook garden/rim brush (a), brush (b) and nozzles (c) can be stored. Important: The bearing capacity of the wall hook is max. 30 kg.
Nilfisk P 130.2 / P 150.2 / P 160.2 EN 5.2 Typical fields of application Below you will find a description of a lot of cleaning tasks which can be solved by a pressure washer from Nilfisk in association with accessories and detergents. Task Car Accessories ® Tornado PR nozzle, auto brush, underchassis spray lance, Car Combi Cleaner Cleaning method 1. Apply Car Combi Cleaner. Always start from the bottom and work upwards. Let Car Combi Cleaner act for at least 5 min. 2.
Nilfisk P 130.2 / P 150.2 / P 160.2 6 After using your pressure washer 6.1 Storing the washer 6.2 Winding up of electric cable and high pressure hose The machine should be stored in a frost-free room! Pump, hose and accessories should always be emptied of water prior to storing as follows: 1. Stop the machine (turn the start/stop switch (1) to position “O” and detach water hose and accessory. 2. Restart the machine and activate the trigger.
Nilfisk P 130.2 / P 150.2 / P 160.2 EN 7 Maintenance WARNING! Always disconnect the electrical plug from the socket prior to maintenance or cleaning. To ensure a long and problem free working life, please take the following advice: Clean the connectors of dust and sand. Clean the nozzles. Any repair should always be made in an authorized workshop with original spare parts. Wash off water hose, high pressure hose, spray lance and accessories before mounting. 7.
Nilfisk P 130.2 / P 150.2 / P 160.2 8 Trouble-shooting EN Please ensure that you check the following before contacting the Nilfisk service organization: Symptom Cause Recommended action Machine refuses to start Machine not plugged in Defective socket Fuse has blown Defective extension cable Plug in machine. Try another socket. Replace fuse. Switch off other machines. Try without the extension cable. Fluctuating pressure Check that hoses and connections are airtight.
Nilfisk P 130.2 / P 150.2 / P 160.2 EN 9 Further information 9.1 Recycling the washer Make the old cleaner unusable immediately. 1. Unplug the cleaner and cut the electric cable. Do not discard electrical appliances with household waste. tive 2002/96/EC on old electrical and electronic appliances, used electrical goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest dealer for further information. As specified in European Direc- 9.
Nilfisk P 130.2 / P 150.2 / P 160.2 9.3 Accessories EN Only use original accessories. Brush For cars and other surfaces. Extension hose 7 m extension hose increasing the working range. Underchassis spray lance Special spray lance for washing your car underneath. Drain & Tube cleaner 15 m long tube cleaner for the cleaning of tubes and drains. Water-sandblasting equipment For removal of paint and rust. Sand available from do-it-yourself shops.
Nilfisk P 130.2 / P 150.2 / P 160.2 EN Detergents Stone & Wood Cleaner For flagstones, brick- and woodwork. Suitable for moss and algae. Plastic Cleaner For plastic and synthetic materials such as garden furniture. Metal Cleaner For cleaning of metal such as garden tools. Car Combi Cleaner For cars etc. With rinsing wax. Alu Cleaner For surfaces of aluminium. Applied with an atomizer. Oil & Grease Cleaner For cleaning of grease and oil on motors for instance. Applied with an atomizer.
Nilfisk P 130.2 / P 150.2 / P 160.2 10 Technical Data EN Type P 130.2 P 150.2 P 160.2 Electrical Specification Rated voltage V 230 230 230 Rated frequency Hz 50 50 50 Rated power consumption kW 2,300 2,900 3,300 Current A 10.0 12.6 14.5 Protection class Class I/ Class II Class I Class I Class I Protection degree IP xx IPX5 IPX5 IPX5 Hydraulic specification Rated pressure MPa/bar 12/120 14/140 15/150 Max.
Nilfisk P 130.2 / P 150.2 / P 160.2 EN 11 EU Declaration of Conformity EU Declaration of Conformity Product: High Pressure Washer Type: Nilfisk P 130.2, P 150.2, P 160.
7 6 7a P 160.
http://www.nilfisk.com HEAD QUARTER DENMARK Nilfisk-Advance Group Sognevej 25 DK-2605 Brøndby Tel.: (+45) 4323 8100 E-mail: mail.com@nilfisk-advance.com SALES COMPANIES HUNGARY Nilfisk-Advance Kereskedelmi Kft. II. Rákóczi Ferenc út 10 2310 Szigetszentmiklos-Lakihegy Website: www.nilfisk.hu INDIA Nilfisk-Advance India Limited Pramukh Plaza, ‘B’ Wing, 4th floor, Unit No. 403 Cardinal Gracious Road, Chakala Andheri (East) Mumbai 400 099 Website: www.nilfisk.com AUSTRALIA Nilfisk-Advance 48 Egerton St. P.O.
