ZK601 Hardware Specification ZK601 Hardware Specifications GSM/GPRS/LTE CAT.M1&NB1 GPS Intelligent Terminal Version: 1.
ZK601 Hardware Specification Document Title ZK601 Hardware Specification Version 1.00 Author Xin Yang Date 2019-08-05 Note 1: T-Panel 201 is Model Name for sales. ZK601 is a model name for T-Panel 201 in company inside. Note 2: This manual is a Worldwide version. The operation frequency band of the product will be different for different countries.Details please consult Queclink.
ZK601 Hardware Specification Contents 0. Revision History ............................................................................................................... 1 1. Introduction .................................................................................................................... 2 2. Special Note .................................................................................................................... 2 3. Basic Specification ..............................................
ZK601 Hardware Specification 0. Revision History Version Date Author Description of Change 1.
ZK601 Hardware Specification 1. Introduction ZK601 software function development mainly involves electric control unit (ECU), @Track Air Protocol, instrument display, headlight control, acceleration, brake, key on panel, voice broadcast and Bluetooth. ZK601 device is designed to connect to the scooter to enable remotely lock/unlock, to track the position information and to report the status of the scooter. By using the accelerator or brake, the user can increase or decrease the speed of the scooter.
ZK601 Hardware Specification 4. Hardware Description 4.1. Hardware Block Diagram Following is the Hardware Block Diagram of ZK601: 4.2. Internet RF Specification The ZK601 supports GSM/GPRS/EDGE/ LTE CAT-M1/ CAT-NB1 for selection. 4.2.1.
ZK601 Hardware Specification Class 1 (30dBm±2dB) for DCS1800 and PCS1900 Class E2 (27dBm±3dB) for GSM850 and EGSM900 8-PSK Class E2 (26dBm±3dB) for DCS1800 and PCS1900 8-PSK Receive Sensitivity GSM850: -109.5dBm (typ.) EGSM900: -108.5dBm (typ.) DCS1800: -110dBm (typ.) PCSM1900: -108dBm (typ.) Transmit Mode TCP Antenna Internal only 4.2.2. ZK601 (LTE CAT.M1&CAT.NB1) RF specification Item ZK601 (LTE CAT.M1&CAT.NB1) RF Specification Applicable Region Worldwide Technology LTE CAT.M1&CAT.
ZK601 Hardware Specification 4.4. BLE Specification Full Bluetooth 4.1 or higher integration from ST. The minimum communication distance is 15 meters regardless of device orientation. Item BLE Specification Frequency 2.4GHz RF transceiver compatible with Bluetooth low energy (BLE) Receive Sensitivity -88dBm RF Output Power Up to 10dBm Antenna Internal only 4.5. NFC Specification Item NFC Specification Frequency Contactless communication at 13.
ZK601 Hardware Specification 5. Hardware Interface Description 5.1. ECU Interface Power Input: • Wide range input: 36V±5V DC • Short-circuit protection • Soft-start timer • Smart Power Management UART Interface: • Baud rate auto adaption, support 9600bps, 19200bps,115200bps • 3.3V and 5V TTL level compatible Power Control Wire • • To activate ECU OD drain output, compatible with external pull-up voltage 3V-36V 5.2.
ZK601 Hardware Specification 5.3. Dual Brake Interface Main Features: • • The power 5V for the brake HALL sensor is controllable HALL output voltage 1-4V, sensitivity: 1.2mV/G 5.4. Accelerator Interface Main Feature: • • The power 5V for the brake HALL sensor is controllable HALL output voltage 1-4V, sensitivity: 1.2mV/G 5.5. Front Light Interface Main Feature: • • • Drives LED strings up to 12V Switch current limit: 0.
ZK601 Hardware Specification 5.6. LED Display • • • Drive LED SEG up to 50mA@5V, Drive up LED GRID to 200 mA@5V Display mode: 8seg*6dig Refresh Rate: 450KHz 5.7. Audio Codec Main Feature: • • • • • High performance and low power multibit delta-sigma audio ADC and DAC I 2S/PCM master or slave serial data port 24-bit, 8 to 96 kHz sampling frequency Signal to noise ratio: 95 dB, THD+N: -85 dB 1.25W@8Ω/5V or 1.8W@4Ω/4.2V mono class D speaker driver 5.8.
ZK601 Hardware Specification 6. User Guide 6.1. Guiding 1. 2. 3. 4. Connect ZK601 to Scooter with 5 Pin Serial port Cable. To charge Scooter to activate ZK601. ZK601 uploads the GPS data or the status of Scooter to Server. ZK601 receives command from Server to control Scooter. This device complies with Part 15 of the FCC Rules.
ZK601 Hardware Specification This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
