Specifications
ZK601 Hardware Specification
2
1. Introduction
ZK601 software function development mainly involves electric control unit (ECU), @Track
Air Protocol, instrument display, headlight control, acceleration, brake, key on panel, voice
broadcast and Bluetooth. ZK601 device is designed to connect to the scooter to enable
remotely lock/unlock, to track the position information and to report the status of the
scooter. By using the accelerator or brake, the user can increase or decrease the speed of
the scooter. By using the key on the panel, the user can turn on the headlight, switchover
the speed-up mode or end using the scooter. All the information will be reported to the
backend sever to facilitate the basic functions of the scooter.
2. Special Note
LoT must be powered on again by pressing power button or charging if it is powered down
unexpectedly.
3. Basic Specification
Item
Specification
Dimension
Length*Width*Height: 149mm*47mm*51mm
Input Power
DC: 36V±5V( withstand 60V for less than 2 seconds)
Backup Battery
Li-Polymer, 750mAh
IP Grade
IP67
Operating Temperature
-20℃ ~ +60℃
Power Consumption
Active: 36V@ 21mA
Sleep: 36V@ 5mA
Shut-down: 36V@ ≤100uA