User's Manual

ZK611MG (T-Panel211) User Manual
4 Hardware
3.1 Interface Definition
The power cable input, red wire for positive, black wire for negative.
Pin Name
Description
GND
Power GND (Black)
UART_RX
The RX communication pin
UART_TX
The TX communication pin
Power_EN
To control the power supply
DC IN
Power+ Input (Red)
5 Getting Started
4.1 Installing SIM Card
1, Turn off ZK601MG (T-Panel201).
2, Open ZK601MG (T-Panel201) and insert SMI card as follows.
4.2 Communicating with Backend Server
After installing SIM card and power on, ZK601MG (T-Panel201) can communicate with the
backend server through network, and transfer reports of emergency, Geo‐fencing, device status
and scheduled GPS position etc. It is easy for service provider to set up their tracking platform
based on the functional wireless tracking protocol.