User's Manual

AST-WR129 Bamboo Wireless
charger docking station
User Manual
Input: DC5V 2A（MAX）
Output: DC5V 1A
Wireless power: 5W
Specification:
1 x Bamboo Wireless charger docking station
1 x User Manual
1 x Charging Cable
What’s included:
When the red light is on, the wireless charger is stand by and the blue indicator lights
on, means the wireless charger is working.
Indicator light:
When wireless charging; if the wireless charging indicator light flashing blue alternately,
the device is either NOT a wireless charging device or there is an object between the
device and charging surface interfering with the charging process.
Foreign Object Detection:
• Plug the stand, using the included micro-USB cable, into the USB port of your adapter.
The wireless charging indicator light flashing red and blue for three times, then turns to
be red.
• Make sure your phone is compatible for wireless charging.
• Put your wireless charging enabled device on the wireless charging surface, the
wireless charging indicator light turns to be blue.
Using the wireless charging:
Wireless charging area
For pen
Indicator light
Input port
When the continuous working temperature is higher than 60 degrees Celsius, the
electric current decreases and if the temperature exceeds 80 degrees Celsius, the
charger will be turned off. When the temperature is under 60 degrees Celsius, the
charger will resume to work normally.
NTC protection:
Please pay attention to the following considerations, otherwise it may cause abnormal
charging or disinfection.
1.Please put the mobile phone in the center of the charging area.
2.The sensing distance of wireless charging is 2-6mm. When charging the mobile
phone wirelessly, please do not assemble the protective case with the thickness more
than 3mm.
3.During wireless charging, there shall be no metal or magnetic objects within the
distance range of 6cm in diameter from the center point on the back of the mobile
phone.
4.The lower temperature, the faster charging speed. The charging speed is faster in
winter than in summer.
5.Pay attention to waterproof of the wireless charger.
6.Do not use the device in excess of its output rating. Overload outputs above rating
may result in a risk of fire or injury.
7.Do not expose the device to moisture.
8.To reduce the risk of injury, close supervision is necessary when the product is used
near children.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
The distance between user and products should be no less than 20cm.
Warning: