User's Manual

requiring input of PUK code to unblock. Please contact your operator for further
details.
PIN2 Code
The PIN2 code is required when activating certain special features (such as call
costs and fixed dialing). It is normally supplied with the SIM card package. Be careful
while entering PIN code. 3 wrong tries in entering PIN code will block the SIM from
use, requiring input of PUK code to unblock. Please contact your operator for further
details.
PUK Code
The PUK (Personal Unblocking Key) code is required to unblock a blocked PIN
code. It is normally supplied with the SIM package; otherwise contact your service
provider for the code. Keep your PUK code in a safe place, do not throw it away.
Contact your service provider if it is lost.
If your SIM is blocked，your phone will ask you to enter PUK code to unblock. You
have 10 tries to enter the right PUK code, after which your SIM might be permanently
blocked.
Phone Password
The Phone Code is a 4 to 8 digit security code that protects unauthorized use of
your phone. The factory default code is “0000”. Once activated, the phone will request
you to enter the Phone code every time the SIM card is changed. For every wrong
code entry, the time interval to the next allowed input will be lengthened. For your
protection, change the default phone code as soon as possible. Do not forget your
phone password.
Using Your Phone
Powering ON/OFF
Press and hold to switch your phone ON or OFF. Startup and goodbye
animation will be played during powering ON and OFF.
If there is no SIM card, the SIM card is defective, or the SIM card contact is loose,
you will be prompted with a warning after powering ON. Shut down and check your SIM
and its installation.
If your phone lock is activated and you changed your SIM, you will be asked to
enter your phone code. Input the phone password and press OK.
If the PIN is activated, you will be asked to enter the PIN. Input your PIN code and
press
.
If your SIM is being blocked, you will be prompted to enter the PUK. Input the PUK
code and hit
.
If you are powering ON during charging, a “Battery charging” prompt will appear.
Press
, , or to continue.