Specifications

MADE IN CHINA FCC ID : 2ABHA0049
This device complies with Part 18 of the FCC Rules
The interference potential of the device or system.
Maintenance of the system.
Simple measures that can be taken by the user to correct interference.
•
•
•
•
DEVICE LAYOUT:
1. Wireless charger transmitter
2. Pause/Play button (short press)
3. Previous track
4. Volume -
5. Micro USB
Congratulations on your BT Home speaker with wireless charger!
This BT speaker allows you to enjoy your music without wires and charge your
phone at the same time.
Please read this manual before use.
NOTE: Wireless charging option is only possible if the micro USB cable is
connected.
CHARGING THE SPEAKER:
A full charge is approximately 3 hours and plays continuously 6-7 hours.
Connect the speaker to the USB charging cable to charge.
When the LED indicator is RED, the speaker is charging.
6. Next track
7. Volume +
8. Speaker
9. Microphone
10. LED indicator for speaker
SPECIFICATIONS:
Input: 5V/2A
Item No.: 32269
Model: SL218
Battery capacity: 2000 mAh
Output: 5W
Wireless charger output: 5V/0.8A
Frequency response : 90Hz-20KHz
S/N Ratio: ≥85db
HOW TO USE: FCC Statement:
If you want to pair your mobile device with the speaker, please make sure the
to pair the device. After doing so the speaker will be visible in the BT devices
overview of your device. Please select “Home wireless speaker’’ to pair your
mobile device with the speaker.
FUNCTIONS:
Accept call – Press pause/play button.
Ending call – Press pause/play button.
Changing Volume: Press the + or – button shortly.
Changing track: Press |>> or |<< button shortly.
USING THE WIRELESS CHARGER:
• Make sure your phone is compatible for wireless charging.
• First plug the wireless charger using the included micro USB cable into the
USB port of your wall adapter. Please note charging speeds depends on the
input power into the wireless charger.
• Place your mobile phone on the charging pad. You can check the charging
status on the screen of your phone.