Installation Instructions

Wireless Remote Control

LTR04

This Product is a Wireless Remote Control, which has 3 groups ON & OFF buttons.

Each group control one type of outlet.

OPERATION:

Remove the plastic battery tab from the battery compartment in the back of the remote control to activate

CR2032, 3V pre-installed battery.

1. Press left "ON" button (I, II, III) on the Remote to power ON (I, II, III) outlets.

2. Press right "OFF" button (I, II, III) on the Remote to power OFF (I, II, III) outlets.

BATTERY INFORMATION AND REPLACEMENT:

One CR2032 3-Volt battery included in transmitter.

1. To replace, slide off the battery cover from the back of Remiote Control.

Make note of the location of the positive side of the battery.

2. Remove the used battery and insert a new CR2032 3-Volt battery.

Confirm that the polarity is correct. When facing the battery compartment from

the back of the remote control, the positive side faces up.

3. Slide the cover back.

4. Dispose of old battery properly.

PAGE 1
Wireless Remote Control LTR04 This Product is a Wireless Remote Control, which has 3 groups ON & OFF buttons. Each group control one type of outlet. OPERATION: Remove the plastic battery tab from the battery compartment in the back of the remote control to activate CR2032, 3V pre-installed battery. 1. Press left "ON" button (I, II, III) on the Remote to power ON (I, II, III) outlets. 2. Press right "OFF" button (I, II, III) on the Remote to power OFF (I, II, III) outlets.
PAGE 2
WARNING: The remote control is not a toy. Keep batteries and remote control away from children and pets. Follow the battery manufacture safety and usage instructions. Remove battery if product is to be left unused for a long time. Clean the battery contacts and also those of the device prior to battery installation. Do not use as permanent source of power. Do not exceed electrical ratings.