Installation Instructions
Wireless Remote Control
LTR05
This Product is a Wireless Remote Control, which has two buttons.
OPERATION:
1. Press"ON"button on the Remote to power ON outlets
2. Press "OFF" button on the Remote to power OFF outlets.
BATTERY INFORMATION AND REPLACEMENT:
One CR2032 3-Volt battery included in transmitter.
1. To replace, slide off the battery cover from the back of Remiote Control.
Make note of the location of the positive side of the battery.
2. Remove the used battery and insert a new CR2032 3-Volt battery.
Confirm that the polarity is correct. When facing the battery compartment from
the back of the remote control, the positive side faces up.
3. Slide the cover back.
4. Dispose of old battery properly.
WARNING:
The remote control is not a toy. Keep batteries and remote control away from
children and pets. Follow the battery manufacture safety and usage instructions. Remove battery if
product is to be left unused for a long time.
Clean the battery contacts and also those of the device prior to battery installation. Do not use as
permanent source of power.
Do not exceed electrical ratings.
ON
OFF