User's Manual

User Manual

1.Product parameter

USB Output

DC5V/3.4A（total）

ach USB Output is 2.1A

Wireless charging Compatible

protocol Output Power

Qi-EPP 10W Max

Input voltage

AC125V/60Hz

Protect function

Over temperature protection, FOD foreign object detection

2、Description of wireless charging function:

1.Put the mobile phone with wireless charging function (such as iPhone8 /X/11,

Samsung Note8/S9+, Huawei mate20Pro, etc.) to the center of wireless charging，

and the charging will start automatically. When the wireless charger is in normal

working condition, the LED green light blink slow.

The indicator status is described in the following table：

status Power-on Standby Charging After full

Metal foreign

body detection

Indicator

status

bright

Always

off

Breathing

state

Everbright Flash 1s / time

PAGE 1
User Manual 1.Product parameter DC5V/3.4A（total） USB Output Wireless charging Compatible protocol Output Power Each USB Output is 2.1A Qi-EPP 10W Max Input voltage AC125V/60Hz Protect function Over temperature protection, FOD foreign object detection 2、Description of wireless charging function: 1.Put the mobile phone with wireless charging function (such as iPhone8 /X/11, Samsung Note8/S9+, Huawei mate20Pro, etc.) to the center of wireless charging， and the charging will start automatically.
PAGE 2
. When charging, you need to keep the center position of the phone aligned with the center position of the wireless charger to perform wireless charging. If it is not working properly, please adjust the position of the phone until the phone shows normal charging or the LED green light blink slow. 3.Notes          Do not mix metal foreign objects between the phone and the wireless charger while charging.