User's Manual

NO.2
Add device-Normal mode
1.Enter the App, tap“+”in the upper right of the
page to enter network connection page，as
shown in the picture
2.There are two network connection
methods(Normal mode and AP mode). Normal
mode is default. Users could tap the upper right
corner to switch the connection method to AP
mode.
3.For normal mode, please make sure the light
rapidly flashes (2 times per second), tap to go on
to the next step
4. If light is not rapidly flashing, tap “how to set
light as rapid flashes” to view operation
processes.
NO.2