User's Manual

(Pictures for reference only)
1.1. Receiver Module
(1) Antenna
(2) CH1 / CH2 RF LED Indicator
(3) CH1 / CH2 Volume Control
UHF / VHF
(1) (2) (3)
PARTS DESCRIPTION AND OPERATION GUIDE
1.2. Handheld Microphone Transmitter
UHF / VHF
(1) Mesh & Capsule
(2) Power LED Indicator
(3) Low Battery LED Indicator
(4) Power Switch
(5) Body
(6) Battery Compartment / Cover
(7) Frequency Recognition Cap
(6)
(7)
(3)
(1)
(2)
(4)
(5)
1. To connect the receiver module with DC power (8V),audio will come out from
amplifier.
2. Open battery cover (6) on handheld microphone, then insert 1.5V AA 2 battery
( Pay attention to the positive and negative pole).Close battery cover.
3. Turn on microphone power switch (4), power LED indicator (2) will light up, low
battery indicator (3) will flash once then off. When low battery indicator (3) lights
up red, it indicates battery power is low. Change battery for continuously use.
To use microphone, the sound will come out.
4. Remove the battery from microphone while idling the unit.
2. Operation Guide