WS-series Wireless Audio System User Manual WS-series Manual - JH 2010.01.13.
Table of Contents 1. IMPORTANT SAFETY INSTRUCTIONS 2. PACKAGE CONTENTS 3. PART NAMES AND FUNCTIONS 4. SETUP AND INSTALLATION 2 4 4 6 4.1 USAGE AND POWER (WS-T & WS-R) 6 4.2 RECHARGING BELTPACKS WITH THE WS-CH 7 4.3 RECHARGING A BELTPACK WITH THE WS-CR 7 4.4 POWER ON AND OFF (WS-T & WS-R) 7 4.5 MANUAL CHANNEL SELECTION (WS-T & WS-R) 7 4.6 AUTO CHANNEL SELECTION (WS-T & WS-R) 8 4.7 CONNECTING TO THE AUDIO INPUTS (WS-T) 8 4.8 CONNECTING HEADPHONES (WS-R) 8 4.9 SETTING VOLUME (WS-T & WS-R) 8 5.
1. IMPORTANT SAFETY INSTRUCTIONS Before using this product, read the instruction manual for important safety information. Please retain this manual for future reference and warranty information. Troubleshooting & Servicing Do not attempt to service or repair the device yourself. Refer all servicing to qualified service personnel. Do not attempt to modify the device in any way. Doing so could invalidate your warranty.
WS-R Receiver Beltpack 2. PACKAGE CONTENTS • NOTE: Package contents will vary depending on the kit configuration chosen.
WS-CR Charging Cradle 4.2 RECHARGING BELTPACKS WITH THE WS-CH WS-CR Power Adapter 1. Connect the power adapter (WS-CHP) to the wall outlet and then to the DC IN jack on the back of the WS-CH 4x Charger. 2. Connect up to 4 WS-T or WS-R beltpacks to the charging leads on the WS-CH unit. The beltpacks will immediately begin charging. A red LED on the WS-CH indicates the unit is charging. A green LED indicates that charging is complete. 3.
4.6 AUTO CHANNEL SELECTION (WS-T & WS-R) 1. First, power on all of the WS-T and WS-R beltpacks to be set on the same channel. Use the power on procedure in section 4.4. 2. For the WS-T, ensure that the channel you want to use is not already in use and that the frequency is clear of any interference. 3. Change the channel of the WS-T transmitter to the desired channel using the procedure in section 4.5. 4.
6. TROUBLESHOOTING 7. SPECIFICATIONS & FEATURES Issue Resolution The unit does not power on. Hold the Power button for 2-3 seconds. If the unit still does not power on, the unit may need to be recharged. The channel will not change. Check the back of the unit and make sure the channel lock is set to OFF. The walkie-talkie does not work. Check the back of the unit and make sure the walkie-talkie function is set to ON. The audio does not work. Check that the WS-T walkie-talkie switch is set to OFF.
WS-CH 4x Charger Features / Description Charges up to 4pcs WS-T or WS-R. Power Requirements WS-CHP Power adapter: 100-240VAC~5060Hz switching-type power adapter with DC 5V/6A output DC IN Jack ID / OD 2.0 / 5.5 mm Recharging Lead Plugs ID / OD 1.35 / 3.5 mm Recharging Lead Length 4” Product Dimensions 3.75” x 2.75” x 1.75” Product Weight (incl. accessories) 4 oz (WS-CH) + 11 oz (WS-CHP) = 15 oz (Total) WS-CR Charging Cradle Features / Description Charges one WS-T or WS-R.
Califone® International, Inc. 1145 Arroyo Avenue, #A San Fernando, CA 91340 USA Toll Free 800.722.0500 | Toll Free Fax 877.402.2248 International Customers call 818.407.2400 or Fax 818.407.2405 califone.com Califone WS-series Rev 01 0110 WS-series Manual - JH 2010.01.13.
FCC warning statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
