Instruction Manual

9. Thermometer and hygrometer
9.1 Maximum/Minimum function
• If the measure values above the range,then temperature display "HH.H",humidity display "HH%".
• If the measure values below the range,then temperature display "LL.L",humidity display "LL%".
• Press the MEM button in normal mode.
• MAX appears on the display.
• You can now get the highest values for the indoor temperature and humidity and outdoor temperature
since the last reset.
• Press the MEM button again.
-11-
• MIN appears on the display.
• You can now get the lowest values for the indoor temperature and humidity and outdoor temperature
since the last reset.
• Press the MEM button once more, to go back to the present values display.
• The device will automatically quit the MAX/MIN mode if no button is pressed.
• Press and hold the MEM button for two seconds while the maximum or minimum values are displayed
to clear the recorded readings.
9.2 Setting of the temperature unit
• In the normal mode you can change between ° C (Celsius) or ° F (Fahrenheit) as temperature unit.
•
Press the button.