Instruction Manual

• For having more than one additional outdoor transmitter select with the 1/2/3 switch in the battery
compartment of the outdoor transmitter for each single outdoor transmitter a different channel. The
reception of the new transmitter will be transmitted automatically to the receiver. Press and hold the
button on the receiver or restart the receiver according to the manual.
• The outdoor values will be shown on the display of the receiver. If you have installed more than one
outdoor transmitter, press the button on the receiver to change between the channels 1 to 3.
• You can also choose an alternating channel display. After the third channel, press the button
again, the numbers and temperature value of each channel will cycle display .
• Press the button again to deactivate the alternating channel and the first outdoor transmitter
will be shown permanently.
• Once registered outdoor transmitters (channels),which are no longer needed,can be deleted manually
by pressing the button for three seconds.Once a new outdoor transmitter is received, there
will be another indicator.
10. Additional outdoor transmitters
Note:
1.Each channel can be individually registered.(e.g.:hold button for three seconds in
channel 1, then channel 1 will deleted and re-register,channel 2 and 3 no changed).
2.After change the batteries of registered outdoor transmitters, it need hold button for
three seconds to re-register the transmitter.
-12-