Installation Instructions

Model: JH-01 zigbee
In/Out:125V AC/50/60Hz
Max.Current: 10A
RF Standard:Zigbee IEEE 802.15.4
Powered by:Live and Neutral
Material: pc,ABS VO
Weight:60g
Size:48X48X52mm
Product Parameter
Distinguishing Feature
Configuration Steps
Works with Amazon Alexa
SmartThings App
Without other Zigbee hub, directly
support Amazon Echo Smart
Speaker to config the controller.
After paired, you can use theAlexa
APP or Voice to control the device.
Support access to Samsung
SmartThings hub, Amazon Echo Plus,
Amazon Echo Show(2nd) ,eWeLink
hub or other HA and 3.0 hub.
Zigbee plug can be controlled by the
button on itself.
Confirm that the Blue LED of Zigbee
plug is flashing.If the indicator is
always on,press and hold the button
until it is flashing or powered off the
Zigbee plug and then power on for
3-8s.Repeat five times,then the plug
enter config mode, the green LED
will flash.
Confirm that the Blue LED of Zigbee
Plug is flashing.If the indicator is
always on, press and
hold the button until it is flashing or
powered off the Zigbee Plug and
then power on for 3-8s. Repeat five
times, then the Plug enter config
mode, the Green LED will flash.
”.secived ym revocsid ,axelA“ ,ksA
Wait for the Zigbee Plug Blue LED
indicator to be always on, and the
Plug is connected to echo plus or
echo show(2nd).
sihT”.gulp tsrfi no mu
t ,axelA“ ,ksA
will tum the Plug on.
2
3
4
5
1
You can use Amazon Alexa App to
and group,routines of modify device
names such as bedroom plug,At this
point you can use Alexa App or Voice
to control the devices.
2
3
4
5
Open the SmartThingS App and add
the Zigbee plug.When the green LED
indicator is always on ,the plug has
bee added to the smartThings hub,If
the App does not recognize the
device type, please refer to the
SmartThings Confign, pdf
document.
Enable SmartThings Skill in the
Amazon Alexa APP or alexa.ama-
zon.com
dda nac ”.secived ym revocsid“ ,ksA
zigbee Plug to amzon smart home.
You can use SmartThings App or
Amazon Alexa APP to add
group,routines or modify device
names such as bedroom plug,At this
point you can use Alexa App or Voice
to control the devices.
Work with Samsung SmartThings
hub&Amazon Alexa
1
SmartThings App and Alexa App
operation(Add device,group,
routines)
Alexa APP
ro dda ot”+“:kcilC:1
reset the device at the
upper right corner on
the all device list screen
in the smartThings APP.
noci ”knileWe“ tceleS:3
to add device on the
add device screen
ni”eciveD ddA“ tceleS:2
the pop-out window
eht no”txeN“ kcilC:4
default hub connection
interface
5:Choose the room you
want after entering this
interface ,or click“add
new room”then click
“next”
6:Do what app tells you
and wait patiently.
7: After the device is
successfully connected，
name the device and
”enoD“ kcilc
8: Return to the main
interface, device has been
added, and you will see
the device and you can
begin to set.
I: In the Alexa App
interface click“+” icon,
You can add devices and
groups. In the device list
interface you can control
or modify the device
type and name, as
shown in the following
picture.
2:In the Alexa App Smart
Home interface you can
operate the devices
conveniently
3:In the Alexa App
routines interface you
can set up some devices
,axelA“ ,k
sA(stneve dna
good morning,”It will
turn on the bedroom
lights,open the curtains,
and forecast the
weather,traffic
conditions, to-do items,
etc..）
FCC ID: 2AXSO-JH-01
This device complies with part 15 of
the FCC Rules. Operation is subject to
the following two conditions: (1) This
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
FCC warning:
Any Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.
Note: This equipment has been
tested and found to comply with the
limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving
antenna.
-Increase the separation between the
equipment and receiver.
-Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced
radio/TV technician for help.
This equipment complies with FCC
radiation exposure limits set forth for
an uncontrolled environment. This
equipment should be installed and
operated with minimum distance 20cm
between the radiator & your body.