User's Manual

1414
TOLL FREE: 1-877-646-5288
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base
is unplugged from the power source before
inserting or removing any attachment and
before cleaning.
CAUTION: DO NOT immerse the motor base
into water or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base and dough station
with a damp cloth and wipe dry.
WARNING: DO NOT put the dough station
in the dishwasher.
3 Place the pitcher and bowl in the
dishwasher. Place the lids and attachments
on the top rack. Use caution when handling
the blade assemblies as the blades are
very sharp.
NOTE: You may also wash the containers
by filling ¾ of the container with warm
water and a drop of dish washing detergent,
placing the corresponding lid on the
container and pressing the pulse button
a few times. Once clean, remove the
container from the motor base. Rinse the
container, attachment and lid under running
water. Allow all the parts to dry before
storing.
Please call customer service if any servicing
needs to be performed on the appliance at
1-877-646-5288.
HOW TO STORE
1 Store the Ninja
®
Kitchen System 1100™
upright with the pitcher on the motor base,
6-Blade assembly inside the pitcher and
lid on the pitcher. Do not place anything
on top. Store the bowl with the 4-Blade
assembly inside and the lid on top. Keep
the bowl, dough station and the rest of
the attachments along side the appliance
where it will not be damaged and won’t
cause hazard.
2 Tuck power cord in cord storage
compartment in the back of the motor base.
RESETTING THE MOTOR THERMOSTAT
The Ninja
®
Kitchen System 1100™ features
a unique safety system which prevents
damage to the unit’s motor and drive
system should you inadvertently overload
your appliance. If the appliance is being
overloaded, the motor will stop and the
power light will remain lit and speeds 1,
2 and 3 will flash. To reset the appliance,
follow the resetting procedure below:
1 Unplug the appliance from the electrical
outlet.
2 Remove and empty the container and
ensure that no food is jamming the
cutting blades or attachments.
3 Allow the appliance to cool for
approximately 15 minutes.
4 Re-install the container onto the base
and re-plug the appliance into the
electrical outlet.
5 Proceed to use the appliance as
before making sure not to exceed the
recommended maximum capacities.
NJ602_series_30_IB_ENG_120427_2.indd 14 12-04-30 8:44 AM